CREE LM1-PWN1-11-N1

Cree® SMD LED
Model # LM1-PWN1-11-N1
Data Sheet
120-degree, 3.2 x 2.7 mm, power SMD in white color with water-transparent lens
Applications
•
•
•
•
Indicators
Illuminations
LCD Back Lights
Automobile Applications
Absolute Maximum Ratings (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
IF
30
mA
IFP
100
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
130
mW
Operation Temperature
Topr
-40 ~ +100
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Junction Temperature
TJ
110
°C
RTHJA
350
°C/W
RTHJS
200
°C/W
Forward Current
Peak Forward Current
Junction/Ambient
Note 1
Note 2
Junction/Solder Point
Notes:
1.
2.
Pulse width ≤0.1 msec, duty ≤1/10.
Rth test condition: mounted on PCB FR4 (pad size ≥16 mm2)
D-CT151.000
Data Sheet: CL
Typical Electrical & Optical Characteristics (TA = 25°C )
Characteristics
Symbol
Condition
Forward Voltage
VF
IF = 30 mA
V
Reverse Current
IR
VR = 5 V
μA
Luminous Intensity
IV
IF = 30 mA
mcd
Chromaticity
Coordinates
x
IF = 30 mA
0.31
y
IF = 30 mA
0.32
2θ½
IF = 30 mA
50% Power Angle
Unit
Minimum
deg
Subject to change without notice.
www.cree.com/ledlamps
Typical
Maximum
3.6
4.2
10
450
780
120
Standard Bins for LM1-PWN1-11-N1 (IF = 30 mA)
Lamps are sorted to luminous intensity (IV) and chromaticity coordiates (x,y) bins shown.
Orders for LM1-PWN1-11-N1 may be filled with any or all bins contained as below.
All luminous intensity (IV) and chromaticity coordinates (x,y) values shown and specified are at IF = 30 mA.
A1
A2
B1
B2
c
W1 or
above
Luminous Intensity (IV)
1120 mcd
V2
900 mcd
V1
710 mcd
U2
560 mcd
U1
450 mcd
Chromaticity Coordinates (x,y)
Rank
Chromaticity x
Coordinates y
A1
A2
0.245
0.264
0.280
0.264
0.264
0.283
0.296
0.280
0.283
0.307
0.313
0.296
0.229
0.267
0.248
0.220
0.267
0.305
0.276
0.248
0.305
0.337
0.297
0.276
Rank
Chromaticity x
Coordinates y
B1
B2
c
0.307
0.330
0.330
0.313
0.330
0.361
0.356
0.330
0.337
0.360
0.318
0.297
0.360
0.385
0.351
0.318
Important Notes:
1. All ranks will be included per delivery; rank ratio will be based on the dice distribution.
2. Tolerance of measurement of luminous intensity is ±10%.
3. Tolerance of measurement of color coordinates is ±0.01.
4. Tolerance of measurement of VF is ±0.05 V.
5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document.
6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT151.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
CIE Chromaticity Diagram
CIE
CIE Chromaticity Diagram
0.90
520
530
0.80
540
510
550
0.70
560
0.60
570
490
0.50
Y
580
590
0.40
600
c
610
620
630
B2
0.30
B1
480
A2
A1
0.20
470
0.10
460
0.00
0.00
0.10
0.20
0.30
4/5
X
0.40
0.50
0.60
CLD-CT151.000
0.80
Format #: COTCO-D-074
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
0.70
REV.4
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Document No. SPE/LM1-PWN1-11-N1
Rev. No.
03
Graphs
Graphs
If (mA)
100.0
-40
-50
-30
-10
-20
0
0.0
Vr(V)
80.0
-10.0
60.0
-20.0
40.0
-30.0
-40.0
20.0
0.0
3.0
Vf(V)
3.4
3.8
4.2
Ir(uA)
FIG.2 REVERSE CURRENT VS.
REVERSE VOLTAGE.
5.0
4.6
FIG.1 FORWARD CURRENT VS.
FORWARD VOLTAGE.
-50.0
Half Power WL=150nm
2.5
100%
2.0
75%
1.5
50%
1.0
25%
0.5
0.0
0.0
0%
If(mA)
20.0 40.0 60.0
80.0 100.0
FIG.3 RELATIVE LUMINOUS INTENSITY VS.
IF(mA)
600
700
800
50% Power Angle :
40
Ie(%)
0
Rth j-s=200 C/W
100%
30
80%
20
60%
10
0
40%
Rth j-a=350 C/W
20%
T ( C)
0
20
40
60
80
100
-90
FIG.5 MAXIMUM FORWARD DC CURRENT VS
TEMPERATURE. DERATING BASED ON Tjmax=110 C
Items
500
WAVELENGTH.
FORWARD CURRENT
50
400
FIG.4 RELATIVE LUMINOUS INTENSITY VS.
-30
-60
0
30
90
0%
FIG.6 FAR FIELD PATTERN.
Signatures
Date
Prepared by
WangFJ
2007-04-26
Rev.No
Checked by
XieJH
2007-04-26
02
2005-08-09 Release.
Approved by
DavidLiu
2007-04-26
03
2007-04-26 Change tolerance of CIE(x,y) from +/-0.015 to +/-0.01
FCN#
Revision History
Date
Change Description
FCN20070103
Data is subject to change without prior notice; please refer to COTCO Website for the latest version.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo
are registered trademarks
Cree, Inc.
[email protected]
Cotco of
International
Ltd.
60
CLD-CT151.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Document No. SPE/LM1-PWN1-11-N1
Rev. No.
03
Mechanical Dimensions
Dimension Drawing
All dimensions are in mm.
cations
ngs at Ta = 25°C
in
Absolute maximum
ymbol
Rating
Unit
IF
30
mA
IFP
100
mA
VR
5
V
PD
130
mW
Topr
-40 ~ + 100
°C
Tstg
-40 ~ + 100
°C
Tj
+110
°C
Rth JA
350
°C/W
Rth JS
200
°C/W
2
uty <=1/10 ** Rth test condition: Mounted on PC Board FR 4(pad size>=16mm )
ical Characteristics ( Ta = 25°C)
Symbol
Condition
Min.
Typ.
Max.
Unit
VF
IF = 30mA
---
3.6
4.2
V
IR
VR = 5V
---
---
10
PA
450
780
---
mcd
---
0.31
---
---
IV
x
Notes I = 30mA
F
RoHS Compliance
IF = 30mA
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
y
I = 30mA
--0.32
----thresholdF limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment
amended through
--- April 21, 2006.
120
--deg
2 T½ (RoHS), Ias
F = 30mA
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT151.000
2/5
Format #: COTCO-D-074
REV.4
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage,
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED
Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following
manner:
Standard/Custom
0: Standard
C: Custom
VF
0: Full forward voltage distribution
1~9, A~Z . . . : special request *
Wd/Color
1: Full-color distribution
2~9, A~Z . . . : special request *
aaaaaaaaa-aaa-aa- x x x x x
IV
0: Full luminous intensity distribution
1~9, A~Z . . . : special request *
Packing type
0: Standard = tape pack
1~9, A~Z . . . : special request *
Product P/N
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number
Description
LM1-PWN1-11-N1-00001
SMD 120 White, FULL RANK, Tape & Reel
LM1-PWN1-11-N1-00002
SMD 120 White, A1, A2, B1, B2, Tape & Reel
* Please contact your Cree representative about the availability of non-standard kits.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT151.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps