Cree® SMD LED Model # LM1-THR1-11-N1 Data Sheet 120-degree, 3.2 x 2.7 mm, power SMD LED in red color with water-transparent lens Applications • • • • • Indicators Illuminations LCD Back Lights Automobile Applications RGB Full-Color Displays Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit IF 70 mA IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 225 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C RTHJA 300 °C/W RTHJS 150 °C/W Forward Current Peak Forward Current Junction/Ambient Note 1 Note 2 Junction/Solder Point Notes: 1. 2. Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on PCB FR4 (pad size ≥16 mm2) D-CT183.000 Data Sheet: CL Typical Electrical & Optical Characteristics (TA = 25°C ) Characteristics Symbol Condition Unit Forward Voltage VF IF = 50 mA V Reverse Current IR VR = 5 V Luminous Intensity IV IF = 50 mA Dominant Wavelength 50% Power Angle D 2 ½ Minimum Typical Maximum 2.5 3.2 A 10 mcd 560 900 IF = 50 mA nm 620 628 IF = 50 mA deg Subject to change without notice. www.cree.com/ledlamps 635 120 Standard Bins for LM1-THR1-11-N1 (IF = 50 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( ) bins shown. D Orders for LM1-TYL1-11-N1 may be filled with any or all bins contained as below. Luminous Intensity (IV) All luminous intensity (IV) and dominant wavelength ( ) values shown and specified are at IF = 50 mA. D W2 or above 1400 mcd W1 1120 mcd V2 900 mcd V1 710 mcd U2 560 mcd 620 nm 635 nm Dominant Wavelength ( ) D Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of the dominant wavelength is ±1 nm. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT183.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. SPE/LM1-THR1-11-N1 Rev. No. 01 Graphs Graphs 100.0 If (mA) -50 -60 -40 -20 -30 -10 0.0 Vr(V) 80.0 -10.0 60.0 -20.0 40.0 -30.0 20.0 -40.0 0.0 2.0 2.6 2.8 3.0 2.2 2.4 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. Vf(V) Ir(uA) -50.0 FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. Half Power WL=23nm Domi WL= 628nm 2.5 100% 2.0 75% 1.5 50% 1.0 25% 0.5 0% 400 If(mA) 0.0 20.0 40.0 60.0 80.0 100.0 FIG.3 RELATIVE INTENSITY VS. FORWARD CURRENT IF(mA) 700 WL(nm) 800 50% Power Angle : Rth j-s=150 C/W 80 600 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. 0.0 100 500 Ie(%) 0 100% 60 80% 60% 40 Rth j-a=300 C/W 20 0 40% 20% T ( C) 0 20 40 60 80 100 -90 FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C Items Signatures Date Prepared by Meiliping 2005-07-28 Checked by XieJH 2005-07-28 Approved by DavidLiu 2005-07-28 FCN# -60 -30 0 30 60 90 0% FIG.6 FAR FIELD PATTERN Revision History Rev.No Date Change Description FCN20050260 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT183.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. SPE/LM1-THR1-11-N1 Rev. No. 01 Mechanical Dimensions Dimension Drawing All dimensions are in mm. cations splays ings at Ta = 25°C ymbol Absolute maximum Rating Unit IF 70 mA IFP 200 mA VR 5 V PD 225 mW Topr -40 ~ + 100 °C Tstg -40 ~ + 100 °C Tj +110 °C Rth JA 300 °C/W Rth JS 150 °C/W 2 uty <=1/10 ** Rth test condition: Mounted on PC Board FR 4(pad size>=16mm ) ical Characteristics ( Ta = 25°C) Symbol Condition Min. Typ. Max. Unit VF IF = 50mA --- 2.5 3.2 V --- --- 10 PA IF = 50mA 560 900 --- mcd IF = 50mA --- 120 --- deg IR Notes VR = 5V RoHS Compliance IV The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU DirecIF = 50mA 620 628 635 nm in electrical and electronic equipment OD tive 2002/95/EC on the restriction of the use of certain hazardous substances (RoHS), as amended through April 21, 2006. 2 T½ Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2/4 CLD-CT183.000 Format #: COTCO-D-074 REV.4 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * aaaaaaaaa-aaa-aa- x x x x x IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = tape pack 1~9, A~Z . . . : special request * Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LM1-THR1-11-N1-00001 Description SMD 120 High Red 628nm, FULL RANK, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT183.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps