Cree® SMD LED Model # LM2-TYL1-F1-N1 Data Sheet 60-degree, 3.2 x 2.7 mm, power SMD LED in amber color with water-transparent lens Applications • • • • • • Traffic Lights Backlighting (such as LCDs, switches, keys, displays, illuminated advertising) Interior and Exterior Automotive Lighting (such as dashboards, backup and brake lights) Substitution for Micro Incandescent Lamps Marker Lights (such as steps and exits) Signal and Symbol Luminaires Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit IF 70 mA IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 225 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C RTHJA 300 °C/W RTHJS 150 °C/W Forward Current Peak Forward Current Junction/Ambient Note 1 Note 2 Junction/Solder Point Notes: 1. 2. Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on PCB FR4 (pad size ≥16 mm2) D-CT187.000 Data Sheet: CL Typical Electrical & Optical Characteristics (TA = 25°C ) Characteristics Symbol Condition Unit Forward Voltage VF IF = 50 mA V Reverse Current IR VR = 5 V μA Luminous Flux ΦV IF = 50 mA mlm Luminous Intensity IV IF = 50 mA mcd 1120 1800 Dominant Wavelength λD IF = 50 mA nm 584 591 2θ½ IF = 50 mA deg 50% Power Angle Minimum Subject to change without notice. www.cree.com/ledlamps Typical Maximum 2.6 3.2 10 2500 596 60 Standard Bins for LM2-TYL1-F1-N1 (IF = 50 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown. Orders for LM2-TYL1-F1-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength (λD) values shown and specified are at IF = 50 mA. Y1 or above Luminous Intensity (IV) 2800 mcd X2 2240 mcd X1 1800 mcd W2 1400 mcd W1 1120 mcd 584 nm 596 nm Dominant Wavelength (λD) Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of the dominant wavelength is ±1 nm. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT187.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. SPE/LM2-TYL1-F1-N1 Rev. No. 03 Graphs Graphs 100.0 If (mA) -50 -60 -20 -30 -40 -10 0.0 Vr(V) 80.0 -10.0 60.0 -20.0 40.0 -30.0 20.0 0.0 2.0 2.2 2.4 2.6 2.8 3.0 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. -40.0 Vf(V) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. Half Power WL=20nm Domi WL= 591nm 2.5 2.0 100% 1.5 75% 1.0 50% 0.5 25% If(mA) 0.0 0% 400 0.0 20.0 40.0 60.0 80.0 100.0 FIG.3 RELATIVE LUMINOUS INTENSITY VS. 100 40 Rth j-s=150 C/W 30 20 WL(nm) 800 700 10 0 1.0 50 0.8 60 40 Rth j-a=300 C/W 20 T ( C) 0 20 40 60 80 100 60 0.6 70 0.4 80 0.2 90 0 100 FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C Items 600 50% Power Angle : IF(mA) 80 500 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. FORWARD CURRENT. 0 -50.0 Ir(uA) 1.0 0.8 0.6 0.4 0 20 40 60 80 110 100 FIG.6 FAR FIELD PATTERN. Signatures Date Prepared by WangFJ 2007-03-16 Rev.No Checked by XieJH 2007-03-16 02 2005-08-09 Release. Approved by DavidLiu 2007-03-16 03 2007-03-16 Cancel cover page Description:60 Degree FCN# Revision History Date Change Description FCN20070080 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT187.000 4/4 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Format #: COTCO-D-074 REV.4 Document No. SPE/LM2-TYL1-F1-N1 Rev. No. 03 Mechanical Dimensions Dimension Drawing ,Switches,Keys,Displays,Illuminated All dimensions are in mm. ior Automotive Lighting(e.g. Dashboard ke Lights) cro Incandescent Lamps . Steps,Exit Ways,Etc.) ol Luminaire Ratings at Ta = 25°C * e Symbol Absolute maximum Rating Unit IF 70 mA IFP 200 mA VR 5 V PD 225 mW Topr -40 ~ + 100 °C Tstg -40 ~ + 100 °C Tj +110 °C Rth JA 300 °C /W Rth JS 150 °C /W 2 duty <=1/10 ** Rth test condition: Mounted on PC Board FR 4(pad size>=16mm ) Optical Characteristics ( Ta = 25°C) h Symbol Condition Min. Typ. Max. Unit VF IF =50mA --- 2.6 3.2 V IR VR = 5V --- --- 10 PA --- 2500 --- mlm Notes ĭRoHS IF = 50mA V Compliance levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or IThe IF =50mA 1120 1800 --mcd V otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive on the restriction of certain hazardous substances IF =50mA 584 of the use591 596 nm in electrical and electronic equipment OD 2002/95/EC (RoHS), as amended through April 21, 2006. 2 T½ IF = 50mA --- 60 --- deg Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2/4 CLD-CT187.000 Format #: COTCO-D-074 REV.4 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * aaaaaaaaa-aaa-aa- x x x x x IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = tape pack 1~9, A~Z . . . : special request * Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LM2-TYL1-F1-N1-00001 Description SMD 60 Amber 591nm, FULL RANK, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT187.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps