CREE LM3-PBL1-01-N1

Cree® SMD LED
Model # LM3-PBL1-01-N1
Data Sheet
120-degree, 2.7 x 2.0 mm, SMT LED in blue color with water-transparent lens
Applications
•
•
•
•
•
Indicators
Illuminations
LCD Back Lights
Automobile Applications
RGB Full-Color Displays
Absolute Maximum Ratings (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
IF
25
mA
IFP
100
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
100
mW
Operation Temperature
Topr
-40 ~ +100
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Junction Temperature
TJ
110
°C
RTHJA
450
°C/W
RTHJS
300
°C/W
Forward Current
Peak Forward Current
Junction/Ambient
Note 1
Note 2
Junction/Solder Point
Notes:
1.
2.
Pulse width ≤0.1 msec, duty ≤1/10.
Rth test condition: mounted on PCB FR4 (pad size ≥16 mm2)
D-CT155.000
Data Sheet: CL
Typical Electrical & Optical Characteristics (TA = 25°C )
Characteristics
Symbol
Condition
Unit
Forward Voltage
VF
IF = 20 mA
V
Reverse Current
IR
VR = 5 V
μA
Luminous Intensity
IV
IF = 20 mA
mcd
112
160
λD
IF = 20 mA
nm
460
470
2θ½
IF = 20 mA
deg
Dominant Wavelength
50% Power Angle
Minimum
Subject to change without notice.
www.cree.com/ledlamps
Typical
Maximum
3.4
4.0
10
480
120
Standard Bins for LM3-PBL1-01-N1 (IF = 20 mA)
Lamps are sorted to luminous intensity (IV) and chromaticity coordiates (x,y) bins shown.
Orders for LM3-PBL1-01-N1 may be filled with any or all bins contained as below.
Luminous Intensity (IV)
All luminous intensity (IV) and chromaticity coordinates (x,y) values shown and specified are at IF = 20 mA.
T1 or
above
280 mcd
S2
224 mcd
S1
180 mcd
R2
140 mcd
R1
112 mcd
460 nm
480 nm
Dominant Wavelength (λD)
Important Notes:
1. All ranks will be included per delivery; rank ratio will be based on the dice distribution.
2. Tolerance of measurement of luminous intensity is ±10%.
3. Tolerance of measurement of the dominant wavelength is ±1 nm.
4. Tolerance of measurement of VF is ±0.05 V.
5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document.
6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
8. Do not handle the device by the SMD surface. Care must be taken to avoid damage to the SMD surface or the
interior of the device, which can be damaged by excessive force to the SMD surface.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT155.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Document No. SPE/LM3-PBL1-01-N1
Rev. No.
02
Graphs
Graphs
If (mA)
100.0
-50
-40
-20
-30
-10
0
0.0
Vr(V)
80.0
-10.0
60.0
-20.0
40.0
-30.0
-40.0
20.0
Vf(V)
0.0
3.0
3.4
3.8
4.2
Ir(uA)
5.0
4.6
FIG.2 REVERSE CURRENT VS.
REVERSE VOLTAGE.
FIG.1 FORWARD CURRENT VS.
FORWARD VOLTAGE.
Half Power WL=28nm
Domi WL= 470nm
5.0
100%
4.0
3.0
75%
2.0
50%
1.0
25%
If(mA)
0.0
0.0
20.0 40.0 60.0
0%
300
80.0 100.0
400
500
600
WL(nm)
700
FIG.4 RELATIVE LUMINOUS INTENSITY VS.
WAVELENGTH.
FIG.3 RELATIVE LUMINOUS INTENSITY VS.
FORWARD CURRENT
50
-50.0
IF(mA)
50% Power Angle :
Ie(%)
0
40
100%
Rth j-s=300 C/W
80%
30
60%
20
40%
10
0
Rth j-a=450 C/W
0
20
40
60
20%
T ( C)
80
100
-90
FIG.5 MAXIMUM FORWARD DC CURRENT VS
TEMPERATURE. DERATING BASED ON Tjmax=110 C
Items
Signatures
Date
Prepared by
MaAiQiu
2006-06-22
Rev.No
Checked by
XieJH
2006-06-22
02
Approved by
David Liu
2006-06-22
FCN#
-60
-30
0
60
90
0%
FIG.6 FAR FIELD PATTERN
Revision History
Date
Change Description
2006-06-22 Release, remove Iv rank Q1,Q2, add S1,S2. add important notes 8)
FCN20060211
Data is subject to change without prior notice. please refer to COTCO Website for the latest version.
[email protected] Cotco International Ltd.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
30
CLD-CT155.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Document No. SPE/LM3-PBL1-01-N1
Rev. No.
02
Dimension Drawing
Mechanical Dimensions
All dimensions are in mm.
cations
plays
ngs at Ta = 25°C
ymbol
Absolute maximum
Rating
Unit
IF
25
mA
IFP
100
mA
VR
5
V
PD
100
mW
Topr
-40 ~ + 100
°C
Tstg
-40 ~ + 100
°C
Tj
+110
°C
Rth JA
450
°C/W
Rth JS
300
°C/W
2
uty <=1/10 ** Rth test condition: Mounted on PC Board FR 4(pad size>=16mm )
cal Characteristics ( Ta = 25°C)
Symbol
Condition
Min.
Typ.
Max.
Unit
VF
IF = 20mA
---
3.4
4.0
V
---
---
10
PA
112
160
---
mcd
IR
IV
OD
NotesVR = 5V
RoHS Compliance
IF = 20mA
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
IF = limits)
20mA permitted
460
470
480 in an exempted
nm application, in accordance with EU Directhreshold
for such substances,
or are used
tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(RoHS), as amended through April 21, 2006.
IF = 20mA
2 T½
---
120
---
deg
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT155.000
2/4
Format #: COTCO-D-074
REV.4
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage,
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED
Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following
manner:
Standard/Custom
0: Standard
C: Custom
VF
0: Full forward voltage distribution
1~9, A~Z . . . : special request *
Wd/Color
1: Full-color distribution
2~9, A~Z . . . : special request *
aaaaaaaaa-aaa-aa- x x x x x
IV
0: Full luminous intensity distribution
1~9, A~Z . . . : special request *
Packing type
0: Standard = tape pack
1~9, A~Z . . . : special request *
Product P/N
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number
LM3-PBL1-01-N1-00001
Description
SMD 120 Blue 470nm, FULL RANK, Tape & Reel
* Please contact your Cree representative about the availability of non-standard kits.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT155.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps