Cree® SMD LED Model # LM6-THR1-03-N1 Data Sheet 120-degree, 3.3 x 3.5-mm, SMT LED in red color with water-transparent lens Applications • • • • Indoor and Outdoor Displays Backlighting Coupling into Light Guides RGB Full-Color Displays Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit R Forward Current IF 3 x 50 mA IFP 3 x 200 mA Reverse Voltage VR 5 V Power Dissipation PD 3 x 160 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C RTHJA 450 °C/W RTHJA 650 °C/W Junction/solder point 1 chip on RTHJS 300 °C/W Junction/solder point 3 chips on RTHJS 450 °C/W Note 1 Peak Forward Current Note 2 Junction/ambient 1 chip on Note 3 Junction/ambient 3 chips on Note 3 Notes: D-CT179.000 Data Sheet: CL 1. 2. 3. Single-color light. Pulse width ≤0.1 msec, duty ≤1/10. RTH test condition: mounted on PC Board FR 4 (pad size ≥16 mm2) Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Condition Symbol Minimum Typical Maximum 621 628 636 Dominant Wavelength IF = 3 x 20 mA λDOM Viewing Angle at 50% IF = 3 x 20 mA 2θ½ 120 Forward Voltage IF = 3 x 20 mA VF 2.5 Luminous Intensity IF = 3 x 20 mA IV VR = 5 V IR Reverse Current (max) 710 Subject to change without notice. www.cree.com/ledlamps Unit nm deg 3.2 1100 V mcd 10 μA Standard Bins for LM6-THR1-03-N1 (IF = 3 x 20 mA) Lamps are sorted to luminous intensity (IV) and chromaticity coordinates (x,y) bins shown. Orders for LM6-THR1-03-N1 may be filled with any or all bins contained as below. Luminous Intensity (IV) All luminous intensity (IV) and chromaticity coordinates (x,y) values shown and specified are at IF = 3 x 20 mA. X1 or above 1800 mcd W2 1400 mcd W1 1120 mcd V2 900 mcd V1 710 mcd 621 nm 636 nm Dominant Wavelength (WD) Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of the dominant wavelength is ±1 nm. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT179.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. Rev. No. Graphs Graphs 100.0 If (mA) -50 -60 -40 -30 -20 -10 0.0 Vr(V) 80.0 -10.0 60.0 -20.0 40.0 -30.0 20.0 0.0 2.2 2.6 2.8 3.0 3.2 2.4 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. RELATIVE LUMINOUS INTENSITY SPE/LM6-THR1-03-N1 03 -40.0 Vf(V) -50.0 Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. Half Power WL=23nm Domi WL= 628nm 5.0 4.0 100% 3.0 75% 2.0 50% 1.0 25% If(mA) 0.0 0.0 WL(nm) 500 600 700 800 900 FIG.4 RELATIVE INTENSITY VS. 20.0 40.0 60.0 80.0 100.0 0% 400 FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT WAVE LENGTH. IF(mA) 100 50% Power Angle : Ie(%) 0 80 100% 1 CHIP ON 60 80% 60% 40 40% 20 0 20% 3 CHIP ON 0 20 40 60 T ( C) -90 100 80 FIG.5 MAXIMUM FORWARD DC CURRENT VS SOLDER POINT TEMPERATURE -30 -60 0 30 60 90 0% FIG.6 FAR FIELD PATTERN. IF(mA) 100 80 1 CHIP ON 60 40 20 0 3 CHIP ON 0 20 40 T ( C) 60 80 100 FIG.7 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE Items Signatures Date Prepared by WangFJ 2007-04-06 Rev.No Checked by XieJH 2007-04-06 02 2007-03-27 Release. Approved by DavidLiu 2007-04-06 03 2007-04-06 Delete WD rank FCN# Revision History Date Change Description FCN20070101 Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Data is subject to change without prior notice ; please refer to COTCO Website for the latest version. CLD-CT179.000 Copyright@2002 Cotco International Ltd. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps isplays Mechanical Dimensions Document No. Rev. No. Dimension Draw ing SPE/LM6-THR1-03-N1 03 All dimensions are in mm. ides ays ngs at Ta = 25°C Symbol Absolute maximum Rating Unit IF 3X50 mA IFP 3X200 mA VR 5 V PD 3X160 mW Topr -40~+100 °C Tstg -40~+100 °C Tj +110 °C 3 Rth JA 450 °C/W 3 Rth JA 650 °C/W on Rth JS 300 °C/W on Rth JS 450 °C/W 3 y <=1/10* Rth test condition: Mounted on PC Board FR 4(pad size>=16mm2) cal Characteristics(Ta = 25°C) Symbol Condition Min. Typ. Max. Unit Odom IF=3X20mA 621 628 636 nm 2 T½ IF=3X20mA --- 120 --- Deg. RoHS Compliance VF IF=3X20mA -- 2.5 3.2 V Notes The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwiseIFrestricted in this product are below the -maximum concentration values (also referred to as the Iv =3 X 20mAmaterials710 1100 mcd threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc2002/95/EC of the use---of certain hazardous substances Itive VR=5Von the restriction --10 PA in electrical and electronic equipment R (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2/4 CLD-CT179.000 Format #: COTCO-D-074 REV.4 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * aaaaaaaaa-aaa-aa- x x x x x IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = tape pack 1~9, A~Z . . . : special request * Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LM6-THR1-03-N1-00001 Description SMD 120 High Red 628nm, FULL RANK, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT179.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps