Cree® 5-mm Oval LED Model # LO566TWR1-70P-A1 Data Sheet 70-degree, 5-mm round LED lamp in warm white color with water-transparent lens and stopper Applications • • • Indicators LCD Back Light Illuminations Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit IF 25 mA IFP 100 mA Reverse Voltage VR 5 V Power Dissipation PD 100 mW Operation Temperature Topr -40 ~ +95 °C Storage Temperature Tstg -40 ~ +100 °C Lead Soldering Temperature Tsol Forward Current Peak Forward Current Note Max. 260°C for 3 sec. max. (3 mm from the base of the epoxy bulb) Note: Pulse width ≤0.1 msec, duty ≤1/10. D-CT105.000 Data Sheet: CL Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Symbol Condition Unit Forward Voltage VF IF = 20 mA V Forward Voltage VF IF = 1.0 µA V Reverse Current IR VR = 5 V μA Luminous Intensity IV IF = 20 mA mcd Chromaticity Coordinates x IF = 20 mA Color Temperature 50% Power Angle Minimum Typical Maximum 3.4 4.0 1.7 2.5 100 770 1500 0.426 y IF = 20 mA CCT IF = 20 mA K 0.393 3000 2θ½H-H IF = 20 mA deg 70 2θ½V-V IF = 20 mA deg 40 Subject to change without notice. www.cree.com/ledlamps Standard Bins for LO566TWR1-70P-A1 (IF = 20 mA) Lamps are sorted to luminous intensity (IV) and chromaticity coordinates (x,y) bins shown. Orders for LO566TWR1-70P-A1 may be filled with any or all bins contained as below. All luminous intensity (IV) and chromaticity coordinates (x,y) values shown and specified are at IF = 20 mA. Luminous Intensity (IV) D E F V or above 2130 mcd U 1520 mcd T 1100 mcd S 770 mcd Chromaticity Coordinates (x,y) Rank Chromaticity x Coordinates y D E F 0.3541 0.3610 0.4030 0.3822 0.3822 0.4030 0.4490 0.4129 0.4129 0.4490 0.5080 0.4588 0.3401 0.3900 0.4250 0.3580 0.3580 0.4250 0.4530 0.3725 0.3725 0.4530 0.4720 0.3838 Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Pb content <1000 ppm. 3. Tolerance of measurement of luminous intensity is ±15%. 4. Tolerance of measurement of the chromaticity coordinates is ±0.01. 5. Tolerance of measurement of VF is ±0.05 V. 6. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 7. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 8. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT105.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps CIE Chromaticity Diagram CIE CIE Chromaticity Diagram 0.90 520 530 0.80 540 510 550 0.70 560 0.60 570 490 0.50 Y 580 E 0.40 0.30 590 F 600 D 610 620 630 480 0.20 470 0.10 460 0.00 0.00 0.10 0.20 0.30 X 4/5 0.40 0.50 0.60 CLD-CT105.000 0.80 Format #: COTCO-D-074 REV.4 Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 0.70 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. SPE/LO566TWR1-70P-A1 Rev. No. 03 Graphs Graphs 100.0 If (mA) Vr(V) -40 -50 -30 -10 -20 0 0.0 80.0 -10.0 60.0 -20.0 40.0 -30.0 -40.0 20.0 Vf(V) 0.0 3.0 3.4 3.8 4.2 4.6 Ir(uA) FIG.2 REVERSE CURRENT VS. 5.0 FIG.1 FORWARD CURRENT VS. -50.0 REVERSE VOLTAGE. FORWARD VOLTAGE. Half Power WL=150nm 5.0 100% 4.0 75% 3.0 50% 2.0 25% 1.0 If(mA) 0.0 0.0 20.0 40.0 60.0 0% 80.0 100.0 400 500 600 700 800 FIG.3 RELATIVE LUMINOUS INTENSITY VS. FIG.4 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT WAVELENGTH. 50 IF(mA) H-H : 70 V-V : 40 50% Power Angle : H-H 40 V-V Ie(%) 0 100% 30 80% 20 60% 10 0 40% Ta( C) 0.0 20.0 40.0 60.0 20% 80.0 100.0 -90 FIG.5 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=105 C) Items -60 -30 0 30 60 90 0% FIG.6 FAR FIELD PATTERN Signatures Date Prepared by LiuZM 2007-04-26 Rev. No Checked by HuangJD 2007-04-26 02 2006-06-09 Release. IV from T,U,V(typ)1600 to S,T,U(typ)1500mcd. Approved by David 2007-04-26 03 2007-04-26 Change tolerance of CIE(x,y) from +/-0.015 to +/-0.01 FCN# Revision History Date Change Description FCN20070432 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT105.000 5/5 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Format #: COTCO-D-074 REV.4 Mechanical Dimensions Document No. SPE/LO566TWR1-70P-A1 Rev. No. 03 All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxyDmay imebens0.5 iomm n Dmax. rawing C ute maximum Unit Rating 25 mA 100 mA 5 V 100 mW 40 ~ +95 °C 0 ~ +100 °C 260°CNotes for 3 sec Max. m the base of the epoxy bulb) RoHS Compliance stics The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc= 25 ) on the restriction of the use of certain hazardous substances in electrical and electronic equipment ( tive Ta 2002/95/EC (RoHS), as amended through April 21, 2006. °C Vision Advisory Claim Condition Min. not to stare at the Typ. Max. The bright light Unit Users should be cautioned light of this LED product. can damage the eye. IF = 20mA --- 3.4 4.0 V © 2007 Cree, Inc. All 1.7 rights reserved. The information in this document is subject to change --2.5without notice. Cree and theV IF = Copyright 1.0P$ Cree logo are registered trademarks of Cree, Inc. VR = 5V CLD-CT105.000 --- --- 100 PA Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * aaaaaaaaa-aaa-aa- x x x x x IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = Bulk pack 1~9, A~Z . . . : special request * Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LO566TWR1-70P-A1-00001 Description 5mm Oval 70 Warm White, FULL RANK, Bulk Pack * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT105.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps