CREE LP377TYL1-70G-01

Cree® P4 LED
Model # LP377TYL1-70G-01
Data Sheet
70-degree, 7.6 x 7.6 mm LED lamp in amber color with water-transparent lens and stopper
Applications
•
•
•
•
Advertising Signs
Indicators
Traffic Signals
Automotive Lighting
Absolute Maximum Ratings (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
IF
70
mA
IFP
200
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
220
mW
Operation Temperature
Topr
-40 ~ +100
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Lead Soldering Temperature
Tsol
Forward Current
Note 2
Peak Forward Current
Note 1
Max. 260°C for 3 sec. max.
(3 mm from the base of the epoxy bulb)
Notes:
1.
2.
Pulse width ≤0.1 msec, duty ≤1/10.
A heat sink is recommended if the device is operated at ambient temperatures higher than 25°C.
D-CT133.000
Data Sheet: CL
Typical Electrical & Optical Characteristics (TA = 25°C)
Characteristics
Symbol
Condition
Forward Voltage
VF
IF = 70 mA
V
Reverse Current
IR
VR = 5 V
μA
Dominant Wavelength
λD
IF = 70 mA
nm
584
591
ΦV
IF = 70 mA
mlm
2000
3200
2θ½
IF = 70 mA
deg
Luminous Flux
50% Power Angle
Unit
Minimum
Subject to change without notice.
www.cree.com/ledlamps
Typical
2.6
Maximum
3.2
100
599
70
Standard Bins for LP377TYL1-70G-01 (IF = 70 mA)
Lamps are sorted to luminous flux (ΦV), VF and dominant wavelength (λD) bins shown.
Orders for LP377TYL1-70G-01 may be filled with any or all bins contained as below.
All luminous flux (ΦV), VF and dominant wavelength (λD) values shown and specified are at IF = 70 mA.
X2
X3
X4
X5
X6
L or
above
K
J
H
G
584 nm
587 nm
590 nm
596 nm
593 nm
599 nm
Dominant Wavelength (λD)
Rank
Luminous Flux
G
H
J
K
2000-3000 mlm
2500-3600
3000-4200 mlm
3500-4800 mlm
Forward Voltage (VF)
Rank
Voltage
V4
V5
V6
V7
V8
2.2-2.4 V
2.4-2.6 V
2.6-2.8 V
2.8-3.0 V
3.0-3.2 V
Important Notes:
1. All ranks will be included per delivery; rank ratio will be based on the dice distribution.
2. No tolerance of measurement of luminous flux.
3. Tolerance of measurement of dominant wavelength is ±1 nm.
4. Tolerance of measurement of VF is ±0.05 V.
5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document.
6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT133.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Document No. SPE/LP377TYL1-70G-01
Rev. No.
02
Graphs
Graphs
-60
Vr(V)
If (mA)
100.0
-50
-40
-30
-20
-10
0.0
80.0
-10.0
60.0
-20.0
40.0
-30.0
20.0
-40.0
0.0
2.0
2.2 2.4
2.6 2.8 3.0
FIG.1 FORWARD CURRENT VS.
FORWARD VOLTAGE.
Vf(V)
Half Power
WL=20nm
Domi WL= 591nm
I (RELATIVE LUMINOUS FLUX)
100%
2.5
2.0
75%
1.5
50%
1.0
25%
0.5
If(mA)
0.0
0.0
20.0 40.0 60.0 80.0 100.0
FIG.3 RELATIVE LUMINOUS FLUX VS.
FORWARD CURRENT.
100
-50.0
Ir(uA)
FIG.2 REVERSE CURRENT VS.
REVERSE VOLTAGE.
WL(nm)
0%
400 500 600 700 800 900
FIG.4 RELATIVE LUMINOUS FLUX VS.
WAVELENGTH.
IF(mA)
50% Power Angle : 70
Ie(%)
80
0
100%
60
80%
40
60%
20
0
40%
Ta( C)
0
20
40
60
80
100
120
0%
FIG.5 MAXIMUM FORWARD DC CURRENT VS
AMBIENT TEMPERATURE (Tjmax=120 C)
Items
Signatures
Date
Prepared by
LiuZM
2005-05-18
Rev. No
Checked by
Aldosin
2005-05-18
02
Approved by
David
2005-05-18
FCN#
20%
-90
-60
-30
0
30
60
90
FIG.6 FAR FIELD PATTERN
Revision History
Date
Change Description
2005-05-18 Release. Change 2T½ from 75deg to 70deg.
FCN20050163
Data is subject to change without prior notice; please refer to COTCO Website for the latest version.
[email protected] Cotco International Ltd.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT133.000
4/4
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Format #: COTCO-D-074
REV.4
Mechanical Dimensions
Document No. SPE/LP377TYL1-70G-01
Rev. mm
No.unless otherwise
02 noted.
All dimensions are in mm. Tolerance is ±0.25
An epoxy meniscus may extend about 1.5 mm down the leads.
Dimension Drawing
Burr around bottom of epoxy may be 0.5 mm max.
maximum
ting
Unit
70
mA
00
mA
5
V
20
mW
+100
°C
+100
°C
°C forNotes
5 sec Max.
e base of the epoxy bulb)
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
the device
is operated
ambient
temperatures
higher
25 deg
C. For long
term
otherwise
restrictedat
materials
in this
product are below
thethan
maximum
concentration
values
(also referred to as the
threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc-
and 50mA
are recommended.
Please
contact
sales representative
for more
tive 2002/95/EC
on the restriction
of the
use of COTCO
certain hazardous
substances in electrical
and electronic equipment
(RoHS), as amended through April 21, 2006.
Vision Advisory Claim
= 25should
°C) be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
cs ( Ta Users
Condition
F
Min.
Typ.
Max.
Unit
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
are registered trademarks of Cree, Inc.
Cree logo
= 70mA
---
CLD-CT133.000
2.6
3.2
V
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage,
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED
Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following
manner:
Standard/Custom
0: Standard
C: Custom
VF
0: Full forward voltage distribution
1~9, A~Z . . . : special request *
Wd/Color
1: Full-color distribution
2~9, A~Z . . . : special request *
aaaaaaaaa-aaa-aa- x x x x x
IV
0: Full luminous intensity distribution
1~9, A~Z . . . : special request *
Packing type
0: Standard = tube pack
1~9, A~Z . . . : special request *
Product P/N
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number
Description
LP377TYL1-70G-01-00001
P4 70 Amber 591nm, FULL RANK, Tube Pack
LP377TYL1-70G-01-00011
P4 70 Amber 591nm, H or above, Tube Pack
* Please contact your Cree representative about the availability of non-standard kits.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT133.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps