CREE LP378PWN1-C0G

Cree® P4 LED
Model # LP378PWN1-C0G
Data Sheet
120-degree, 7.6 x 7.6 mm LED lamp in white color with water-transparent lens and stopper
Applications
•
•
Indicators
Illuminations
Absolute Maximum Ratings (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
IF
30
mA
IFP
100
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
132
mW
Operation Temperature
Topr
-40 ~ +95
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Lead Soldering Temperature
Tsol
Forward Current
Peak Forward Current
Note
Max. 260°C for 3 sec. max.
(3 mm from the base of the epoxy bulb)
Note: Pulse width <=0.1 msec, duty <=1/10.
Typical Electrical & Optical Characteristics (TA = 25°C)
Characteristics
Symbol
Condition
Unit
Forward Voltage
VF
IF = 30 mA
V
Reverse Current
IR
VR = 5 V
μA
Luminous Intensity
IV
IF = 30 mA
mcd
Luminous Flux
ΦV
IF = 30 mA
mlm
x
IF = 30 mA
0.31
y
IF = 30 mA
0.32
2θ½H-H
IF = 30 mA
Chromaticity
Coordinates
deg
Typical
Maximum
3.6
4.4
100
200
350
1900
130
D-CT126.000
Data Sheet: CL
50% Power Angle
Minimum
Subject to change without notice.
www.cree.com/ledlamps
Standard Bins for LP378PWN1-C0G (IF = 30 mA)
Lamps are sorted to luminous intensity (IV), VF and chromaticity coordinates (x,y) bins shown.
Orders for LP378PWN1-C0G may be filled with any or all bins contained as below.
All luminous intensity (IV), VF and chromaticity coordinates (x,y) values shown and specified are at IF = 30 mA.
Luminous Intensity (IV)
A1
A2
B1
B2
c
550 mcd
R or
above
390 mcd
Q
280 mcd
P
200 mcd
N
Chromaticity Coordinates (x,y)
Rank
Chromaticity x
Coordinates y
A1
A2
B1
0.245
0.264
0.280
0.264
0.264
0.283
0.296
0.280
0.283
0.307
0.313
0.296
0.229
0.267
0.248
0.220
0.267
0.305
0.276
0.248
0.305
0.337
0.297
0.276
Rank
B2
Chromaticity x
Coordinates y
c
0.307
0.330
0.330
0.313
0.330
0.361
0.356
0.330
0.337
0.360
0.318
0.297
0.360
0.385
0.351
0.318
V7
V8
V9
V10
V11
V12
V13
V14
2.8-3.0 V
3.0-3.2 V
3.2-3.4 V
3.4-3.6 V
3.6-3.8 V
3.8-4.0 V
4.0-4.2 V
4.2-4.4 V
Forward Voltage (VF)
Rank
Voltage
Important Notes:
1. All ranks will be included per delivery; rank ratio will be based on the dice distribution.
2. Pb content <1000 ppm.
3. Tolerance of measurement of luminous intensity is ±15%.
4. Tolerance of measurement of the chromaticity coordinates is ±0.01.
5. Tolerance of measurement of VF is ±0.05 V.
6. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document.
7. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
8. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT126.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
CIE Chromaticity Diagram
CIE
CIE Chromaticity Diagram
0.90
520
530
0.80
540
510
550
0.70
560
0.60
570
490
0.50
Y
580
590
0.40
600
c
610
620
630
B2
0.30
B1
480
A2
A1
0.20
470
0.10
460
0.00
0.00
0.10
0.20
0.30
X
4/5
0.40
0.50
0.60
0.70
Format #: COTCO-D-074 REV.4
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT126.000
0.80
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Document No. SPE/LP378PWN1-C0G
Rev. No.
04
Graphs
Graphs
Items
Signatures
Date
Prepared by
LiuZM
2007-04-26
Rev. No
Checked by
HuangJD
2007-04-26
02
2005-08-31 Change 2T½H-H from 120deg to 130deg.
Approved by
David
2007-04-26
03
2005-10-18 Release.
04
2007-04-26 Change tolerance of CIE(x,y) from +/-0.015 to +/-0.01
FCN#
FCN20070432
Revision History
Date
Change Description
Data is subject to change without prior notice; please refer to COTCO Website for the latest version.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
[email protected] Cotco International Ltd.
Cree logo are registered trademarks of Cree, Inc.
CLD-CT126.000
5/5
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Format #: COTCO-D-074 REV.4
Mechanical Dimensions
Document No. SPE/LP378PWN1-C0G
Rev. No.
04
All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted.
An epoxy meniscus may extend about 1.5 mm down the leads.
Burr around bottom of epoxy
mm
Dimmay
ensbeio0.5
nD
ramax.
wing
e maximum
Unit
ating
30
mA
100
mA
5
V
132
mW
~ +95
°C
~ +100
°C
0°C forNotes
3 sec Max.
he base of the epoxy bulb)
RoHS Compliance
cs (
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc= 2002/95/EC
25 ) on the restriction of the use of certain hazardous substances in electrical and electronic equipment
Tative
(RoHS), as amended through April 21, 2006.
°C
Vision Advisory Claim
Users should be cautioned
at the light of this LED
product. The brightUnit
light can damage the eye.
Condition
Min. not to stare Typ.
Max.
IF = 30mA
---
3.6
4.4
V
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
VR = 5V
---
CLD-CT126.000
---
100
PA
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage,
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED
Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following
manner:
Standard/Custom
0: Standard
C: Custom
VF
0: Full forward voltage distribution
1~9, A~Z . . . : special request *
Wd/Color
1: Full-color distribution
2~9, A~Z . . . : special request *
aaaaaaaaa-aaa-aa- x x x x x
IV
0: Full luminous intensity distribution
1~9, A~Z . . . : special request *
Packing type
0: Standard = tube pack
1~9, A~Z . . . : special request *
Product P/N
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number
Description
LP378PWN1-C0G-00001
P4 120 White, FULL RANK, Tube Pack
LP378PWN1-C0G-00002
P4 120 White, A1, A2, B1, B2, Tube Pack
* Please contact your Cree representative about the availability of non-standard kits.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT126.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps