CREE LP379PPG1-C0G-03

Cree® P4 LED
Model # LP379PPG1-C0G-03
Data Sheet
120-degree, 7.6 x 7.6 LED lamp in pure-green color with water-transparent lens and stopper
Applications
•
•
•
Advertising Signs
Indicators
Message Boards
Absolute Maximum Ratings (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
IF
30
mA
IFP
100
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
132
mW
Operation Temperature
Topr
-40 ~ +100
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Lead Soldering Temperature
Tsol
Forward Current
Peak Forward Current
Note
Max. 260°C for 3 sec. max.
(3 mm from the base of the epoxy bulb)
Note: Pulse width ≤0.1 msec, duty ≤1/10.
Typical Electrical & Optical Characteristics (TA = 25°C)
Characteristics
Symbol
Condition
Unit
Forward Voltage
VF
IF = 30 mA
V
Reverse Current
IR
VR = 5 V
μA
Dominant Wavelength
λD
IF = 30 mA
nm
515
527
Luminous Flux
ΦV
IF = 30 mA
mlm
1000
2000
2θ½
IF = 30 mA
deg
Typical
Maximum
3.6
4.4
100
535
120
D-CT119.000
Data Sheet: CL
50% Power Angle
Minimum
Subject to change without notice.
www.cree.com/ledlamps
Standard Bins for LP379PPG1-C0G-03 (IF = 30 mA)
Lamps are sorted to luminous flux (ΦV ), VF and dominant wavelength (λD) bins shown.
Orders for LP379PPG1-C0G-03 may be filled with any or all bins contained as below.
All luminous flux (ΦV ), VF and dominant wavelength (λD) values shown and specified are at IF = 30 mA.
X6
X7
X8
X9
Luminous Flux (ΦV)
H or
above
G
F
E
525 nm
520 nm
515 nm
530 nm
535 nm
Dominant Wavelength (λD)
Rank
Luminous
Flux
Rank
Voltage
E
F
G
1000-1800 mlm
1500-2400 mlm
2000-3000 mlm
V7
V8
V9
V10
V11
V12
V13
V14
2.8-3.0 V
3.0-3.2 V
3.2-3.4 V
3.4-3.6 V
3.6-3.8 V
3.8-4.0 V
4.0-4.2 V
4.2-4.4 V
Important Notes:
1. All ranks will be included per delivery; rank ratio will be based on the dice distribution.
2. No tolerance in the measurement of luminous flux.
3. Tolerance of measurement of dominant wavelength is ±1 nm.
4. Tolerance of measurement of VF is ±0.05 V.
5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document.
6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT119.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Document No. SPE/LP379PPG1-C0G-03
Rev. No.
03
Graphs
Graphs
-50
If (mA)
100.0
-30
-40
-10
-20
0
0.0
Vr(V)
80.0
-10.0
60.0
-20.0
40.0
-30.0
-40.0
20.0
0.0
3.0
Vf(V)
3.4
3.8
4.2
-50.0
Ir(uA)
5.0
4.6
FIG.1 FORWARD CURRENT VS.
FIG.2 REVERSE CURRENT VS.
FORWARD VOLTAGE.
REVERSE VOLTAGE.
Half Power
WL=38nm
Domi WL= 527nm
2.5
100%
2.0
75%
1.5
1.0
50%
0.5
25%
0.0
0.0
If(mA)
20.0 40.0 60.0
0%
300
80.0 100.0
FIG.3 RELATIVE LUMINOUS FLUX VS.
IF(mA)
50% Power Angle : 120
Ie(%)
0
100%
30
80%
20
60%
10
40%
0
Ta( C)
0
20
40
60
80
100
120
20%
-90
FIG.5 MAXIMUM FORWARD DC CURRENT VS
AMBIENT TEMPERATURE (Tjmax=120 C)
Signatures
Date
Prepared by
LiuZM
2005-07-07
Rev. No
Checked by
Aldosin
2005-07-07
03
Approved by
David
2005-07-07
FCN#
WL(nm)
700
600
WAVELENGTH.
40
Items
500
FIG.4 RELATIVE LUMINOUS FLUX VS.
FORWARD CURRENT
50
400
-60
-30
0
30
60
90
0%
FIG.6 FAR FIELD PATTERN
Revision History
Date
Change Description
2005-07-07 Release.
FCN20050221
Data is subject to change without prior notice; please refer to COTCO Website for the latest version.
[email protected] Cotco International Ltd.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT119.000
4/4
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Format #: COTCO-D-074
REV.4
Mechanical Dimensions
Document No. SPE/LP379PPG1-C0G-03
Rev. No.
03
All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted.
An epoxy meniscus may extend about 1.5 mm down the leads.
Burr around bottom of epoxy
mm
Dimmay
ensbeio0.5
nD
ramax.
wing
e maximum
Unit
ating
30
mA
100
mA
5
V
132
mW
~ +100
°C
~ +100
°C
0°C forNotes
3 sec Max.
he base of the epoxy bulb)
RoHS Compliance
cs (
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc= 2002/95/EC
25 ) on the restriction of the use of certain hazardous substances in electrical and electronic equipment
Tative
(RoHS), as amended through April 21, 2006.
°C
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Condition
Min.
Typ.
Max.
Unit
IF = 30mA
---
3.6
4.4
V
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
VR = 5V
CLD-CT119.000
---
---
100
PA
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage,
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED
Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following
manner:
Standard/Custom
0: Standard
C: Custom
VF
0: Full forward voltage distribution
1~9, A~Z . . . : special request *
Wd/Color
1: Full-color distribution
2~9, A~Z . . . : special request *
aaaaaaaaa-aaa-aa- x x x x x
IV
0: Full luminous intensity distribution
1~9, A~Z . . . : special request *
Packing type
0: Standard = tube pack
1~9, A~Z . . . : special request *
Product P/N
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number
LP379PPG1-C0G-03-00001
Description
P4 120 Pure Green 527nm, FULL RANK, Tube Pack
* Please contact your Cree representative about the availability of non-standard kits.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT119.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps