Cree® SMD LED Model # LP6-PPP2-01-N1 Data Sheet 120-degree, 6.0 x 5.0-mm, SMT LED in full color with white diffused lens Applications • • • • Indoor and Outdoor Displays Backlighting Camera Flash RGB Full-Color Displays Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit R G B IF 80 80 80 mA IFP 200 100 100 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 200 410 410 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 110 110 °C RTHJA 250 210 210 °C/W RTHJA 500 300 300 °C/W Junction/solder point 1 chip on RTHJS 150 130 130 °C/W Junction/solder point 3 chips on RTHJS 150 160 160 °C/W Forward Current Note 1 Peak Forward Current Note 2 Junction/ambient 1 chip on Note 3 Junction/ambient 3 chips on Note 3 Notes: 1. 2. 3. Single-color light. Pulse width ≤0.1 msec, duty ≤1/10. RTH test condition: mounted on PC Board FR 4 (pad size ≥40 mm2) D-CT181.000 Data Sheet: CL Typical Electrical & Optical Characteristics (TA = 25°C) Values Characteristics Condition Symbol Wavelength at peak emission IF = 50 mA Dominant Wavelength IF = 50 mA Spectral bandwidth at 50% IREL max IF = 50 mA Δλ 24 38 28 nm Viewing Angle at 50% IV IF = 50 mA 2θ½ 120 120 120 deg Forward Voltage IF = 50 mA V Luminous Intensity Reverse Current (max) IF = 50 mA VR = 5 V Unit R G B λPEAK 620 521 468 nm λDOM 610~625 514~534 460~480 nm VF(avg) 2.0 4.0 4.0 VF(max) 2.5 5.1 5.1 V IV(min) 450 710 280 mcd IV(avg) 710 1000 450 mcd IR 10 10 10 μA Subject to change without notice. www.cree.com/ledlamps Standard Bins for LP6-PPP2-01-N1 (IF = 50 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown. Orders for LP6-PPP2-01-N1 may be filled with any or all bins contained as below. Luminous Intensity (IV) All luminous intensity (IV) and dominant wavelength (λD) values shown and specified are at IF = 50 mA. Luminous Intensity (IV) Luminous Intensity (IV) 1800 mcd W 1120 mcd V 710 mcd U 450 mcd 610 nm X or above Dominant Wavelength (λD) 625 nm X or above 1800 mcd W 1120 mcd V 710 mcd 514 nm Dominant Wavelength (λD) 534 nm V or above 710 mcd U 450 mcd T 280 mcd 460 nm Dominant Wavelength (λD) 480 nm Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of the dominant wavelength is ±1 nm. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT181.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. SPE/LP6-PPP2-01-N1 Rev. No. 02 Graphs Graphs 100.0 If (mA) 80.0 100.0 If (mA) 80.0 GREEN 60.0 60.0 BLUE 40.0 40.0 RED 20.0 20.0 0.0 3.0 Vf(V) 3.4 3.8 4.2 4.6 5.0 0.0 Vf(V) 1.6 1.8 2.0 2.2 4/6 Format #: COTCO-D-074 Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT181.000 2.6 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. FORWARD CURRENT VS. FORWARD VOLTAGE. 2.4 REV.4 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. SPE/LP6-PPP2-01-N1 Rev. No. 02 Graphs Graphs 5/6 Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT181.000 Cree, Inc. REV.4 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Format #: COTCO-D-074 Document No. SPE/LP6-PPP2-01-N1 Rev. No. 02 Graphs CIE Graph the color coordinates of the mixed light can be expected within the area of the color triangle marked a). The color coordinates of the mixed light can be expected within the area of the color triangle marked “a)”. the achromatic (x=0.33,y=0.33) is marked“+” The achromatic point point (x=0.33, y=0.33) is marked “+”. Items Signatures Date Prepared by WangFJ 2007-04-05 Rev.No Checked by XieJH 2007-04-05 02 Approved by DavidLiu 2007-04-05 FCN# Revision History Date Change Description 2007-04-05 Release FCN20070101 Data is subject to change without prior notice; Please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT181.000 6/6 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Format #: COTCO-D-074 REV.4 Document No. SPE/LP6-PPP2-01-N1 Rev. No. 02 Dimension Draw ing Mechanical Dimensions r displays All dimensions are in mm. lays atings at Ta = 25°C Symbol Absolute maximum Rating Unit R G B IF 80 80 80 mA IFP 200 100 100 mA VR 5 5 5 V PD 200 410 410 mW Topr -40 ~ + 100 °C Tstg -40 ~ + 100 °C Tj 110 110 110 °C on* 3 Rth JA 250 210 210 °C/W on* 3 Rth JA 500 300 300 °C/W s on Rth JS 150 130 130 °C/W s on Rth JS 150 160 160 °C/W 3 width<=0.1msec duty<=1/10* Rth test condition: Mounted on PC Board FR 4(pad size>=40mm2) ptical Characteristics(Ta = 25°C) Condition sion Values Symbol Unit R G B IF=50mA Opeak 620 521 468 nm IF=50mA Odom 610-625 514-534 460~480 nm 'O 24 38 28 nm Notes % Irel max IF=50mA RoHS Compliance IF=50mA 2 T½ 120 120 120 Deg. The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the VF(avg) for such 2.0substances,4.0 threshold limits) permitted or are used in4.0 an exemptedVapplication, in accordance with EU DirecI =50mA F tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment 5.1 5.1 V VF(max) (RoHS), as amended through April2.5 21, 2006. Iv(Min) 450 710 280 mcd Vision Advisory Claim IF=50mA 710 1000 450 mcd Iv(Avg) Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. VR=5V IR 10 10 10 PA Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT181.000 2/6 Format #: COTCO-D-074 REV.4 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * aaaaaaaaa-aaa-aa- x x x x x IV 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type 0: Standard = tape pack 1~9, A~Z . . . : special request * Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LP6-PPP2-01-N1-00001 Description 120 Full Color, FULL RANK, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT181.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps