CREE SPE/LC503PBG1-30Q-A3

COTCO LUMINANT DEVICE (HUIZHOU) LTD.
SPECIFICATION FOR COTCO LED LAMP
Document No:
Model No :
Rev. No:
Date:
SPE/LC503PBG1-30Q-A3
LC503PBG1-30Q-A3
03
2006-03-31
Description:
30 Degree 5mm LED Lamp in Bluish Green
Color with Water Transparent Lens and No
Stopper
Dice Material:
InGaN
Confirmed
by Customer:
Date:
ATTENTION
OBSERVE PRECAUTIONS
ELECTROSTATIC
SENSITIVE DEVICES
Document No. SPE/LC503PBG1-30Q-A3
Rev. No.
03
Applications:
-
Dimension Drawing
Advertising Signs
Indicators
Traffic
Absolute Maximum Ratings at Ta = 25°C
Items
Absolute maximum
Symbol
Unit
Rating
Forward Current
IF
25
mA
Peak Forward Current*
IFP
100
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
100
mW
Operation Temperature
Topr
-40 ~ +95
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Lead Soldering
Temperature
Max.260°C for 3 sec Max.
Tsol
(3mm from the base of the epoxy bulb)
*pulse width <=0.1msec duty <=1/10
Typical Electrical & Optical Characteristics ( Ta = 25°C)
Items
Symbol
Condition
Min.
Typ.
Max.
Unit
Forward Voltage
VF
IF = 20mA
---
3.4
4.0
V
Reverse Current
IR
VR = 5V
---
---
100
µA
Dominant Wavelength
λD
IF = 20mA
500
505
510
nm
Luminous Intensity
IV
IF = 20mA
3000
4800
---
mcd
50% Power Angle
2θ½H-H
IF = 20mA
---
30
---
deg
2/4
Format #: COTCO-D-074
REV.4
Document No. SPE/LC503PBG1-30Q-A3
Rev. No.
03
Standard bins for LC503PBG1-30Q-A3 (IF = 20mA):
Lamps are sorted to Luminous Intensity –IV & Dominant Wavelength –λD bins shown.
Orders for LC503PBG1-30Q-A3 may be filled with any or all bins contained as below.
All Luminous Intensity –IV & Dominant Wavelength –λD values shown and specified are at IF =20mA.
* W+
X3
X4
Luminous Intensity (IV)
8200mcd
Y
5860mcd
X
4180mcd
W
3000mcd
500nm
505nm
510nm
Dominant Wavelength (λD)
* W+ indicates Luminous Intensity is at W bin or above.
Important Notes:
1) All ranks will be included per delivery, rank ratio will be based on the Dices distribution.
2) Pb content <1000PPM.
3) Tolerance of measurement of luminous intensity is ±15%.
4) Tolerance of measurement of dominant wavelength is ±1nm.
5) Tolerance of measurement of Vf is ±0.05 V.
6) Packaging methods are available for selection, Please refer to PACKAGING STANDARD.
7) Please refer to LED LAMP RELIABILITY TEST STANDARD for reliability test conditions.
8) Please refer to APPLICATION NOTES for Application.
3/4
Format #: COTCO-D-074
REV.4
Document No. SPE/LC503PBG1-30Q-A3
Rev. No.
03
Graphs
If (mA)
-50
100.0
-40
-30
-20
0
-10
0.0
Vr(V)
80.0
-10.0
60.0
-20.0
40.0
-30.0
-40.0
20.0
Vf(V)
0.0
3.0
3.4
3.8
4.2
4.6
Ir(uA)
5.0
-50.0
FIG.2 REVERSE CURRENT VS.
REVERSE VOLTAGE.
FIG.1 FORWARD CURRENT VS.
FORWARD VOLTAGE.
Half Power WL=38nm
Domi WL= 505nm
5.0
4.0
100%
3.0
75%
2.0
50%
1.0
25%
If(mA)
0.0
0.0
20.0 40.0 60.0
80.0 100.0
FIG.3 RELATIVE LUMINOUS INTENSITY VS.
FORWARD CURRENT
0%
300
400
500
600
WL(nm)
700
FIG.4 RELATIVE LUMINOUS INTENSITY VS.
WAVELENGTH.
IF(mA)
50% Power Angle : 30
50
40
Ie(%)
0
100%
30
80%
20
60%
10
40%
Ta( C)
0
0.0
20.0 40.0 60.0
0%
FIG.5 MAXIMUM FORWARD DC CURRENT VS
AMBIENT TEMPERATURE (Tjmax=105 C)
Items
20%
80.0 100.0
-90
-60
0
30
60
90
FIG.6 FAR FIELD PATTERN
Signatures
Date
Prepared by
LiuZM
2006-03-31
Rev. No
Checked by
Aldosin
2006-03-31
02
2005-07-05 Release.
Approved by
David
2006-03-31
03
2006-03-31 Cancel VF bin.
FCN#
-30
Revision History
Date
Change Description
FCN20060081
Data is subject to change without prior notice; please refer to COTCO Website for the latest version.
Copyright@2002 Cotco International Ltd.
4/4
Format #: COTCO-D-074
REV.4