Temperature Compensated Crystal Oscillator CXOSD5 Model 4 Pad SMD, 3.3V & 5V, Clipped Sine 10MHz to 30MHz ±2ppm to ±5ppm ±0.5ppm Max ±0.3ppm Max -40°C to 85°C -55°C to 120°C 3.3V or 5V ± 5% ±3ppm Min. 1.5mA Typ, 3mA Max Clipped Sinewave 5V = 1.0Vpp Min 3.3V = 0.7Vpp Min 20K Ohm / 5pF Max Frequency Range: Frequency Stability: Freq. Stability vs Volt: Freq. Stability vs Load: Temperature Range: Storage: Input Voltage: Trimmer Adj. Range: Input Current: Output: Output Voltage: Load: Phase Noise Typ.: ee Fr ad Le oHS ant R pli m Co Designed to meet today's requirements for tighter frequency stability tolerance while reducing pad layout requirement. -100dBc/Hz -130dBc/Hz -140dBc/Hz -145dBc/Hz -150dBc/Hz <1ppm Max/Yr 10Hz 100Hz 1KHz 10KHz 100KHz Aging: CXOSD5 0.300 (7.62) 0.449 ±0.012 (11.4 ±0.3) 0.354 ±0.012 (9.6 ±0.3) CRYSTEK 10M DC #1 #2 0.283 (7.2) #4 #3 0.031 (0.8) pin 4 pin 3 Vdd pin 1 A C D E F G H O/P Load incl Probe Cl OUT OSC. VM B 0.047 ±0.004 (1.2 ±0.1) PIN Connection 1 2 3 4 NC GND OUTPUT Vdd Dimensions inches (mm) All dimensions are Max unless otherwise specified. OUT mA M PWR Supply 0.110 (2.8) Operating Temperature 0°C to 50°C -10°C to 60°C -10°C to 70°C -20°C to 70°C -30°C to 60°C -30°C to 70°C -30°C to 75°C -40°C to 85°C GND NC CXOSD5 - B C 3 - 25.000 pins 2 #1 #2 #3 #4 #5 #1 Crystek TCXO 4 Pad SMD Clipped Sine #2 Letter = Operating Temperature (see table 1) #3 Letter = Frequency Stability (see table 1) #4 3 or blank = Input Volt (3 = 3.3 volts) (Blank= 5V) #5 Frequency in MHz: 3 or 6 decimal places Freq. Stability (± ppm) 1.5 2.0 2.5 3.0 4.0 5.0 1.5 2.0 2.5 3.0 4.0 5.0 2.0 2.5 3.0 4.0 5.0 2.0 2.5 3.0 4.0 5.0 2.0 2.5 3.0 4.0 5.0 2.0 2.5 3.0 4.0 5.0 2.0 2.5 3.0 4.0 5.0 4.0 5.0 B C D E F A Crystek Part Number Guide Example: CXOSD5-BC3-25.000 = -10/60, ±2.5ppm, 3.3V, 25.000MHz Table 1 Specifications subject to change without notice. TD-020817 Rev. E