CUI VDRT-960-24

VDRT-960-24 Three Phase Industrial DIN Rail Power Supply
·High efficiency 89% and low dissipation
·Protections:Short circuit/Over load/Over voltage/Over
·Cooling by free air convection
·Built-in constant current limiting circuit
·Can be installed on DIN rail TS-35/7.5 or 15
·UL 508(industrial control equipment)approved
·EN61000-6-2(EN50082-2) industrial immunity level
·100% full load burn-in test
·3 year warranty
DC output voltage
Output rated current
Output current range
Rated output power
Ripple & noise
Voltage adj. range
Voltage tolerance
Line regulation
Load regulation
Setup, rise, hold time
Input voltage range
Frequency range
AC current
Inrush current
Leakage current
Overload protection
Over voltage protection
Over temp. protection
Working temperature
Working humidity
Storage temp., humidity
Temperature coefficient
Safety standards
Withstand voltage
Isolation resistance
EMI conduction & radiation
Harmonic current
EMS immunity
200ms, 60ms, 10ms/400VAC
200ms, 60ms, 24ms/500VAC at full load
Three phrase 340 ~ 550VAC
47 ~ 63Hz
Cold start 50A
<3.5mA / 530VAC
105 ~ 125% rated output power
type : Constant current limiting, unit will shut down o/p
voltage after 3 sec., re-power on to recover
30~36V type : Shut down o/p voltage, re-power on to recover
110°C±5°C(TSW1) Detect on heatsink of power transistor, 85°C±5°C(TSW2) Detect on
heatsink of power diode
type : Shut down o/p voltage, recovers automatically after temperature goes down
-20 ~ +60°C (Refer to output load derating curve)
20 ~ 90% RH non-condensing
-40 ~ +85°C , 10 ~ 95% RH
±0.03%/°C (0 ~ 50°C)
Component: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting:
compliance to ICE60068-2-6
UL508, ULEN60950-1, TUV EN60950-1 Approved
O/P-FG:0.5KVAC for 1 min.
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC min.
Compliance to EN55022 (CISPR22) Class B
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61000-6-2 (EN50082-2) Heavy
industry level, criteria A
122.5Khrs min.
MIL-HDBK-217F (25°C)
10.87x4.93x3.94 inches (276*125.2*100mm)
7.28lbs (3.3Kg); 4pcs/ 31.3lbs (14.2Kg)/1.14CUFT
1. All parameters are specified at 230VAC input, rated load, 25°C 70% RH ambient
2. Tolerance includes set up tolerance, line regulation, load regulation
3. Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a 0.1uF & 47 uF capacitor
*V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise customers to verify the most
up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for customer’s applications using V-Infinity products other than
repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s published specifications. Nothing will be covered outside of standard product warranty.
V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005
VDRT-960-24 Three Phase Industrial DIN Rail Power Supply
Dimensions (mm)
Output Derating
Static Characteristics
V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005