VQ-120 Series AC/DC Metal Enclosed A CUI INC COMPANY 8 " x 4 " x 2 . 0 " , 8 8 ~ 1 3 2 VA C , 1 2 0 W, Q U A D R U P L E O U T P U T .LOW COST, HIGH RELIABILITY .COMPACT SIZE, LIGHT WEIGHT .105ºC OUTPUT CAPACITOR .100% FULL LOAD BURN-IN TEST .INTERNATIONAL AC INPUT RANGE .BUILT IN EMI FILTER, LOW RIPPLE NOISE .HIGH EFFICIENCY, LOW WORKING TEMPERATURE .SOFT-START CIRCUIT, LIMITING AC SURGE CURRENT .SHORT CIRCUIT, OVERLOAD, OVER VOLTAGE PROTECTED VQ-120B MODEL SPECIFICATION DC OUTPUT VOLTAGE OUTPUT V. TOLERANCE VQ-120C VQ-120D CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4 5V 12V -5V -12V 5V 15V -5V -15V 5V 12V 24V -12V ±2% ±6% ±6% ±6% ±2% +10,5% ±6% +10,5% ±2% ±6% ±6% ±6% 4A 1A 1A 3.5A 1A 1A OUTPUT RATED CURRENT 11A OUTPUT CURRENT RANGE 2-12A RIPPLE & NOISE 80mV 120mV 80mV 120mV 80mV 150mV 80mV 150mV 80mV 120mV 180mV 120mV (p-p) 0.5-5A 0.2-1A 0.2-1A 10A 2-12A 0.5-5A 0.2-1A 0.2-1A 8A 2A 2A 1A 2-12A 0.2-5A 0.2-2A 0.2-1A LINE REGULATION ±0.5% ±1% ±1% ±1% ±0.5% ±1% ±1% ±1% ±0.5% ±1% ±1% ±1% LOAD REGULATION ±0.5% ±5% ±5% ±5% ±0.5% ±6% ±5% ±6% ±0.5% ±5% ±5% ±5% DC OUTPUT POWER 120W 122.5W 124W EFFICIENCY 77% 76% 80% CH1:+10,-5% CH1:+10,-5% CH1:+10,-5% DC VOLTAGE ADJ. INPUT VOLTAGE RANGE 88~132VAC / 176~264VAC SELECTED BY SWITCH 47~63Hz; 240~370VDC AC CURRENT 2.5A/115V 1.25A/230V INRUSH CURRENT COLD START 35A LEAKAGE CURRENT <3.5mA/240VAC OVERLOAD PROTECTION 105%~135% TYPE:OUTPUT SHUTDOWN RESET:RECYCLE AC ON / OFF OVER VOLTAGE PROTECTION CH1:5.75~6.75V OVER TEMP. PROTECTION ---------- TEMP. COEFFICIENT ±0.03% / ºC (0~50ºC) SETUP, RISE, HOLD UP TIME 200ms, 50ms, 20ms VIBRATION 10~500Hz, 2G 10min./1cycle, PERIOD FOR 60min. EACH AXES WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms WORKING TEMP., HUMIDITY -10ºC~+60ºC(REFER TO OUTPUT DERATING CURVE), 20%~90% RH STORAGE TEMP., HUMIDITY -20ºC~+85ºC, 10%~95% RH DIMENSION 199*110*50mm CASE:906 WEIGHT 0.88Kgs SAFETY STANDARDS UL1950, TUV EN60950 APPROVED EMC STANDARDS CISPR22 (EN55022) CLASS B, IEC801-2,3,4, IEC555-2 VERIFICATION NOTE : 1.ALL PARAMETERS ARE SPECIFIED AT 230VAC INPUT, RATED LOAD, 25ºC 70% RH. AMBIENT. 2.TOLERANCE: INCLUDE SET UP TOLERANCE, LINE REGULATION, LOAD REGULATION. 3.RIPPLE & NOISE ARE MEASURED AT 20MHz BY USING A 12" TWISTED PAIR TERMINATED WITH A 0.1uF & 47uF CAPACITOR. 4.LINE REGULATION IS MEASURED FROM LOW LINE TO HIGH LINE AT RATED LOAD. 5.LOAD REGULATION IS MEASURED FROM 20% TO 100% RATED LOAD, AND OTHER OUTPUT AT 60% RATED LOAD. 6.EACH OUTPUT PROVIDE UP TO MAXIMUM CURRENT, BUT TOTAL LOAD CAN NOT EXCEED MAX. OUTPUT POWER. 7.C2,3,11 MUST BE REMOVED. V-INFINITY LLC, 9615 SW Allen Blvd., Suite 103, Beaverton, OR 97005 1-866-372-1258 JUN.11.98 www.v-in fi ni ty . com VQ-120 Series AC/DC Metal Enclosed A CUI INC COMPANY 8 " x 4 " x 2 . 0 " , 8 8 ~ 1 3 2 VA C , 1 2 0 W, Q U A D R U P L E O U T P U T V-INFINITY LLC, 9615 SW Allen Blvd., Suite 103, Beaverton, OR 97005 1-866-372-1258 www.v-infinity.com V Q - 1 2 0 S e r i e s AC / D C M e t a l E n cl o s e d A CUI INC COMPANY 8 " x 4 " x 2 . 0 " , 8 8 ~ 1 3 2 VA C , 1 2 0 W, Q UA D R U P L E O U T P U T Quality Engineering Test Report SERIES: VQ-120 SAMPLE: NO 1 2 120W AC-DC QUAD OUTPUT SWITCHING POWER SUPPLY A : VQ-120B V1: V2: V3: V4: TEST ITEM AC INPUT VOLTAGE RANGE 5V 12V -5V -12V / 11A B : VQ-120C / 4A / 1A / 1A I/P:TESTING O/P:FULL LOAD SPEC:176~264VAC I/P:176~264VAC O/P:FULL LOAD SPEC: LINE REGULATION LOAD REGULATION I/P:176~264VAC O/P:20% TO FULL LOAD 4 OUTPUT VOLTAGE TOLERANCE / 10A C : VQ-120D V1: / 3.5A V2: / 1A V3: / 1A V4: TEST CONDITION / SPECIFICATION I/P:230VAC SPEC: O/P:MIN. TO FULL LOAD 3 V1: 5V V2: 15V V3: -5V V4: -15V 5V 12V 24V -12V RESULT C:139VAC~267VAC / / / / 8A 2A 2A 1A VERDICT P A: V1: V2: V3: V4: B: V1: : V2: V3: V4: C: V1: V2: V3: V4: –0.5% –1% –1% –1% –0.5% –1% –1% –1% –0.5% –1% –1% –1% A: V1: V2: V3: V4: B: V1: V2: V3: V4: C: V1: V2: V3: V4: A: V1: V2: V3: V4: B: V1: V2: V3: V4: C: V1: V2: V3: V4: –0.5% –5% –5% –5% –0.5% –6% –5% –6% –0.5% –5% –5% –5% A: V1: V2: V3: V4: B: V1: V2: V3: V4: C: V1: V2: V3: V4: -0.12% ~ -0.62% ~ -1.32% ~ -1.62% ~ -0.24% ~ -0.75% ~ -0.72% ~ -1.41% ~ -0% ~ 0% ~ -0.099% ~ -0.71% ~ +0.12% +1.54% +1.69% +2.43% 0% +1.54% +1.47% +3.19% 0.118% +1.24% +1.48% +1.58% P A: V1: V2: V3: V4: B: V1: V2: V3: V4: C: V1: V2: V3: V4: –2% –6% –6% –6% –2% -5%~+10% –6% -5%~+10% –2% –6% –6% –6% A: V1: V2: V3: V4: B: V1: V2: V3: V4: C: V1: V2: V3: V4: -0.38% ~ -4.17% ~ -3.64% ~ -2.9% ~ -0.38% ~ -2.85% ~ -3.26% ~ -2.42% ~ -0.13% ~ -2.07% ~ -1.23% ~ -1.65% ~ +0.26% +5.31% +5.86% +5.83% +0.12% +4.9% +5% +4.67% +0.35% +3.21% +3.53% +4.19% P SPEC: V-INFINITY LLC, 9615 SW Allen Blvd., Suite 103, Beaverton, OR 97005 0% ~ -0.1% ~ -0.1% ~ -0.1% ~ -0.12% ~ -0.04% ~ -0.48% ~ -0.07% ~ 0% ~ -0.049% ~ -0.049% ~ -0.048% ~ +0.12% +0.2% +0.1% +0.25% 0% +0.19% +0.23% +0.23% 0.118% +0.098% +0.176% +0.097% P 1-866-372-1258 www.v-in fi ni ty . com V Q - 1 2 0 S e r i e s AC / D C M e t a l E n cl o s e d A CUI INC COMPANY NO TEST ITEM 8 " x 4 " x 2 . 0 " , 8 8 ~ 1 3 2 VA C , 1 2 0 W, Q UA D R U P L E O U T P U T TEST CONDITION / SPECIFICATION I/P:230VAC O/P:FULL LOAD SPEC: A: V1: V2: V3: V4: B: V1: V2: V3: V4: C: V1: V2: V3: V4: 80mV 120mV 80mV 120mV 80mV 150mV 80mV 150mV 80mV 120mV 180mV 120mV 5 RIPPLE&NOISE 6 AC INPUT CURRENT I/P:230VAC O/P:FULL LOAD SPEC:1.25A 7 MAX. INRUSH CURREN I/P:230VAC O/P: FULL LOAD SPEC:30A I/P:230VAC SPEC: -5%~+10% 8 O/P VOLTAGE ADJ.RANGE 9 SET UP TIME 10 HOLD UP TIME 11 O/P:MIN. LOAD I/P:230VAC I/P:230VAC O/P:FULL LOAD SPEC:20mS I/P:230VAC O/P:FULL LOAD SPEC: EFFICIENCY 12 OVER LOAD PROTECTION I/P:230VAC O/P:TESTING SPEC:105%~135% I/P:230VAC SPEC:5.75~6.75V 13 OVER VOLTAGE PROTECTION O/P:FULL LOAD 14 GROUND LEAKAGE CURRENT I/P:240VAC 15 INSULATION RESISTANCE SPEC: 16 17 DIELECTRIC / WITHSTAND VOLTAGE BURN-IN TEST A: V1: 45mV V2: 38mV V3: 22mV V4: 35mV B: V1: 34mV V2: 49mV V3: 25mV V4: 42mV C: V1: 25mV V2: 24mV V3: 50mV V4: 27mV VERDICT P C:1.233A P C:29.05A P A: 4.38V~5.82V B: 4.43V~5.75V C: 4.44V~5.79V P C: 13.6mS P C: 33.9mS P A:80% B:81% C:83.11% P A:125.8% B:122.4% C:120% P A : 6.21V B : 6.58V C : 6.2V P A: L-FG:1.01mA N-FG:1.07mA P C: O/P-FG I/P-O/P I/P-FG >100M Ohms >100M Ohms >100M Ohms P C: I/P-O/P I/P-FG O/P-FG :0.002mA :0.002mA :0.002mA P SPEC:200mS O/P:FULL LOAD SPEC: RESULT A:77% B:76% C:80% SPEC: L-FG--<3.5mA N-FG--<3.5mA I/P-O/P: 500VDC/100M Ohms MIN. I/P-FG: 500VDC/100M Ohms MIN. O/P-FG: 500VDC/100M Ohms MIN. I/P- O/P: I/P - FG: O/P - FG: 4.3KVDC/ 1 min. (10mA CUT-OFF) 2.2KVDC/ 1 min. (10mA CUT-OFF) 0.75KVDC/ 1 min. (10mA CUT-OFF) I/P: 230VAC O/P: FULL LOAD TA:24.7”C BURN-IN DURATION : 2 hrs V-INFINITY LLC, 9615 SW Allen Blvd., Suite 103, Beaverton, OR 97005 C:NON BREAK 1-866-372-1258 P www.v-in fi ni ty . com