F E AT U R E S MODEL NO. DP056 0 461 - 471 MHz 45° LSB, 315° Range Integrated Power Divider for REF Channel Integrated Amplifier for Equal Insertion Loss ECL Driver HDI INPUT A1 +5V -5.2V +15V 2.00 1.40 .200 TYP .30 TYP .400 .350 A3 +15 +5 -5.2 CONTRASTING COLOR BEAD A1 Phase Shifter, 3 Section GND GND GND GND OUTPUT A3 POWER DIVIDER PART IDENTIFICATION AMPLIFIER PHASE SHIFTER 3 SECTION A2 C2 B2 C1 C2 C1 B1 C2 B0 C1 GND 1.00 GND .018 DIA LEAD 16 PLACES C1 C2 B0 C1 C2 B1 C1 C2 B2 A2 OUTPUT .100 MAX MOUNTING SURFACE .180 MAX .xx = .02 .xxx = .010 GUARANTEED PERFORM A NCE Parameter Min Typ Max Units Operating Frequency DC Current 461 Control Type Control Current High Low Insertion Loss or A1 - A3 LOGIC TABLE Control Logic B2 B1 B0 0 0 0 0 0 1 0 1 0 0 1 1 1 0 0 1 0 1 1 1 0 1 1 1 Phase State PS0 PS1 PS2 PS3 PS4 PS5 PS6 PS7 Nominal Phase Shift (DEG) LOGIC “1” 0 C1 = -0.6V to -1.0V 45 C2 = -1.4V to -1.9V 90 135 LOGIC “0” 180 C1 = -1.4V to -1.9V 225 C2 = -0.6V to -1.0V 270 315 A1 - A2 7.65 -7.65 3.2 Balance Between A2 and A3 Isolation Phase Shift 20 LSB Range 466 75 60 90 ECL 471 100 150 150 MHz mA mA mA 8.5 -8.5 3.5 3.8 0.1 0.3 25 45 9.35 -9.35 4.1 4.5 0.75 1.0 mA mA dB dB dB dB dB DEG DEG 0 315 Accuracy VSWR 1.2/1 1.2/1 50 300 40 10 N/A +37 +20 +25 Input Output Impedance Switching Speed Transition (Rise/Fall) Time Switching (Video) Transients Intercept Points 2nd 3rd RF Power Operate No Damage Operating Temperature DA I C O In d u s t r i e s -54 +25 ±5 ±20 1.6/1 1.6/1 400 +18 +21 +23 +71 DEG DEG OHMS nSec nSec mV dBm dBm dBm dBm dBm °C Conditions At +15 VDC Supply At +5 VCD Supply At -5.2 VDC Supply 2 Line Differential See Logic Table C1 = -0.8V, C2 = -1.65V C1 = -1.65V, C2 = -0.8V At +25°C At Temperature Extremes At 25°C At Temperature Extremes Between Ports A2 - A3 or A3 - A2 45, 90, 180 DEG. J2 with Respect to J3 Minus PS0 for 180 Phase Change Any Phase State 50% ECL to 90% / 10% RF 90% / 10% or 10% / 90% RF Peak Value 440 MHz / 453 MHz Inputs 0.1 dB Compression 1.0 dB Compression TA Rev. N/D / Iss. 1