DOMINANT Semiconductors Surface Mount AlInGaP Spice LED : SSx-CLD Note: The center pad is a common cathode. Please take care during soldering to avoid shorting. • High brightness diffused surface mount LED. • Super wide viewing angle of 160°. • Equivalent to 0603 package outline. Copper lead-frame construction. • Qualified according to JEDEC moisture sensitivity Level 2. • Compatible to IR reflow soldering. 19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 1 of 1 DOMINANT Semiconductors Part Ordering Number Chip Technology / Viewing Color Angle SSS-CLD-N2P-1 AlInGaP / • • • Super Red SSS-CLD-N2 SSS-CLD-P1 SSS-CLD-P2 SSR-CLD-PQ1-1 • • • SSR-CLD-P1 SSR-CLD-P2 SSR-CLD-Q1 SSO-CLD-P2Q-1 • • • SSO-CLD-P2 SSO-CLD-Q1 SSO-CLD-Q2 AlInGaP / 160 35.5 … 71.5 35.5 … 45.0 45.0 … 56.0 56.0 … 71.5 160 45.0 … 90.0 45.0 … 56.0 56.0 … 71.5 71.5 … 90.0 Red AlInGaP / Luminous Intensity @ If = 20mA, Iv ( mcd ) 160 56.0 … 112.5 56.0 … 71.5 71.5 … 90.0 90.0 … 112.5 Orange SSO-CLD-QR1-1 71.5 … 140.0 • • 71.5 … 90.0 91.0 … 112.5 112.5 … 140.0 • SSO-CLD-Q1 SSO-CLD-Q2 SSO-CLD-R1 SSY-CLD-P2Q-1 • • • SSY-CLD-P2 SSY-CLD-Q1 SSY-CLD-Q2 SSG-CLD-M2N-1 • • • SSG-CLD-M2 SSG-CLD-N1 SSG-CLD-N2 SSP-CLD-KL1-1 • • • SSP-CLD-K1 SSP-CLD-K2 SSP-CLD-L1 AlInGaP / 160 56.0 … 71.5 71.5 … 90.0 90.0 … 112.5 Yellow AlInGaP / 160 22.4 … 45.0 22.4 … 28.5 28.5 … 35.5 35.5 … 45.0 Green AlInGaP / 56.0 … 112.5 160 Pure Green 7.2 … 14.0 7.2 … 9.0 9.0 … 11.2 11.2 … 14.0 NOTE: 1. All part number above comes in a standard quantity of 3000 units per reel. 2. Luminous intensity is measured with an accuracy of ±11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 2 of 2 DOMINANT Semiconductors Wavelength Grouping. Color Group Wavelength distribution (nm) SSS, Super Red Full 625 – 640 SSR; Red Full 620 – 630 SSO; Orange Full 600 – 612 W 600 – 603 X 603 – 606 Y 606 - 609 Z 609 - 612 Full 582 – 594 W 582 – 585 X 585 – 588 Y 588 - 591 Z 591 - 594 Full 564.5 – 576.5 W 564.5 – 567.5 X 567.5 – 570.5 Y 570.5 – 573.5 Z 573.5 – 576.5 Full 552.5 – 564.5 W 552.5 – 555.5 X 555.5 – 558.5 Y 558.5 – 561.5 Z 561.5 – 564.5 SSY; Yellow SSG; Green SSP; Pure Green Dominant wavelength is measured with an accuracy of ±1 nm. Electrical Characteristics at Ta=25°C. Vf @ If = 20 mA Minimum (V) 1.8 Typical (V) 2.0 Vr @ Ir = 10uA Maximum (V) Min.(V) 2.4 12 Vf is measured with an accuracy of ±0.1 V. 19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 3 of 3 DOMINANT Semiconductors Absolute Maximum Ratings Maximum Value Unit DC forward current. 30 mA Peak pulse current. 250 mA Reverse voltage. 12 V LED junction temperature. 110 °C Operating temperature. -40 … +100 °C Storage temperature. -40 … +100 °C (tp ≤ 10 µs, Duty cycle = 0.1) Power dissipation 80 mW ( at room temperature ) Material Material Lead-frame. Cu Alloy With NiPdAu Plating. Package. High Temperature Resistant Epoxy Resin. Note: Product is Pb free. 19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 4 of 4 DOMINANT Semiconductors Recommended Solder Pad Note: Component is based on a new package platform, which features “Bottom Only Terminations”. Solder joints are only formed at the bottom of the component and solder fillet will not be observable as the sides of the component are not solderable. Surfaces are not intended for soldering. 19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 5 of 5 DOMINANT Semiconductors Relative intensity vs. forward current. Forward current vs. forward voltage. Forward Current vs. Forward Voltage 2.2 35 2 30 1.8 Forward Current (mA) Relative intensity. Normalized at 20 mA. Intensity vs. DC Forward Current 1.6 1.4 1.2 1 0.8 0.6 25 20 15 10 0.4 5 0.2 0 1.2 0 0 10 20 30 40 50 60 1.4 Forward Current (mA) Radiation pattern. 30 o 20 o 1.6 1.8 2 2.2 Forward Voltage (V) Maximum current vs. ambient temperature. 0o 10 o 1.0 Max forward Current vs Temperature 35 Forward Current, If 40 0.8 o 0.6 50 o 0.4 60 o 70 o 80 o 90 o 30 25 20 15 10 5 0.2 0 10 20 30 40 50 60 70 80 90 100 0 Ambient Temperature Relative Intensity vs. Wavelength Relative Intensity Relative Spectra Emission 1.0 0.9 Yellow 0.8 Pure 0.7 Green 0.6 Green 0.5 0.4 0.3 0.2 0.1 0.0 500 Orange Red Super Red 600 700 800 Wavelength (nm) 19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 6 of 6 DOMINANT Semiconductors Taping And Orientation. Reels come in quantity of 3000 units. Reel diameter is 180 mm. 19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 7 of 7 DOMINANT Semiconductors Recommended Sn-Pb IR-Reflow Soldering Profile. Classification Reflow Profile (JEDEC J-STD-020C) 275 250 235-240oC 10-30s Ramp-up 3 oC/sec 200 183 oC o Temperature ( C) 225 175 60-150s 150 125 Ramp-dow n 6 oC/sec max. 100 Preheat 60-120s 75 50 360s max 25 0 50 100 150 200 Time (sec) Recommended Pb Free IR-Reflow Soldering Profile. Classification Reflow Profile (JEDEC J-STD-020C) 300 275 260-255oC 10-30s o Temperature ( C) 250 Ramp-up 3 oC/sec o 225 217 C 200 60-150s 175 150 125 Ramp-dow n 6 oC/sec max. 100 Preheat 60-180s 75 50 480s max 25 0 50 100 150 200 Time (sec) 19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 8 of 8 DOMINANT Semiconductors NOTE. All the information published is considered to be reliable. However, DOMINANT Semiconductors does not assume any liability arising out of the application or use of any product described herein. DOMINANT Semiconductors reserves the right to make changes at any time without notice to any products in order to improve reliability, function or design. DOMINANT Semiconductors products are not authorized for use as critical components in life support devices or systems without the express written approval from the managing director of DOMINANT Semiconductors. 19/05/05 S SpiceLED AlInGaP SSx-CLD-v3 Page 9 of 9