DR 300 DR1500 FAST RECOVERY HIGH VOLTAGE 25mA MINIATURE SILICON RECTIFIERS SMALL SIZE MOLDED PACKAGE PRV 3,000 TO 15,000 VOLTS AVALANCHE CHARACTERISTICS LOW LEAKAGE EDI Type PRV Volts COLOR CODE DOT DR300 DR500 DR800 DR1000 DR1200 DR1500 3,000 5,000 8,000 10,000 12,000 15,000 Orange Green Gray Red Blank White ELECTRICAL CHARACTERISTICS (at TA =25 o C Unless Otherwise Specified) o Average Rectified Forward Current @ 50 C, I O (Fig.1) 25 mA Max. Peak Surge Current, I FSM (8.3ms) (Fig.2) 3 Amp Max. Reverse Recovery, TRR (Fig.4) 100nanosec Max. Forward Voltage Drop @ 25 m A, V F 26Volts o Max. DC Reverse Current @ PRV and 25 C, I R 1 Max. DC Reverse Current @ PRV and 100 oC, I R 25 A A o o o o Ambient Operating Temperature Range, TA -55 C to +125 C Storage Temperature Range, TSTG -55 C to +150 C NOTES: 1.It is recommended that a proper heat sink be used on the terminals of this device between the body and soldering point to prevent damage from excess heat. 2.If operated over 10,000v/inch in length, devices should be immersed in oil or re - encapsulated. EDI reserves the right to change these specifications at any time without notice. DR 300 DR 1500 FIG.1 FIG.2 OUTPUT CURRENT vs AMBIENT TEMPERATURE NON- REPETITIVE SURGE CURRENT 0.1SEC 1.0SEC 100 % MAXIMUM SURGE % RATED FWD CURRENT 100 75 50 25 75 50 25 0 0 0 25 50 75 100 125 1 150 3 2 O AMBIENT TEMPERATURE ( C) 4 5 6 7 8 9 10 20 30 40 50 60 CYCLES(60 Hz) FIG.3 MECHANICAL DIMENSIONS A INCHES Leads-solid silver Polarity - Cathode dot See Color Code Chart Max. Min. A .095 .125 2.41 3.17 B .380 .420 9.65 10.66 C .300 - 7.60 - D .011 .016 0.27 0.40 D DIA. A B C MIN. MILLMETERS Min. Max. FIG.4 REVERSE RECOVERY TEST METHOD RECOVERY WAVE FORM RECOVERY WA VE FORM 1000 Trr NI + I F=2MA D.U.T. 0.1 50 NI I RR=1MA PULSE GENERATOR I R=5MA SCOPE WAVE FORMS CIRCUIT ELECTRONIC DEVICES, INC. DESIGNERS AND MANUFACTURERS OF SOLID STATE DEVICES SINCE 1951. 21 GRAY OAKS AVENUE * YONKERS. NEW YORK 10710 914-965-4400 * Ee-mail:[email protected] Wwebsite: http://www.edidiodes.com * FAX 914-965-5531 * 1-800-678-0828