PP 01-24 Toggle.qxd 5/6/02 4:32 PM Page 24 SERIES 2 0 0 B SWITCHES SEALED SMT SUB-MINIATURE SPECIFICATIONS Contact Rating: Electrical Life: Contact Resistance: Insulation Resistance: Dielectric Strength: Operating Temperature: Packaging: 0.4 VA max. @ 20 VAC or DC max. 50,000 make-and-break cycles at full load 20 mΩ max. initial @ 2-4 VDC 100 mA 109 ohm min. 1,000 V RMS @ sea level -30° C to 85° C Tape & Reel MATERIALS Case & Bushing: High temp material, glass filled 4/6 Nylon, flame retardant, heat stabilized (UL94-V0) Brass, chrome plated with internal O-ring seal standard Brass/Steel, tin or tin-lead plated Gold plate over nickel plated copper alloy Epoxy Actuator: Switch Support: Contacts / Terminals: Terminal Seal: HOW TO ORDER Model No. 200B Actuator Bushing Termination Contact Material Epoxy T2 A1 SM6 R=Gold E T2 A1 SM6 R E WMSP1 EXAMPLE WMSP1 200B P.C. MOUNTING 8.70 [.343] 2.03 [.080] TYP 3.56 [.140] TYP. 3.81 [.150] TYP. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. Series 1.02 [.040] 1.78 [.070] 1.02 [.040] TYP. 2.03 [.080] TYP. 3.25 [.128] TYP. 16.00mm Dia 1.50 mm 13.20 mm Dia. 330.0 mm 2.00mm 4.00mm 31.44 1.75mm 32.0 mm 6.30 mm 24 Schematic Dia. 20.20 mm Phone: 763-504-3525 Fax: 763-531-8235 37.50 www.e -switch.com [email protected]