FMM5820QH Ka-Band Power Amplifier MMIC FEATURES •High Output Power: P1dB = 36.0 dBm (Typ.) •High Linear Gain: GL = 23.0 dB(Typ.) •Frequency Band: 29.5 - 30.0 GHz •Impedance Matched Zin/Zout = 50Ω DESCRIPTION The FMM5820QH is a power amplifier MMIC that contains a fourstage amplifier, internally matched, for standard communications band in the 29.5 to 30.0GHz frequency range. This product is well suited for Ka-band V-SAT applications. Eudyna’s stringent Quality Assurance Program assures the highest reliability and consistent performance. ABSOLUTE MAXIMUM RATING(Case Temperature Tc=25℃ ℃) Item Symbol VDD DC Positive Supply Voltage VGG DC Negative Supply Voltage Pin Input Power Tstg Storage Temperature Rating 10 -3 +24 -55 to +125 Unit V V dBm ℃ RECOMMENDED OPERATING CONDITIONS Item Symbol VDD DC Positive Supply Voltage Pin Input Power T Operating Case Temperature C Recommend ≦7 ≦21 -40 to +85 Unit V dBm ℃ This product should be hermetically packaged. ELECTRICAL CHARACTERISTICS (Case Temperature Ta=25℃ ℃) Item RF Frequency Range Output Power at 1dB G.C.P. Power Gain at 1dB G.C.P. Power-added Efficiency at 1dB G.C.P. Drain Current at 1dB G.C.P. Input Return Loss (at Pin=-20dBm) Output Return Loss (at Pin=-20dBm) Symbol Test Conditions f P1dB G1dB Nadd IDDRF RLIN RLOUT VDD=+7V IDD=1500mA typ. ZS=ZL=50ohm Class 0 ESD Min. 29.5 34.5 18.0 - Limits Typ. Max. 30.0 36.0 22.0 26.0 25 2200 2800 -10 -15 - Unit GHz dBm dB % mA dB dB ~199V Note : Based on EIAJ ED-4701C-111A (C=100pF, R=1.5kΩ) Edition 1.1 January 2006 1 http://www.eudyna.com/ FMM5820QH Ka-Band Power Amplifier MMIC Output Power vs. Frequency VDD=7V, IDD(DC)=1500mA VDD=7V, IDD(DC)=1500mA 38 36 36 P1dB Output Power [dBm] Pin=12dBm 32 30 Pin=8dBm 28 26 22 27.5 28 28.5 29 29.5 30 30.5 31 32 28 2200 24 2000 22 1400 1200 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20 22 Input Power [dBm] IMD vs. Output Power Intermodulation Distortion [dBc] Power Added Eficiency [%] 20 Pin=16dBm Pin=12dBm 10 Pin=8dBm Pin=4dBm 29 29.5 30 VDD=7V, IDD(DC)=1500mA -15 P1dB 28.5 1600 16 31.5 25 28 1800 Drain Current 18 VDD=7V, IDD(DC)=1500mA 27.5 2400 26 30 0 2600 Pout Power Added Efficiency vs. Frequency 5 2800 30 Frequency [GHz] 15 3000 20 Pin=4dBm 24 3200 29.5GHz 29.75GHz 30.0GHz 29 5GH 34 Pin=16dBm 34 3400 30.5 31 29.5GHz 29.75GHz 30.0GHz 29 5GH -20 -25 -30 IM3 -35 -40 -45 -50 IM5 -55 -60 31.5 18 20 22 24 26 28 30 32 34 2-tone Total Output Power [dBm] Frequency [GHz] 2 36 Drain Current [mA] 38 Output Power [dBm] Output Power, Drain Current vs. Input Power FMM5820QH Ka-Band Power Amplifier MMIC Output Power, Drain Current vs. Input Power by Drain Voltage Output Power, Drain Current vs. Input Power by Drain Voltage IDD(DC)=1500mA, f=29.5GHz 36 3000 34 32 2800 30 2600 28 Pout 26 2400 2200 24 2000 22 1800 20 Drain Current 18 16 32 28 26 2000 22 1800 1600 20 1400 18 1200 16 Drain Current Input Power [dBm] IDD(DC)=1500mA 38 3200 30 2600 28 2400 2200 24 2000 22 1800 20 1600 Drain Current 16 36 P1dB [dBm] 2800 28 29.5GHz 29.75GHz 30.0GHz 29 GH 37 3000 Pout 1400 Output Power, Gain vs. Drain Voltage 3400 8V 7V 6V 5V 1600 1200 Input Power [dBm] Drain Current [mA] Output Power [dBm] 2200 24 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20 22 32 18 2400 Pout -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20 22 38 26 2800 2600 IDD(DC)=1500mA, f=30.0GHz 34 3000 30 Output Power, Drain Current vs. Input Power by Drain Voltage 36 3200 Drain Current [mA] 3200 3400 8V 7V 6V 5V 8V 27 26 P1dB 35 25 34 24 33 23 G1dB 32 22 1400 31 21 1200 30 20 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20 22 4 Input Power [dBm] 3 5 6 7 VDD [V] 8 9 G1dB [dB] Output Power [dBm] 34 8V 7V 6V 5V 38 Output Power [dBm] 36 IDD(DC)=1500mA, f=29.75GHz 3400 Drain Current [mA] 38 FMM5820QH Ka-Band Power Amplifier MMIC Output Power, Drain Current vs. Input Power by Drain Current Output Power, Drain Current vs. Input Power by Drain Current VDD=7V, f=29.5GHz 36 3000 34 32 2800 30 2600 Pout 28 2400 26 2200 24 2000 22 1800 20 2800 30 2600 Pout 28 2200 24 2000 22 1800 20 1400 18 16 1200 16 1400 1200 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20 22 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20 22 Input Power [dBm] Input Power [dBm] Output Power, Gain vs. Drain Voltage VDD=7V, f=30.0GHz 38 1700mA 1500mA 1300mA 3200 37 3000 30 2600 28 2400 Pout 2200 24 2000 22 1800 Drain Current 18 16 28 29.5GHz 29.75GHz 30.0GHz 36 P1dB [dBm] 2800 20 38 Drain Current [mA] Output Power [dBm] VDD=7V 3400 32 26 1600 Drain Current Output Power, Drain Current vs. Input Power by Drain Current 34 2400 26 1600 36 3000 32 18 Drain Current 3200 Drain Current [mA] 3200 3400 1700mA 1500mA 1300mA 27 26 P1dB 35 25 34 24 33 23 G1dB 32 22 1400 31 21 1200 30 20 1600 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20 22 1200 Input Power [dBm] 4 1300 1400 1500 1600 IDD(DC) [mA] 1700 1800 G1dB [dB] Output Power [dBm] 34 1700mA 1500mA 1300mA 38 Output Power [dBm] 36 VDD=7V, f=29.75GHz 3400 Drain Current [mA] 38 FMM5820QH Ka-Band Power Amplifier MMIC IMD vs. Output Power by Drain Voltage IMD vs. Output Power by Drain Voltage IDD(DC)=1500mA, f=29.5GHz IDD(DC)=1500mA, f=29.75GHz -15 8V 7V 6V 5V -20 -25 Intermodulation Distortion [dBc] Intermodulation Distortion [dBc] -15 -30 -35 IM3 -40 -45 -50 IM5 -55 -25 -30 -35 IM3 -40 -45 -50 IM5 -55 -60 -60 20 22 24 26 28 30 32 34 20 36 IMD vs. Output Power by Drain Voltage IDD(DC)=1500mA, f=30.0GHz -15 8V 7V 6V 5V -20 -25 -30 -35 IM3 -40 -45 -50 IM5 -55 -60 20 22 24 26 28 30 32 34 22 24 26 28 30 32 34 2-tone Total Output Power [dBm] 2-tone Total Output Power [dBm] Intermodulation Distortion [dBc] 8V 7V 6V 5V -20 36 2-tone Total Output Power [dBm] 5 36 FMM5820QH Ka-Band Power Amplifier MMIC IMD vs. Output Power by Drain Current IMD vs. Output Power by Drain Current VDD=7V, f=29.75GHz VDD=7V, f=29.5GHz -15 1700mA 1500mA 1300mA 1700 A -20 -25 Intermodulation Distortion [dBc] Intermodulation Distortion [dBc] -15 -30 -35 IM3 -40 -45 -50 IM5 -55 -60 -25 -30 -35 IM3 -40 -45 -50 IM5 -55 -60 20 22 24 26 28 30 32 34 36 20 2-tone Total Output Power [dBm] VDD=7V, f=30.0GHz -15 1700mA 1500mA 1300mA -20 -25 -30 -35 IM3 -40 -45 -50 IM5 -55 -60 20 22 24 26 28 30 32 34 22 24 26 28 30 32 34 2-tone Total Output Power [dBm] IMD vs. Output Power by Drain Current Intermodulation Distortion [dBc] 1700mA 1500mA 1300mA 1700 A -20 36 2-tone Total Output Power [dBm] 6 36 FMM5820QH Ka-Band Power Amplifier MMIC S-Parameter Sxx [dB] VDD=7V, IDD=1500mA 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 S21 S11 S22 0 5 10 15 20 25 30 35 40 Sxx [dB] Frequency [GHz] 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 S21 S11 S22 27 28 29 30 31 Frequency [GHz] 7 32 33 FMM5820QH Ka-Band Power Amplifier MMIC S-Parameter VDD=7V, IDD=1500mA Frequency S11 [GHz] MAG ANG 1.0 0.99 -34.5 2.0 0.94 -68.2 3.0 0.87 -100.3 4.0 0.78 -131.2 5.0 0.69 -160.0 6.0 0.61 172.4 7.0 0.54 144.9 8.0 0.46 117.0 9.0 0.39 88.7 10.0 0.33 59.1 11.0 0.28 27.4 12.0 0.25 -6.1 13.0 0.23 -40.0 14.0 0.22 -74.6 15.0 0.22 -105.9 16.0 0.22 -135.8 17.0 0.21 -165.4 18.0 0.21 165.3 19.0 0.20 134.4 20.0 0.19 103.8 21.0 0.19 70.3 22.0 0.20 35.9 23.0 0.23 2.6 24.0 0.27 -29.0 25.0 0.31 -57.9 26.0 0.35 -86.3 27.0 0.39 -114.9 28.0 0.38 -150.7 29.0 0.21 151.2 30.0 0.12 -123.6 31.0 0.17 -134.2 32.0 0.29 -140.8 33.0 0.35 -171.6 34.0 0.35 165.1 35.0 0.33 141.5 36.0 0.30 117.3 37.0 0.26 90.9 38.0 0.22 59.2 39.0 0.19 22.3 40.0 0.17 -20.3 S21 MAG ANG 0.00 -117.8 0.00 131.5 0.00 175.5 0.00 -165.2 0.00 -64.6 0.00 -53.0 0.00 -25.2 0.00 40.3 0.00 74.2 0.00 130.3 0.00 -160.3 0.01 -144.6 0.01 -134.8 0.01 -134.7 0.00 -25.0 0.00 50.1 0.00 116.1 0.01 107.9 0.01 130.9 0.01 155.0 0.00 127.9 0.00 -38.8 0.01 -25.1 0.01 -128.4 0.10 142.9 0.67 46.3 3.09 -88.2 10.15 113.8 15.32 -57.8 12.81 150.5 9.00 10.2 5.31 -115.2 3.17 126.8 1.72 14.8 0.85 -91.9 0.42 170.5 0.20 67.7 0.09 -39.6 0.04 -136.1 0.02 -156.4 8 S12 MAG ANG 0.00 -47.1 0.00 18.1 0.00 -159.3 0.00 149.3 0.00 2.0 0.00 -0.3 0.00 -42.0 0.00 60.1 0.00 -36.7 0.00 -100.5 0.00 -72.5 0.00 -118.7 0.00 -134.4 0.00 -171.8 0.00 162.1 0.00 -165.7 0.00 161.4 0.00 120.5 0.01 107.2 0.00 89.4 0.00 45.6 0.00 -6.7 0.00 -26.4 0.00 -83.2 0.00 36.5 0.00 -18.3 0.00 -84.9 0.00 -94.9 0.00 -164.1 0.00 172.3 0.00 158.0 0.00 80.9 0.00 -114.1 0.00 85.6 0.01 12.9 0.00 -27.8 0.00 -53.7 0.00 -77.5 0.01 -119.2 0.01 -114.8 S22 MAG ANG 0.99 -83.8 0.96 -141.7 0.96 177.1 0.97 143.8 0.97 114.5 0.96 86.8 0.94 60.4 0.91 35.9 0.89 13.5 0.89 -8.9 0.90 -32.0 0.91 -55.5 0.91 -78.9 0.91 -101.8 0.91 -125.1 0.91 -148.1 0.91 -170.9 0.91 165.1 0.91 139.5 0.89 112.9 0.86 85.3 0.84 55.8 0.81 23.9 0.78 -10.7 0.76 -50.2 0.65 -97.4 0.48 -133.9 0.42 -177.2 0.30 116.0 0.16 24.3 0.15 -73.3 0.19 -127.0 0.21 -175.2 0.19 122.8 0.19 29.5 0.35 -58.3 0.55 -119.6 0.69 -168.7 0.74 147.8 0.74 106.3 FMM5820QH Ka-Band Power Amplifier MMIC ∆Tch vs. Drain Voltage (Reference) IDD=1500mA 50 45 40 ℃) ∆ Tch (℃ 35 30 25 20 15 10 5 0 4 5 6 7 8 9 VDD (V) MTTF vs. Tch 1.E+12 1.E+11 1.E+10 Ea=1.56eV MTTF (hrs) 1.E+09 1.E+08 1.E+07 1.E+06 1.E+05 1.E+04 1.E+03 1.E+02 1.E+01 50 100 150 Tch (℃ ℃) 9 200 250 FMM5820QH Ka-Band Power Amplifier MMIC ■ Package Outline PIN ASSIGNMENT 1:RF IN 2:VGG 3:N.C. 4:VDD 5:RF OUT 6:N.C. 7:N.C. 8:N.C. 10 FMM5820QH Ka-Band Power Amplifier MMIC ■ Block Diagram and Recommended Bias Circuit VGG VDD 1uF 1uF 1:RF IN 2:VGG 3:N.C. 4:VDD 5:RF OUT 6:N.C. 7:N.C. 8:N.C. Note:The capacitors are recommended on the bias supply line, close to the package, in order to prevent video oscillations which could damage the module. 11 FMM5820QH Ka-Band Power Amplifier MMIC ■ Mounting Instructions for QH Package (1) The package may be attached using screws. Torque conditions are shown in Table 1. Table 1. Recommended and Maximum Torque for Screw Mounting Recommended Recommended Maximum Torque screw Torque QH M1.6* 15 N-cm (1.3 lb-in) 20 N-cm (1.8 lb-in) *Mounting with flat washer is recommended. Package (2) First, tighten the screws with a torque driver set to 5 N-cm. (3) The surface finish of the heat sink should be better than 0.8µm, and the surface flatness must be better than 10 µm. (4) Silicon based heat sink compounds should not be used for the thermal conductive grease. They cause poor grounding of the source flange, contamination and long term degradation of thermal resistance between the MMIC package and the heat sink. (5) The DC and RF interconnects may be gold bondwires or gold ribbons. The RF interconnects should be as short as possible. 12 FMM5820QH Ka-Band Power Amplifier MMIC Humidity Lifetime for FMM5820QH The following graph shows the lifetime of moisture resistance for the FMM5820QH. Each line in the graph indicates the lifetime that is the estimated failure rate of 0.1% at 10 years (Confidence Level = 90 %) and calculated from the results of pressure cooker (autoclave) bias test. The horizontal-axis shows typical ambient temperature. The vertical-axis shows relative humidity. The left side of the area delimited in each line indicates more than 10 years of lifetime. Field environmental conditions for operation In the case that FMM5820QH is mounted in a non-hermetic package, please refer to the following recommendations. Note 1. The graph lines are drawn using the operating conditions as shown in the box below. EUD recommends our customers use FMM5820QH within the left side area separated by each line in the graph below. Note 2. Please cut off the drain current by drain bias, not by gate bias. The humidity lifetime becomes shorter in case of gate cut off operation. Note 3. Please use FMM5820QH under environmental conditions of no dew condensation. Field Environmental Conditions for a 10 years Lifetime 100% 90% [Gate cut off operating] Relative Humidity (%) 80% (Vdd (Vdd=6V, Vdd=6V, Vgg=0V Vgg=0V -1 V) 24 hours/day Cut off 12 hours/day Cut off 6 hours/day Cut off 3 hours/day Cut off 70% 60% 50% [Drain cut off operating] 40% (Vgg=-0V, Vgg=-0V, Vdd=6V Vdd=6V Field Environmental Conditions. 20% 10% 0% 0 10 20 0V) --- 0 hours/day Cut off --- 12 hours/day Cut off --- 18 hours/day Cut off 30% 30 40 50 60 70 Typical Ambient Temperature (deg-C) (℃ ℃) 13 80 90 FMM5820QH Ka-Band Power Amplifier MMIC For further information please contact : Eudyna Devices USA Inc. 2355 Zanker Rd. San Jose, CA 95131-1138, U.S.A. TEL: +1 408 232-9500 FAX: +1 408 428-9111 CAUTION Eudyna Devices Inc. products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: ・Do not put these products into the mouth. Eudyna Devices Europe Ltd. Network House Norreys Drive Maidenhead, Berkshire SL6 4FJ United Kingdom TEL: +44 (0) 1628 504800 FAX: +44 (0) 1628 504888 ・Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these byproducts are dangerous to the human body if inhaled, ingested, or swallowed. ・Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Eudyna Devices International Srl Via Teglio 8/2 - 20158 Milano, Italy TEL: +39-02-8738-1695 Eudyna Devices Inc. reserves the right to change products and specifications without notice.The information does not convey any license under rights of Eudyna Devices Inc. or others. © 2006 Eudyna Devices Inc. Eudyna Devices Asia Pte. Ltd. Hong Kong Branch Suite 1906B, Tower 6, China Hong Kong City 33 Canton Road, Tsimshatsui, Kowloon Hong Kong TEL: +852-2377-0227 FAX: +852-2377-3921 Eudyna Devices Inc. 1000 Kamisukiahara, showa-cho Nakakomagun, Yamanashi 409-3883, Japan (Kokubo Industrial Park) TEL +81-55-275-4411 FAX +81-55-275-9461 Sales Division 1, Kanai-cho, Sakae-ku Yokohama, 244-0845, Japan TEL +81-45-853-8156 FAX +81-45-853-8170 14