Technical Data Sheet POWER LED 31-01UTC/S463 Features . High Flux Output. . Low Profile. . Low Thermal Resistance. . Low Power Consumption .Wide viewing angle 50° . The phosphor filled in the reflector converts the blue emission of InGaN chip to ideal white. . Typical chromaticity coordinates x=0.29, y=0.30 according to CIE1931. . ESD-withstand voltage: up to 4KV . Pb free. . The product itself will remain within RoHS compliant version. Descriptions This revolutionary package design allows the light designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions. This is possible through the efficient optical package design and high-current capabilities. The low profile package can be easily coupled with reflectors or lenses to efficiently distribute light and provide the desired light appearance. Applications . Automotive Exterior Lighting . Electronic Signs and Signals . Special Lighting application Device Selection Guide PART NO. 31-01UTC/S463 Chip Material Emitted Color InGaN/Sapphire White Lens Color Water Clear Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 1.0 Page: 1 of 6 Device Number :DLE-301-W01 Establish date: 07-15-2004 Establish by: Iverson Kuo 31-01UTC/S463 Package Dimensions Notes: 1.All dimensions are in millimeters 2.An epoxy meniscus may extend about 1.5mm(0.059") down the leads 3.Tolerances unless dimensions ±0.25mm Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Units Continuous Forward Current IF 30 mA Peak Forward Current(Duty 1/10 @ 1KHZ) IFP 100 mA Reverse Voltage VR 5 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ Soldering Temperature(T=5 sec) Tsol 260 ± 5 ℃ LED Junction Temperature Tj 115 ℃ Power Dissipation Pd 120 mW Zener Reverse Current Iz 100 mA Electrostatic Discharge ESD 4000 V Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 1.0 Page: 2 of 6 Device Number :DLE-301-W01 Establish date: 07-15-2004 Establish by: Iverson Kuo 31-01UTC/S463 Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Condition Unit Forward Voltage VF ---- 3.5 4.0 IF=20mA V Reverse Current IR ---- ---- 50 VR=5V mA Φv 630 1000 ---- IF=20mA mlm 2θ1/2 ---- 50 ---- IF=20mA deg x ---- 0.29 ---- Total Flux Viewing Angle Chromaticity Coordinates ---IF=20mA Zener Reverse Voltage y ---- 0.30 ---- Vz 5.8 ---- ---- Rank 31-01UTC/S463 □ (1) (1) VF(V) □ ---Iz=5mA V □ (2) (2) Color (3) (3)Φv(mlm) Bin. Min. Max. Bin. Min. Max. Bin. Min. Max. 0 2.80 3.00 A1 ---- ---- V 630 1250 1 3.00 3.20 A0 ---- ---- W 1000 2000 2 3.20 3.40 B3 1600 3200 3.40 3.60 B4 ------- X 3 ------- 4 3.60 3.80 ---- ---- 5 3.80 4.00 B5 B6 ---- ---- C0 ---- ---- *Measurement Uncertainty of Forward Voltage：±0.1V *Measurement Uncertainty of Luminous Intensity: ±15% Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 1.0 Page: 3 of 6 Device Number :DLE-301-W01 Establish date: 07-15-2004 Establish by: Iverson Kuo 31-01UTC/S463 CIE Chromaticity Diagram Color Ranks (IF=20mA，Ta=25℃) Color Ranks A1 A0 B3 B4 B5 B6 C0 CIE X 0.255 0.264 0.28 0.27 Y 0.245 0.267 0.248 0.23 X 0.264 0.283 0.296 0.28 Y 0.267 0.305 0.267 0.248 X 0.283 0.304 0.307 0.287 Y 0.305 0.33 0.315 0.295 X 0.304 0.33 0.33 0.307 Y 0.33 0.36 0.339 0.315 X 0.287 0.307 0.311 0.296 Y 0.295 0.315 0.294 0.276 X 0.307 0.33 0.33 0.311 Y 0.315 0.339 0.318 0.294 X 0.33 0.361 0.355 0.33 0.35 0.318 Y 0.36 0.385 Measurement uncertainty of the color coordinates：±0.01 Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 1.0 Page: 4 of 6 Device Number :DLE-301-W01 Establish date: 07-15-2004 Establish by: Iverson Kuo 31-01UTC/S463 Typical Electro-Optical Characteristics Curves Relative Intensity vs. Wavelength Forward Current vs. Forward Voltage 30 FORWARD CURRENT (mA) 1.2 RELATIVE INTENSITY 1.0 0.8 0.6 0.4 20 10 0.2 0 2.80 0.0 350 400 450 500 550 600 650 700 750 WAVELENGTH (nm) Relative Intensity vs. Forward Current 3.00 3.20 3.40 3.60 3.80 FORWARD VOLTAGE (V) 4.00 Forward Current vs. Ambient Temp. 40 1.00 FORWARD CURRENT (mA) RELATIVE INTENSITY 35 0.80 0.60 0.40 0.20 30 25 20 15 10 5 0.00 0 5 10 15 20 25 0 30 FORWARD CURRENT (mA) 0 20 40 60 80 AMBIENT TEMPERATURE (C) 100 Chromaticity Coordinate vs. Forward Current Radiation Characteristics 0.312 RELATIVE INTENSITY 0.308 Y 1.0 CIE (X,Y) 0.304 0.300 -80 -60 -40 -20 0 0 20 40 0.8 0.296 0.6 X 60 0.292 0.4 0.288 0.2 0.284 0.280 0 10 20 30 40 50 80 0.0 0 FORWARD CURRENT (mA) 1 Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 1.0 Page: 5 of 6 Device Number :DLE-301-W01 Establish date: 07-15-2004 Establish by: Iverson Kuo 31-01UTC/S463 Label Form Specification RoHS CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Iv & VF HUE: Color Bin Grade REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 1.0 Page: 6 of 6 Device Number :DLE-301-W01 Establish date: 07-15-2004 Establish by: Iverson Kuo 31-01UTC/S463 Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 4. Below the zener reference voltage Vz, all the current flows through LED and as the voltage rises to Vz, the zener diode “breakdown." If the voltage tries to rise above Vz current flows through the zener branch to keep the voltage at exactly Vz. 5. When the LED is connected using serial circuit, if either piece of LED is no light up but current can’t flow through causing others to light down. In new design, the LED is parallel with zener diode. if either piece of LED is no light up but current can flow through causing others to light. Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 1.0 Page: 7 of 6 Device Number :DLE-301-W01 Establish date: 07-15-2004 Establish by: Iverson Kuo 6. Soldering Condition Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to case, and soldering beyond the base of the tie bar is recommended. Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Recommended soldering conditions: Hand Soldering DIP Soldering Temp. at tip of iron 400℃ Max. (30W Max.) Preheat temp. 100℃ Max. (60 sec Max.) Soldering time 3 sec Max. Bath temp. 265 Max. Distance 3mm Min.(From solder joint Bath time. 5 sec Max. Distance 3mm Min. to case) EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 1.0 Page: 8 of 6 Device Number :DLE-301-W01 Establish date: 07-15-2004 Establish by: Iverson Kuo