Technical Data Sheet 333/R2C1-ATWB Features ․Popular T-1 3/4package. ․High efficiency. ․General purpose leads. ․Selected minimum intensities ․Available on tape and reel. ․ESD-withstand voltage: up to 4KV ․The product itself will remain within RoHS compliant version. Descriptions ․The series is specially designed for applications requiring higher brightness. ․The LED lamps are available with different colors, intensities, epoxy colors, etc. Applications ․Status indicators. ․Commercial use. ․Advertising Signs. ․Back lighting. Device Selection Guide LED Part No. 333/R2C1-ATWB Everlight Electronics Co., Ltd. Device Number : DLE-033-B22 Chip Material Emitted Color AlGaInP Hyper Red http\\:www.everlight.com Prepared date:05-11-2006 Rev 1 Lens Color Water Clear Page: 1 of 7 Prepared by: Grace Shen Technical Data Sheet 333/R2C1-ATWB Package Dimensions Notes: ․Other dimensions are in millimeters, tolerance is 0.25mm except being specified. ․Protruded resin under flange is 1.5mm Max LED. ․Bare copper alloy is exposed at tie-bar portion after cutting. Absolute Maximum Rating (Ta=25℃) Parameter Forward Current Symbol IF Absolute Maximum Rating 50 Unit mA Pulse Forward Current (Duty1/10@ 1KHz) IFP 100 mA Operating Temperature Storage Temperature Electrostatic Discharge Topr Tstg ESD -40 ~ +85 -40 ~ +100 4K ℃ ℃ V Soldering Temperature Tsol 260 ±5 ℃ Power Dissipation Pd 130 Zener Reverse Current Reverse Voltage Iz VR 100 5 mW mA V Notes: Soldering time≦5 seconds. Everlight Electronics Co., Ltd. Device Number : DLE-033-B22 http\\:www.everlight.com Prepared date:05-11-2006 Rev 1 Page: 2 of 7 Prepared by: Grace Shen Technical Data Sheet 333/R2C1-ATWB Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Luminous Intensity IV 7150 -- 18000 mcd Viewing Angle 2θ1/2 -- 15 -- deg Peak Wavelength λp -- 632 -- Condition IF=20mA Dominant Wavelength λd -- 624 -- Spectrum Half width Δλ -- 20 -- Forward Voltage VF 1.8 -- 2.6 V Zener Reverse Voltage Vz 5.2 -- -- V Iz=5mA Reverse Current IR -- -- 50 μA VR=5V nm Rank Combination (IF=20mA) Rank T U V W Luminous Intensity 7150~9000 9000~11250 11250~14250 14250~18000 *Measurement Uncertainty of Luminous Intensity: ±15% Rank Forward Voltage Unit:mcd 1 2 3 4 1.8~2.0 2.0~2.2 2.2~2.4 2.4~2.6 *Measurement Uncertainty of Forward Voltage: ±0.1V Rank 1 Unit:V 2 3 Dominant Wavelength 618~620 620~624 *Measurement Uncertainty of Dominant Wavelength ±1.0nm 624~628 Unit:nm *The quantity ratio of the ranks is decided by EVERLIGHT. Everlight Electronics Co., Ltd. Device Number : DLE-033-B22 http\\:www.everlight.com Prepared date:05-11-2006 Rev 1 Page: 3 of 7 Prepared by: Grace Shen Technical Data Sheet 333/R2C1-ATWB Typical Electro-Optical Characteristics Curves Relative Intensity vs. Wavelength Forward Current vs. Forward Voltage 50 Forward Current(mA) Relative Intensity 1.0 0.8 0.6 0.4 0.2 0.0 550 600 650 700 40 30 20 10 0 1.0 750 1.5 1.5 1.0 0.5 35 40 45 50 55 60 65 70 2.0 1.5 1.0 0.5 0.0 0 10 20 30 40 50 Forward Current(mA) Ambient Temperature Ta( C) Forward Current vs. Ambient Temp. Radiation Characteristics O 90 O 60 O 0 30 O O 10 1.0 50 O 20 O Relative Intensity(a.u.) Forward Current(mA) 3.5 2.5 O 40 30 20 10 0 3.0 Forward Current vs. Relative Intensity Relative Luminous Intensity(%) Relative Luminous Intensitu(%) Relative Intensity vs. Ambient Temp 2.0 30 2.5 Forward Voltage(V) Wavelength(nm) 0.0 25 2.0 30 O 40 O 50 O 60 0.5 O 70 O 80 O 0 20 40 60 80 100 0 Ambient Temperature Ta( C) Everlight Electronics Co., Ltd. Device Number : DLE-033-B22 0 0.5 Radiation Angle O http\\:www.everlight.com Prepared date:05-11-2006 Rev 1 Page: 4 of 7 Prepared by: Grace Shen 90 1.0 Technical Data Sheet 333/R2C1-ATWB Packing Quantity Specification 1.500PCS/1Bag，5Bags/1Box 2.10Boxes/1Carton Label Form Specification EVERLIGHT CPN: P/N: 333/R2C1-ATWB QTY： LOT NO： CAT: HUE: REF: CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks of Luminous Intensity and Forward Voltage HUE: Ranks of Dominant Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place MADE IN TAIWAN Everlight Electronics Co., Ltd. Device Number : DLE-033-B22 http\\:www.everlight.com Prepared date:05-11-2006 Rev 1 Page: 5 of 7 Prepared by: Grace Shen Technical Data Sheet 333/R2C1-ATWB Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 4. Below the zener reference voltage Vz, all the current flows through LED and as the voltage rises to Vz, the zener diode “breakdown." If the voltage tries to rise above Vz current flows through the zener branch to keep the voltage at exactly Vz. 5. When the LED is connected using serial circuit, if either piece of LED is no light up but current can’t flow through causing others to light down. In new design, the LED is parallel with zener diode. if either piece of LED is no light up but current can flow through causing others to light up. Everlight Electronics Co., Ltd. Device Number : DLE-033-B22 http\\:www.everlight.com Prepared date:05-11-2006 Rev 1 Page: 6 of 7 Prepared by: Grace Shen Technical Data Sheet 333/R2C1-ATWB 6. Soldering Condition Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to case, and soldering beyond the base of the tie bar is recommended. Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Recommended soldering conditions: Hand Soldering DIP Soldering Temp. at tip of iron 400℃ Max. (30W Max.) Preheat temp. 100℃ Max. (60 sec Max.) Soldering time 3 sec Max. Bath temp. 265 Max. Distance 3mm Min.(From solder joint to case) Bath time. 5 sec Max. Distance 3mm Min. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device Number : DLE-033-B22 Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, http:\\www.everlight.com http\\:www.everlight.com Prepared date:05-11-2006 Rev 1 Page: 7 of 7 Prepared by: Grace Shen