EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet White SMD Surface Mount Device 67-13/W3C-MW1X2/2T Features ․Fluorescence Type ․High Luminous Intensity ․High Efficiency ․Emission Color:x=0.29,y=0.30 ․Pb free ․The product itself will remain within RoHS compliant version. Descriptions The white LED which was fabricated using a blue LED and a phosphor, and the phosphor is excited by blue light and emits yellow fluorescence. The mixture of blue light and yellow light results in a white emission. Applications ․OA Equipment ․Backlighting of Full Color LCD ․Automotive Equipment ․Replacement of Conventional Light Bulbs and Fluorescent Lamps Device Selection Guide Chip Material Emitted Color InGaN White Lens Color Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-671-298 Date:31-Oct.-2005 Rev. 1 Page: 1 of 11 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-13/W3C-MW1X2/2T Package Dimensions CL CL 2 1 4 0.7±0.1 2.2±0.1 2.8±0.2 3 2 - 3 - 1 + 4 3.5±0.2 2.8±0.2 0.15±0.05 0.8±0.1 1.9±0.2 2.4±0.1 0.5±0.1 3.2±0.2 2.7±0.2 For reflow soldering(propose) 0.8±0.1 1.6 1.8 0.7 2.2 1.8 Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-671-298 Date:31-Oct.-2005 Rev. 1 Page: 2 of 11 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-13/W3C-MW1X2/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage*1 VR 5 V Forward Current*1 IF 25 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Electrostatic Discharge(HBM)*1 ESD 2000 V Power Dissipation*1 Pd 110 mW Peak Forward Current (Duty 1/10 @1KHz)*1 IFP 100 mA Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. * 1: The value are based on 1 die performance Notes: The products are sensitive to static electricity and care must be fully taken when handling products. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Units Condition Luminous Intensity*1 IV 1120 ------ 2850 mcd IF=20mA*2 Forward Voltage*2 VF ----- 3.3 3.7 V IF=20mA*2 Viewing Angle 2θ1/2 -- 120 -- deg IF=20mA*2 *1 When three LED dies are operated simultaneously. *2 For each die. Notes: 1.Tolerance of Luminous Intensity ±10% Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-671-298 Date:31-Oct.-2005 Rev. 1 Page: 3 of 11 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-13/W3C-MW1X2/2T Bin Range Of Luminous Intensity Bin Code Min. Max. W1 1120 1420 W2 1420 1800 X1 1800 2250 X2 2250 2850 Unit Condition mcd IF=20mA Notes: 1.Tolerance of Luminous Intensity ±10% Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-671-298 Date:31-Oct.-2005 Rev. 1 Page: 4 of 11 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-13/W3C-MW1X2/2T Chromaticity Coordinates Specifications for Bin Grading Group Bin Code B5-1 B5-2 M A0-1 A0-2 CIE_x CIE_y 0.291 0.287 0.297 0.300 0.300 0.297 0.307 0.309 0.272 0.264 0.276 0.282 0.282 0.276 0.287 0.292 0.286 0.295 0.305 0.295 0.295 0.305 0.315 0.305 0.258 0.267 0.281 0.272 0.272 0.281 0.295 0.286 Bin Code B5-3 B5-4 A0-3 A0-4 CIE_x CIE_y 0.296 0.292 0.300 0.304 0.304 0.300 0.309 0.311 0.280 0.272 0.282 0.288 0.288 0.282 0.292 0.296 0.276 0.286 0.295 0.285 0.285 0.295 0.305 0.294 0.248 0.258 0.272 0.262 0.262 0.272 0.286 0.276 0.32 0.31 B5-2 0.30 B5-4 B5-1 0.29 B5-3 A0-2 y 0.28 A0-4 0.27 A0-1 0.26 A0-3 0.25 0.24 0.26 0.27 0.28 0.29 0.30 0.31 x *The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01). Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-671-298 Date:31-Oct.-2005 Rev. 1 Page: 5 of 11 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-13/W3C-MW1X2/2T Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-671-298 Date:31-Oct.-2005 Rev. 1 Page: 6 of 11 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-13/W3C-MW1X2/2T Label explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-671-298 Date:31-Oct.-2005 Rev. 1 Page: 7 of 11 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-13/W3C-MW1X2/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-671-298 Date:31-Oct.-2005 Desiccant Rev. 1 Label Page: 8 of 11 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-13/W3C-MW1X2/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 3 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 4 High Temperature Storage Temp. : 100℃ 5 Low Temperature Storage Temp. : -40℃ 6 DC Operating Life IF = 20 mA / 25℃ 7 High Temperature / High Humidity 85℃/ 85%RH 1 2 Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-671-298 Date:31-Oct.-2005 Test Sample Ac/Re Hours/Cycles Size 6 min 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 22 PCS. 0/1 22 PCS. 0/1 22 PCS. 0/1 22 PCS. 0/1 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. Rev. 1 Page: 9 of 11 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-13/W3C-MW1X2/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-671-298 Date:31-Oct.-2005 Rev. 1 Page: 10 of 11 Prepared by: Venis Wu EVERLIGHT ELECTRONICS CO.,LTD. 67-13/W3C-MW1X2/2T 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-671-298 Date:31-Oct.-2005 Rev. 1 Page: 11 of 11 Prepared by: Venis Wu