EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LED 67-21/R7SC-AR2T1BZ3/2T/AM Features ․Pb-free. ․Inner reflector. ․White package. ․Optical indicator. ․P-LCC-2 package. ․Wide viewing angle. ․Colorless clear resin. ․Precondition：According to JEDEC Level-2. ․ESD：Up to 2KV. (According to JESD22-A114-B) ․The product itself will remain within RoHS compliant version. ․Suitable for vapor-phase reflow, infrared reflow and wave solder processes. Descriptions ․The 67-21 series is available for orange, green, blue and yellow or other color due to the different raw material. ․Base on the package design, the device result in wide view angle. Applications ․Automotive backlighting or indicator：Dashboard, switch, audio and video equipments…etc. ․Backlight：LCD, switches, symbol, mobile phone and illuminated advertising. ․Display for indoor and outdoor application：Traffic…etc. ․Ideal for coupling into light guides. ․Substitution of traditional light ․Optical indicator ․General applications. Device Selection Guide Chip Emitted Color Resin Color Dark Red Water Clear Material AlGaInP Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-520 prepared date:19-Apr-2007 Rev. 1 Prepared by:Teresa Lee Page: 1 of 12 EVERLIGHT ELECTRONICS CO.,LTD. 67-21/R7SC-AR2T1BZ3/2T/AM Package Dimensions Note：Tolerances unless dimension ±0.1mm. Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-520 prepared date:19-Apr-2007 Rev. 1 Prepared by:Teresa Lee Page: 2 of 12 EVERLIGHT ELECTRONICS CO.,LTD. 67-21/R7SC-AR2T1BZ3/2T/AM Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 12 V Forward Current IF 30 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Power Dissipation Pd 120 mW Junction Temperature Tj Operating Temperature Topr -40 ~ +100 ℃ Storage Temperature Tstg -40 ~ +110 ℃ Thermal resistance Soldering Temperature 115 ℃ Rth J-A 400 K/W Rth J-S 180 K/W Tsol Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-520 prepared date:19-Apr-2007 Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Rev. 1 Prepared by:Teresa Lee Page: 3 of 12 EVERLIGHT ELECTRONICS CO.,LTD. 67-21/R7SC-AR2T1BZ3/2T/AM Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Iv 140 ----- 360 mcd IF=30mA 2θ1/2 ----- 120 ----- deg IF=30mA Peak Wavelength λp ----- 639 ----- nm IF=30mA Dominant Wavelength λd 625.5 ----- 637.5 nm IF=30mA Spectrum Radiation Bandwidth Δλ ----- 20 ----- nm IF=30mA Forward Voltage VF 1.75 ----- 2.35 V IF=30mA Reverse Current IR ----- ----- 10 μA VR=12V Temperature coefficient of λp TCλp ----- 0.15 ----- nm/K IF=30mA Temperature coefficient of λd TCλd ----- 0.07 ----- nm/K IF=30mA Temperature coefficient of VF TCV ----- -2.20 ----- mV/K IF=30mA Luminous Intensity Viewing Angle Notes: 1.Tolerance of Luminous Intensity：±11% 2.Tolerance of Dominant Wavelength：±1nm 3.Tolerance of Forward Voltage：±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-520 prepared date:19-Apr-2007 Rev. 1 Prepared by:Teresa Lee Page: 4 of 12 EVERLIGHT ELECTRONICS CO.,LTD. 67-21/R7SC-AR2T1BZ3/2T/AM Bin Range of Dominant Wavelength Group Bin Code Min. Max. E6 625.5 629.5 E7 629.5 633.5 E8 633.5 637.5 A Unit Condition nm IF=30mA Unit Condition mcd IF=30mA Unit Condition V IF=30mA Notes： Tolerance of Dominant Wavelength：±1nm Bin Range of Luminous Intensity Bin Min Max R2 140 180 S1 180 225 S2 225 285 T1 285 360 Notes： Tolerance of Luminous Intensity：±11% Bin Range of Forward Voltage Group B Bin Min Max 0 1.75 1.95 1 1.95 2.15 2 2.15 2.35 Notes： Tolerance of Forward Voltage：±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-520 prepared date:19-Apr-2007 Rev. 1 Prepared by:Teresa Lee Page: 5 of 12 EVERLIGHT ELECTRONICS CO.,LTD. 67-21/R7SC-AR2T1BZ3/2T/AM Typical Electro-Optical Characteristics Curves (Ta=25℃) Typical Curve of Spectral Distribution： Relative Intensity (%) 100 V(λ) R7S 50 0 400 450 500 550 600 650 700 Wp (nm) Note：V(λ) = Standard eye response curve；IF =20 mA Diagram characteristics of radiation 20 30 View Angle 50 60 70 80 90 10 o 0 o 1.0 o o 0.8 o 0.6 o 0.4 o 0.2 o o 0 1.0 0.8 0.6 0.4 0.2 0 20 o Relative Intensity Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-520 prepared date:19-Apr-2007 o 60 40 View Angle Rev. 1 Prepared by:Teresa Lee o 80 o Page: 6 of 12 Relative Intensity 40 o EVERLIGHT ELECTRONICS CO.,LTD. 67-21/R7SC-AR2T1BZ3/2T/AM Forward Current vs. Forward Voltage Forward Current I F (mA) 100 10 1 0.1 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 Forward Voltage V F (V) IF(mA) Forward Current vs. Ambient Temperature. 40 35 30 25 20 15 10 5 0 0 20 40 60 80 100 T (degree C) Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-520 prepared date:19-Apr-2007 Rev. 1 Prepared by:Teresa Lee Page: 7 of 12 EVERLIGHT ELECTRONICS CO.,LTD. 67-21/R7SC-AR2T1BZ3/2T/AM R elativ e Lu m in o u s In ten sity Relative Luminous Intensity vs. Junction Temperature. 1 .6 1 .4 1 .2 1 0 .8 0 .6 0 .4 0 .2 0 -2 0 0 20 40 60 80 100 120 100 120 Ju n ctio n Tem p er atu r e Tj Note：f(Tj) = Iv / Iv(25℃)；IF=20mA Relative Forward Voltage vs. Junction Temperature. Relative Forward Voltage 0.4 0.3 0.2 0.1 0 -0.1 -0.2 -0.3 -0.4 -20 0 20 40 60 80 Ju n ctio n Tem p er atu r e Note：△VF = VF - VF (25 ℃) = f(Tj)；IF=20mA Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-520 prepared date:19-Apr-2007 Rev. 1 Prepared by:Teresa Lee Page: 8 of 12 EVERLIGHT ELECTRONICS CO.,LTD. 67-21/R7SC-AR2T1BZ3/2T/AM Label explanation ․CPN：Customer’s Production Number ․P/N：Production Number ․QTY：Packing Quantity ․CAT：Luminous Intensity Rank ․HUE：Dom. Wavelength Rank ․REF：Forward Voltage Rank ․LOT No：Lot Number Reel Dimensions 2.2 0.5 178.0 1.0 60.0 1.0 9.0 1.0 12.0 1.0 13.0 0.5 Note：Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-520 prepared date:19-Apr-2007 Rev. 1 Prepared by:Teresa Lee Page: 9 of 12 EVERLIGHT ELECTRONICS CO.,LTD. 67-21/R7SC-AR2T1BZ3/2T/AM Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Progressive direction 1.5+0.1 1.75 3.5±0.05 4.0 0.23 8.0±0.3 4.0±0.1 1.75 2.0±0.05 3.23 2.24 Polarity Note：Tolerances unless dimension ±0.1mm. Unit = mm Moisture Resistant Packaging Process and Materials Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-520 prepared date:19-Apr-2007 Desiccant Rev. 1 Prepared by:Teresa Lee Label Page: 10 of 12 EVERLIGHT ELECTRONICS CO.,LTD. 67-21/R7SC-AR2T1BZ3/2T/AM Precautions for Use 1. Soldering Condition 1.1 (A) Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. (B) Recommend soldering pad Note：Tolerances unless dimension ±0.1mm. Unit = mm 1.2 Reflow soldering should not be done more than two times. 1.3 When soldering, do not put stress on the LED during heating. 1.4 After soldering, do not warp the circuit board. 2. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 3. Storage 3.1 Do not open moisture proof bag before the products are ready to use. 3.2 Before opening the package: The LED should be kept at 30℃ or less and 90%RH or less. 3.3 After opening the package: The LED floor life is 1 year under 30℃ or less and 60% RH or less. If unused LED remain, it should be stored in moisture proof packages. Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-520 prepared date:19-Apr-2007 Rev. 1 Prepared by:Teresa Lee Page: 11 of 12 EVERLIGHT ELECTRONICS CO.,LTD. 67-21/R7SC-AR2T1BZ3/2T/AM 3.4 If the moisture absorbent material (silica gel) has faded away or the LED have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-520 prepared date:19-Apr-2007 Rev. 1 Prepared by:Teresa Lee Page: 12 of 12