EVERLIGHT 67-23SDRSUGSUBC/TR8

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
Full Color Top View LEDs
67-23SDRSUGSUBC/TR8
Features
․P-LCC-4 package.
․White package.
․Optical indicator.
․Colorless clear window.
․Ideal for backlight and light pipe application.
․Inter reflector.
․Low (2mA) current operation.
․Wide viewing angle.
․Suitable for vapor-phase reflow, Infrared reflow and
wave solder processes.
․Computable with automatic placement equipment.
․Available on tape and reel (8mm Tape).
․Pb-free.
․The product itself will remain within RoHS compliant version.
Descriptions
․The 67-23 series is available in soft orange, green,blue
and yellow. Due to the package design, the LED has wide
viewing angle and optimized light coupling by inter
reflector. This feature makes the ideal for light pipe
application. The low current requirement makes this
device ideal for portable equipment or any other
application where power is at a premium.
Applications
․Automotive: backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD’s, switches and symbols.
․Light pipe application.
․General use.
Device Selection Guide
Chip
Type
SDR
Material
AlGaInP
Emitted Color
Deep-Red
SUG
InGaN/SiC
Brilliant Green
SUB
InGaN/SiC
Blue
Lens Color
Water Clear
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.2
Page: 1 of 10
Device No. : DSE-673-014
Prepared date: 18-Sep-2005
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-23SDRSUGSUBC/TR8
Package Dimensions
CL
3
CL
0.7±0.1
2.2±0.1
2.8±0.2
1
4
2
+
2
3.2±0.2
3.5±0.2
- Red
3
- Green
1
- Blue
0.5±0.1
2.8±0.2
0.71±0.1
0.8± 0.1
1.8±0.2
0.15± 0.05
2.4±0.1
4
2.7±0.2
For reflow soldering (propose)
0.8±0.1
1.6±0.1
1.8±0.1
2.2±0.1
0.7±0.1
1.8±0.1
Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.2
Page: 2 of 10
Device No. : DSE-673-014
Prepared date: 18-Sep-2005
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-23SDRSUGSUBC/TR8
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
SDR
25
SUG
30
SUB
30
mA
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40~ +100
℃
Electrostatic Discharge(HBM)
Power Dissipation
Peak Forward Current
(Duty 1/10 @ 1KHZ)
ESD
Pd
IFP
SDR
2000
SUG
1000
SUB
1000
SDR
60
SUG
130
SUB
130
SDR
60
SUG
100
SUB
100
V
mW
mA
Reflow Soldering : 260 ℃ for 10 sec.
Soldering Temperature
Tsol
Hand Soldering : 350 ℃ for 3 sec.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.2
Page: 3 of 10
Device No. : DSE-673-014
Prepared date: 18-Sep-2005
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-23SDRSUGSUBC/TR8
Electro-Optical Characteristics (Ta=25℃)
Parameter
Luminous Intensity
Peak Wavelength
Dominant Wavelength
Spectrum Radiation
Bandwidth
Forward Voltage
Symbol
IV
λp
λd
△λ
VF
Min.
Typ.
Max.
SDR
32
57
-----
SUG
125
216
-----
SUB
63
112
-----
SDR
-----
650
-----
SUG
-----
518
-----
SUB
-----
468
-----
SDR
-----
639
-----
SUG
-----
525
-----
SUB
-----
470
-----
SDR
-----
20
-----
SUG
-----
36
-----
SUB
-----
26
-----
SDR
1.7
2.0
2.4
SUG
-----
3.5
4.3
SUB
-----
3.5
4.3
Unit
Condition
mcd
IF=20mA
nm
IF=20mA
nm
IF=20mA
nm
IF=20mA
V
IF=20mA
Viewing Angle
2θ1/2
-----
120
-----
deg
IF=20mA
Reverse Current
IR
-----
-----
10
μA
VR=5V
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.2
Page: 4 of 10
Device No. : DSE-673-014
Prepared date: 18-Sep-2005
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-23SDRSUGSUBC/TR8
Typical Electro-Optical Characteristics Curves
SDR
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.2
Page: 5 of 10
Device No. : DSE-673-014
Prepared date: 18-Sep-2005
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-23SDRSUGSUBC/TR8
Typical Electro-Optical Characteristics Curves
SUG
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.2
Page: 6 of 10
Device No. : DSE-673-014
Prepared date: 18-Sep-2005
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-23SDRSUGSUBC/TR8
SUB
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.2
Page: 7 of 10
Device No. : DSE-673-014
Prepared date: 18-Sep-2005
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-23SDRSUGSUBC/TR8
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: Tolerances Unless Dimension ±0.1mm,Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.2
Page: 8 of 10
Device No. : DSE-673-014
Prepared date: 18-Sep-2005
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-23SDRSUGSUBC/TR8
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: Tolerances Unless Dimension ±0.1mm
Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.2
Page: 9 of 10
Device No. : DSE-673-014
Prepared date: 18-Sep-2005
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-23SDRSUGSUBC/TR8
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
No.
Items
1
Reflow Soldering
2
Temperature Cycle
3
4
5
Thermal Shock
High Temperature
Storage
Low Temperature
Storage
Test Condition
Temp. : 260℃±5℃
Min. 5sec.
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
Test
Sample
Ac/Re
Hours/Cycles Size
6 min
22 PCS.
0/1
300 Cycles
22 PCS.
0/1
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
300 Cycles
22 PCS.
0/1
Temp. : 100℃
1000 Hrs.
22 PCS.
0/1
Temp. : -40℃
1000 Hrs.
22 PCS.
0/1
6
DC Operating Life
IF = 20 mA
1000 Hrs.
22 PCS.
0/1
7
High Temperature /
High Humidity
85℃/ 85%RH
1000 Hrs.
22 PCS.
0/1
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.2
Page: 10 of 10
Device No. : DSE-673-014
Prepared date: 18-Sep-2005
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-23SDRSUGSUBC/TR8
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.2
Page: 11 of 10
Device No. : DSE-673-014
Prepared date: 18-Sep-2005
Prepared by: Teresa Lee
EVERLIGHT ELECTRONICS CO.,LTD.
67-23SDRSUGSUBC/TR8
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a doSUBle-head soldering iron should be used (as below figure). It should be
confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by
repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.2
Page: 12 of 10
Device No. : DSE-673-014
Prepared date: 18-Sep-2005
Prepared by: Teresa Lee