EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet (Preliminary) Power Top View LED 67-31AUBC/B001/TR8 Features ․P-LCC-3 package. ․High flux output. ․High current capability. ․White package. ․Optical indicator. ․Colorless clear window. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Wide viewing angle. ․Suitable for automatic placement equipment. ․Suitable for reflow and wave solder processes. ․Available on tape and reel (8mm Tape). ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions The 67-31A series is available in soft orange, red and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Indicator and backlight for audio and video equipment. ․Indicator and backlight in office and family equipment. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Material InGaN/SiC Emitted Color Blue Everlight Electronics Co., Ltd. Device No. : Lens Color Water Clear http://www.everlight.com prepared date:28-Sep-2006 Rev. 2 Page: 1 of 9 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-31AUBC/B001/TR8 Package Dimensions Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Sep-2006 Rev. 2 Page: 2 of 9 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-31AUBC/B001/TR8 Absolute Maximum Ratings (TA=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Power Dissipation Pd 120 mW Junction Temperature Tj 125 ℃ Electrostatic Discharge(HBM) ESD 2000 V Operating Temperature Topr -40 ~ +100 ℃ Storage Temperature Tstg -40~ +110 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electronic Optical Characteristics : Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 140 ----- 285 mcd IF=30mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=30mA Peak Wavelength λP ----- 468 ----- nm IF=30mA Dominant Wavelength λd 463.0 ----- 472.0 nm IF=30mA Spectrum Radiation Bandwidth △λ ----- 26 ----- nm IF=30mA Forward Voltage VF ----- 3.7 4.0 V IF=30mA Reverse Current IR ----- ----- 10 μA VR=5V Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Sep-2006 Rev. 2 Page: 3 of 9 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-31AUBC/B001/TR8 Bin Range Of Dominant Wavelength Bin Code Min. Max. Unit Condition 1 2 463.0 467.5 467.5 472.0 nm IF=30mA Bin Range Of Luminous Intensity Bin Min Max Unit Condition R2 S1 S2 140 180 225 180 225 285 mcd IF=30mA Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Sep-2006 Rev. 2 Page: 4 of 9 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-31AUBC/B001/TR8 Typical Electro-Optical Characteristics Curves Typical curve of spectral distribution: V(λ)=Standard eye response curve Relative Intensity (%) 100 Blue V(λ) 50 0 400 450 500 550 600 650 700 Wp (nm) Diagram characteristics of radiation : 20 30 View Angle 50 60 70 80 90 o 0 o 1.0 o o 0.8 o 0.6 o 0.4 o Relative Intensity 40 10 o 0.2 o o 0 1.0 0.8 0.6 0.2 0.4 0 20 o Relative Intensity Everlight Electronics Co., Ltd. Device No. : o 60 40 View Angle http://www.everlight.com prepared date:28-Sep-2006 o Rev. 2 80 o Page: 5 of 9 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-31AUBC/B001/TR8 Forward Current vs. Forward Voltage Ta=25℃ Forward Current I F (mA) 100 10 1 2.5 2.7 2.9 3.1 3.3 3.5 3.7 3.9 For war d Voltage V F (V) Forward Current v.s. Ambient Temp. 40 IF (mA) 30 20 10 0 0 20 40 60 80 100 120 T (degree C) Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Sep-2006 Rev. 2 Page: 6 of 9 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-31AUBC/B001/TR8 Label explanation CAT: Luminous Intensity Rank RoHS HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm,Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Sep-2006 Rev. 2 Page: 7 of 9 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-31AUBC/B001/TR8 Carrier Tape Dimensions; Loaded quantity per reel 2000 PCS/reel Note: Tolerances Unless Dimension ±0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. Device No. : Desiccant http://www.everlight.com prepared date:28-Sep-2006 Label Rev. 2 Page: 8 of 9 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-31AUBC/B001/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile B. Recommend soldering pad 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Sep-2006 Rev. 2 Page: 9 of 9 Prepared by:Rita Shen