EVERLIGHT 7344-G2T3-AQTB

Technical Data Sheet
7344/G2T3-AQTB/X
Features
˙Popular T-1 3/4package.
˙High efficiency.
˙General purpose leads.
˙Selected minimum intensities.
˙Available on tape and reel.
˙The product itself will remain within RoHS compliant version..
˙ESD-withstand voltage: up to 4K V
Descriptions
˙The series is specially designed for applications
requiring higher brightness.
˙The LED lamps are available with different
colors, intensities, epoxy colors, etc.
Applications
˙Status indicators.
˙Commercial use.
˙Advertising Signs.
˙Back lighting.
Device Selection Guide
LED Part No.
7344/G2T3-AQTB/P
7344/G2T3-AQTB
Chip
Material
InGaN
Emitted Color
Super
Green
Lens Color
Green
Trans
Stopper
Yes
No
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Rev 2
Page: 1 of 8
Device Number : DLE-734-095
Prepared date: 11-08-2005
Prepared by: Flourix Chen
Technical Data Sheet
7344/G2T3-AQTB/X
Package Dimensions
Stopper type
No Stopper type
Notes:
˙Other dimensions are in millimeters, tolerance is 0.25mm except being specified.
˙Protruded resin under flange is 1.5mm Max LED.
˙Bare copper alloy is exposed at tie-bar portion after cutting.
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Rev 2
Page: 2 of 8
Device Number : DLE-734-095
Prepared date: 11-08-2005
Prepared by: Flourix Chen
Technical Data Sheet
7344/G2T3-AQTB/X
Absolute Maximum Rating (Ta=25℃)
Parameter
Symbol
Absolute Maximum Rating
Unit
Forward Current
IF
25
mA
Pulse Forward Current (Duty1/10@ 1KHz)
IFP
100
mA
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +100
℃
VR
5
V
Electrostatic Discharge
ESD
4K
V
Soldering Temperature
Tsol
260 ±5
℃
Power Dissipation
Pd
110
mW
Iz
100
mA
Reverse Voltage
Zener Reverse Current
Notes: Soldering time≦5 seconds.
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Radiometric Intensity
IV
3600
5650
----
mcd
Viewing Angle
2θ1/2
----
30
----
deg
Peak Wavelength
λp
----
518
----
Dominant Wavelength
λd
----
525
----
Spectrum Half width
Δλ
----
35
----
Forward Voltage
VF
----
----
4.0
V
IR
----
----
50
uA
VR=5V
Vz
5.2
----
----
V
Iz=5mA
Reverse Current
Zener Reverse Voltage
nm
Condition
IF=20mA
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Rev 2
Page: 3 of 8
Device Number : DLE-734-095
Prepared date: 11-08-2005
Prepared by: Flourix Chen
Technical Data Sheet
7344/G2T3-AQTB/X
Rank Combination (IF=20mA)
Rank
Luminous Intensity
Q
R
S
T
3600~4500
4500~5650
5650~7150
7150~9000
*Measurement Uncertainty of Luminous Intensity: ±15%
Rank
Forward Voltage
Unit: :mcd
B
1
2
3
4
5
3.0~3.2
3.2~3.4
3.4~3.6
3.6~3.8
3.8~4.0
*Measurement Uncertainty of Forward Voltage: ±0.1V
Rank
3
Unit:V
4
5
Dominant Wavelength
520~524
524~528
*Measurement Uncertainty of Dominant Wavelength ±1.0nm
528~532
Unit:nm
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Rev 2
Page: 4 of 8
Device Number : DLE-734-095
Prepared date: 11-08-2005
Prepared by: Flourix Chen
Technical Data Sheet
7344/G2T3-AQTB/X
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Rev 2
Page: 5 of 8
Device Number : DLE-734-095
Prepared date: 11-08-2005
Prepared by: Flourix Chen
Technical Data Sheet
7344/G2T3-AQTB/X
Packing Quantity Specification
1.500PCS/1Bag,5Bags/1Box
2.10Boxes/1Carton
Label Form Specification
EVERLIGHT
CPN:
P/N:
RoHS
7344/G2T3-AQTB/X
QTY:
LOT NO:
CAT:
HUE:
REF:
CPN: Customer’s Production Number
P/N : Production Number
QTY: Packing Quantity
CAT: Ranks of Luminous and Forward Voltage
HUE: Ranks of Dominant Wavelength
REF: Reference
LOT No: Lot Number
MADE IN TAIWAN: Production Place
MADE IN TAIWAN
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Rev 2
Page: 6 of 8
Device Number : DLE-734-095
Prepared date: 11-08-2005
Prepared by: Flourix Chen
Technical Data Sheet
7344/G2T3-AQTB/X
Notes
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions for
using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any
damage resulting from use of the product which does not comply with the absolute maximum
ratings and the instructions included in these specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT
corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s
consent.
4. Below the zener reference voltage Vz, all the current flows through LED and as the voltage
rises to Vz, the zener diode “breakdown." If the voltage tries to rise above Vz current flows
through the zener branch to keep the voltage at exactly Vz.
5. When the LED is connected using serial circuit, if either piece of LED is no light up but current
can’t flow through causing others to light down. In new design, the LED is parallel with zener
diode. if either piece of LED is no light up but current can flow through causing others to light
up.
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Rev 2
Page: 7 of 8
Device Number : DLE-734-095
Prepared date: 11-08-2005
Prepared by: Flourix Chen
Technical Data Sheet
7344/G2T3-AQTB/X
6. Soldering Condition
Careful attention should be paid during soldering. When soldering, leave more then 3mm
from solder joint to case, and soldering beyond the base of the tie bar is recommended.
Avoiding applying any stress to the lead frame while the LEDs are at high temperature
particularly when soldering.
Recommended soldering conditions:
Hand Soldering
DIP Soldering
Temp. at tip of iron
400℃ Max. (30W
Max.)
Preheat temp.
100℃ Max. (60 sec Max.)
Soldering time
3 sec Max.
Bath temp.
265 Max.
Distance
3mm Min.(From solder
joint to case)
Bath time.
5 sec Max.
Distance
3mm Min.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http:\\www.everlight.com
Everlight Electronics Co., Ltd.
http\\:www.everlight.com
Rev 2
Page: 8 of 8
Device Number : DLE-734-095
Prepared date: 11-08-2005
Prepared by: Flourix Chen