EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View LED (Through Hole Type) 94-22/G6C-AQ2S1 Features z White package. z Dual-chip, wide-angle, low-profile LEDs . z Excellent chip to chip consistency z Super Intensity z High performance z Pb-free. z The product itself will remain within RoHS compliant version. Applications z Automotive: backlighting in dashboard and switch. z Telecommunication: indicator and backlighting in telephone and fax. z Indicator and backlight for audio and video equipment. z Indicator and backlight for battery driven equipment. z Display Screen Illumination on Portable Handheld Devices z Indicator and backlight in office equipment. z General use. Device Selection Guide Chip Emitted Color Resin Color Brilliant Yellow Green Water Clear Material AlGaInP Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-942-086 prepared date: 01-Apr-2007 Rev. 1 Page: 1 of 7 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 94-22/G6C-AQ2S1 Package Dimensions Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-942-086 prepared date: 01-Apr-2007 Rev. 1 Page: 2 of 7 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 94-22/G6C-AQ2S1 Absolute Maximum Ratings @Ta=25℃ Parameter Symbol Rating Unit Reverse Voltage VR 5 V Power Dissipation Pd 60 mW Peak Forward Current (Duty 1/10 @ 1KHZ) IFP 60 mA Forward Current IF 25 mA Electrostatic Discharge(HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics @ Ta=25℃ Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity IV 90 ----- 225 mcd IF=20mA Viewing Angle 2θ1/2 ----- 130 ----- deg IF=20mA Peak Wavelength λp ----- 575 ----- nm IF=20mA Dominant Wavelength λd 569.5 ----- 577.5 nm IF=20mA Spectrum Radiation Bandwidth △λ ----- 20 ----- nm IF=20mA Forward Voltage VF 3.50 ----- 4.70 V IF=20mA Reverse Current IR ----- ----- 10 uA VR=5V Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-942-086 prepared date: 01-Apr-2007 Rev. 1 Page: 3 of 7 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 94-22/G6C-AQ2S1 Bin Range Of Dominant Wavelength Bin Code Min. C16 569.5 C17 571.5 C18 573.5 C19 575.5 Bin Range Of Luminous Intensity Bin Code Min. Q2 90 R1 112 R2 140 S1 180 Notes: Max. 571.5 573.5 575.5 577.5 Unit Condition nm IF=20mA Max. 112 140 180 225 Unit Condition mcd IF=20mA 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-942-086 prepared date: 01-Apr-2007 Rev. 1 Page: 4 of 7 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 94-22/G6C-AQ2S1 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-942-086 prepared date: 01-Apr-2007 Rev. 1 Page: 5 of 7 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 94-22/G6C-AQ2S1 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition 1 Soldering Heat Temp. : 260℃±5℃ Min. 5 sec. Test Sample Ac/Re Hours/Cycles Size 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 3 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA / 25℃ 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/85%RH 1000 Hrs. 22 PCS. 0/1 2 Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-942-086 prepared date: 01-Apr-2007 6 Min. Rev. 1 Page: 6 of 7 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 94-22/G6C-AQ2S1 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-942-086 prepared date: 01-Apr-2007 Rev. 1 Page: 7 of 7 Prepared by:Teresa Lee