EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary High Performance SMD LED with Reflector 93-22SURSYGC/S530-A3/TR8 Features ․Package in 12mm tape on 7” diameter reels. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․EIA std. package. ․IC compatible. ․Pb-free. ․The product itself will remain within RoHS compliant version. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Indicator and backlight for audio and video equipment. ․Indicator and backlight for battery driven equipment. ․Small indicator for outdoor applications. ․Indicator and backlight in office equipment. ․Flat backlight for LED, switches and symbol. ․General use. Device Selection Guide Chip Emitted Color Type Material SUR AlGaInP Brilliant Red SYG AlGaInP Brilliant Yellow Green Resin Color Water Clear Everlight Electronics Co., Ltd http://www.everlight.com Rev. 1.1 Page: 1 of 11 Device No.: DSE-932-032 Prepared date: 20-Nov-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary High Performance SMD LED with Reflector 93-22SURSYGC/S530-A3/TR8 Package Dimensions SUR SYG For reflow soldering (propose) Notes: 1. All dimensions are in millimeters. 2. Tolerance unless mentioned is ±0.1mm. Everlight Electronics Co., Ltd http://www.everlight.com Rev. 1.1 Page: 2 of 11 Device No.: DSE-932-032 Prepared date: 20-Nov-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary High Performance SMD LED with Reflector 93-22SURSYGC/S530-A3/TR8 Absolute Maximum Ratings @Ta=25℃ Parameter Symbol Rating Unit Reverse Voltage VR 5 V 25 mA 60 mA 60 mW ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +100 ℃ Soldering Temperature Tsol Forward Current Peak Forward Current (Duty 1/10 @ 1KHz) Power Dissipation Electrostatic Discharge(HBM) SUR IF SYG SUR IFP SYG SUR Pd SYG Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd http://www.everlight.com Rev. 1.1 Page: 3 of 11 Device No.: DSE-932-032 Prepared date: 20-Nov-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary High Performance SMD LED with Reflector 93-22SURSYGC/S530-A3/TR8 Electro-Optical Characteristics @ Ta=25℃ Parameter Luminous Intensity Symbol IV Viewing Angle Typ. Max. SUR 17 41 ----- SYG 11 17 ----- ----- 130 ----- SUR ----- 632 ----- SYG ----- 575 ----- SUR ----- 624 ----- SYG ----- 573 ----- SUR ----- 20 ----- SYG ----- 20 ----- SUR ----- 2.0 2.4 SYG ----- 2.0 2.4 ----- ----- 10 2θ1/2 Peak Wavelength λp Dominant Wavelength λd Spectrum Radiation Bandwidth △λ Forward Voltage VF Reverse Current Min. IR Unit Condition mcd IF=20mA deg IF=20mA nm IF=20mA nm IF=20mA nm IF=20mA V IF=20mA μA VR=5V Everlight Electronics Co., Ltd http://www.everlight.com Rev. 1.1 Page: 4 of 11 Device No.: DSE-932-032 Prepared date: 20-Nov-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary High Performance SMD LED with Reflector 93-22SURSYGC/S530-A3/TR8 Typical Electro-Optical Characteristics Curves(SUR) Forward Current vs. Forward Voltage Spectrum Distribution Ta=25°C 75 50 25 0 550 600 650 700 Wavelength λ (nm) 40 30 20 10 0 1.2 750 100 10 1000 2.4 2.8 3.0 f=1KHz Duty=1/10 100 10 1 0 10 20 40 60 80 100 2 1 10 10 Forward Current I F (mA) Ambient Temperature Ta (°C) Radiation Diagram Forward Current Derating Curve 0° 30 Forward Current IF (mA) 2.0 Relative Luminous Intensity vs. Forward Current Ta=25°C Relative luminous intensity (%) Relative luminous intensity (%) 1000 0 1.6 Forward Voltage VF (V) Relative Luminous Intensity vs. Ambient Temperature 1 -60 -40 -20 Ta=25°C 50 Forward Current I F (mA) Relative luminous intensity (%) 100 20 10° Ta=25°C 20° 30° 40° 1.0 10 0.9 50° 0.8 60° 0.7 0 0 20 40 60 80 3 10 100 0.5 0.3 0.1 0.2 0.4 0.6 70° 80° 90° Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd http://www.everlight.com Rev. 1.1 Page: 5 of 11 Device No.: DSE-932-032 Prepared date: 20-Nov-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary High Performance SMD LED with Reflector 93-22SURSYGC/S530-A3/TR8 Typical Electro-Optical Characteristics Curves(SYG) Forward Current vs. Forward Voltage Spectrum Distribution Ta=25°C 75 50 25 40 30 20 10 0 450 550 600 500 Wavelength λ (nm) 0 Relative luminous intensity (%) Relative luminous intensity (%) 2.4 2.8 3.0 Relative Luminous Intensity vs. Forward Current Ta=25°C 100 10 1000 f=1KHz Duty=1/10 100 10 1 0 10 20 40 60 80 100 2 1 10 10 Forward Current I F (mA) Ambient Temperature Ta (°C) Radiation Diagram Forward Current Derating Curve 0° 30 Forward Current IF (mA) 2.0 Forward Voltage VF (V) 1000 0 1.6 1.2 650 Relative Luminous Intensity vs. Ambient Temperature 1 -60 -40 -20 Ta=25°C 50 Forward Current IF (mA) Relative luminous intensity (%) 100 20 10° Ta=25°C 20° 30° 40° 1.0 10 0.9 50° 0.8 60° 0.7 0 0 20 40 60 80 100 3 10 0.5 0.3 0.1 0.2 0.4 0.6 70° 80° 90° Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd http://www.everlight.com Rev. 1.1 Page: 6 of 11 Device No.: DSE-932-032 Prepared date: 20-Nov-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary High Performance SMD LED with Reflector 93-22SURSYGC/S530-A3/TR8 Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: Tolerance unless mentioned is ±0.1mm; Unit = mm Everlight Electronics Co., Ltd http://www.everlight.com Rev. 1.1 Page: 7 of 11 Device No.: DSE-932-032 Prepared date: 20-Nov-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary High Performance SMD LED with Reflector 93-22SURSYGC/S530-A3/TR8 Carrier Tape Dimensions: Loaded quantity per reel 1000 PCS/reel Note: Tolerance unless mentioned is ±0.1mm; Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd http://www.everlight.com Rev. 1.1 Page: 8 of 11 Device No.: DSE-932-032 Prepared date: 20-Nov-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary High Performance SMD LED with Reflector 93-22SURSYGC/S530-A3/TR8 Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 min 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 H : +100℃ 15min 2 Temperature Cycle ∫ 5 min L : -40℃ 15min H : +100℃ 5min 3 Thermal Shock ∫ 10 sec L : -10℃ 5min 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd http://www.everlight.com Rev. 1.1 Page: 9 of 11 Device No.: DSE-932-032 Prepared date: 20-Nov-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary High Performance SMD LED with Reflector 93-22SURSYGC/S530-A3/TR8 Precautions for Use 1. Over-current-proof Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd http://www.everlight.com Rev. 1.1 Page: 10 of 11 Device No.: DSE-932-032 Prepared date: 20-Nov-2007 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet - Preliminary High Performance SMD LED with Reflector 93-22SURSYGC/S530-A3/TR8 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd http://www.everlight.com Rev. 1.1 Page: 11 of 11 Device No.: DSE-932-032 Prepared date: 20-Nov-2007 Prepared by: Josh Chou