Technical Data Sheet POWER LED @150mA Current 30-02UYC/S599 Benefits . Fewer LEDs Required . Lowers Lighting System Cost . Viewing angle 50° Features . High Flux Output. . Designed for High Current Operation. . Low Thermal Resistance. . Low Profile. . Packaged in Tubes for Use with Automatic Insertion Equipment. . The product itself will remain within RoHS compliant version . ESD-withstand voltage: up to 4KV Descriptions This revolutionary package design allows the light designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions. This is possible through the efficient optical package design and high-current capabilities. The low profile package can be easily coupled with reflectors or lenses to efficiently distribute light and provide the desired light appearance. Applications . Automotive Exterior Lighting . Electronic Signs and Signals . Special Lighting application Device Selection Guide PART NO. 30-02UYC/S599 Chip Material Emitted Color AlGaInP Yellow Lens Color Water Clear Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev. 2 Page: 1 of 7 Device number: DLE-320-002 Established date: 06-22-2007 Established by: Jim Lin Technical Data Sheet POWER LED @150mA Current 30-02UYC/S599 Package Dimensions Notes: 1.All dimensions are in millimeters 2.An epoxy meniscus may extend about 1.5mm(0.059") down the leads 3.Tolerances unless dimensions 0.25mm Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Units Continuous Forward Current IF 150 mA Peak Forward Current(Duty 1/10 @ 1KHZ) IFP 200 mA Reverse Voltage VR 5 V Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -55 ~ +100 Soldering Temperature(T=5 sec) Tsol 260 ± 5 LED Junction Temperature Tj 125 Power Dissipation Pd 400 mW ESD 4K V Electrostatic Discharge Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev. 2 Page: 2 of 7 Device number: DLE-320-002 Established date: 06-22-2007 Established by: Jim Lin Technical Data Sheet POWER LED @150mA Current 30-02UYC/S599 Electro-Optical Characteristics (Ta=25) Parameter Symbol Min. Typ. Max. Condition Unit Total Flux v 9000 11000 18000 IF=150mA mlm Viewing Angle 21/2 ---- 50 ---- IF=150mA deg Peak Wavelength p ---- 591 ---- IF=70mA nm Dominant Wavelength d 585.5 590 594.5 IF=70mA nm Spectrum Radiation Bandwidth ---- 15 ---- IF=70mA nm Forward Voltage VF 1.9 2.3 2.9 IF=150mA V Reverse Current IR ---- ---- 10 VR=10V uA Rank 30-02UYC/S599 (1) (2) (3) (2) d(nm) (1) VF(V) (3)v(mlm) Bin Min Max Bin Min Max Bin Min Max L 1.9 2.1 2 585.5 587.0 U 9000 11250 M 2.1 2.3 3 587.0 588.5 V 11250 14250 N 2.3 2.5 4 588.5 590.0 W 14250 18000 P 2.5 2.7 5 590.0 591.5 Q 2.7 2.9 6 7 591.5 593.0 593.0 594.5 *Measurement Uncertainty of Forward Voltage0.1V *Measurement Uncertainty of Luminous Intensity: 15% *Measurement Uncertainty of Dominant Wavelength 1.0nm Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev. 2 Page: 3 of 7 Device number: DLE-320-002 Established date: 06-22-2007 Established by: Jim Lin Technical Data Sheet POWER LED @150mA Current 30-02UYC/S599 Typical Electro-Optical Characteristics Curves Relative Intensity vs. Wavelength Forward Current vs. Forward Voltage 1.00 Forward Current (mA) RELATIVE INTENSITY 150 0.50 120 90 60 30 0 0.00 540 560 580 600 620 WAVELENGTH (nm) 1.6 640 1.8 2.0 2.2 2.4 Forward Voltage (V) Relative Intensity vs. Forward Current Forward Current vs. Ambient Temp. 160 1.0 Forward Current(mA) 140 Relative Intensity 0.8 0.6 0.4 0.2 120 100 80 60 40 20 0 0 0.0 0 20 40 60 80 100 120 20 40 60 80 140 100 O Ambient Temperature Ta( C) Forward Current (mA) Relative Intensity vs. Angle Displacement Relative Intensity vs. Off Axis Angle 1.00 R E L A T IV E IN T E N S IT Y 0 20 -4 0 40 -6 0 60 0.50 80 -8 0 1 .0 RELATIVEINTENSITY -2 0 0 .8 0 .6 0 .4 0 .2 0 .0 0 .2 0 .4 0 .6 0 .8 1 .0 0.00 -90 -60 -30 0 30 60 VIEWING ANGLE (DEGREE) Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev. 2 Page: 4 of 7 Device number: DLE-320-002 Established date: 06-22-2007 Established by: Jim Lin 90 Technical Data Sheet POWER LED @150mA Current 30-02UYC/S599 Packing Quantity Specification (1) 60 pcs/1 tube, 30 tubes/1 small inside box, 12 small inside boxes/1 outside box (2) 60 pcs/1 tube, 105 tubes/1 big inside box, 4 big inside boxes/1 outside box Label Form Specification (1)Tube Label Form PART NO: 30-02UYC/S599 QTY: 60 LOT NO: CAT: (2)Box Label Form EVERLIGHT CPN: P/N: RoHS 30-02UYC/S599 QTY CAT: HUE: LOT NO REF: MADE IN TAIWAN PART NO: Everlgiht’s Production Number QTY: Packing Quantity LOT NO: Lot Number CAT: Ranks of Forward Voltage, Dominant Wavelength and Total Flux CPN: Customer’s Production Number P/N : Production Number HUE: Reference REF: Reference MADE IN TAIWAN: Production Place Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev. 2 Page: 5 of 7 Device number: DLE-320-002 Established date: 06-22-2007 Established by: Jim Lin Technical Data Sheet POWER LED @150mA Current 30-02UYC/S599 Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 4. Below the zener reference voltage Vz, all the current flows through LED and as the voltage rises to Vz, the zener diode “breakdown." If the voltage tries to rise above Vz current flows through the zener branch to keep the voltage at exactly Vz. 5. When the LED is connected using serial circuit, if either piece of LED is no light up but current can’t flow through causing others to light down. In new design, the LED is parallel with zener diode. if either piece of LED is no light up but current can flow through causing others to light. Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev. 2 Page: 6 of 7 Device number: DLE-320-002 Established date: 06-22-2007 Established by: Jim Lin Technical Data Sheet POWER LED @150mA Current 30-02UYC/S599 6. Soldering Condition Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to case, and soldering beyond the base of the tie bar is recommended. Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Recommended soldering conditions: Hand Soldering DIP Soldering Temp. at tip of iron 400 Max. (30W Max.) Preheat temp. 100 Max. (60 sec Max.) Soldering time 3 sec Max. Bath temp. 265 Max. Distance 3mm Min.(From solder Bath time. 5 sec Max. Distance 3mm Min. joint to case) EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev. 2 Page: 7 of 7 Device number: DLE-320-002 Established date: 06-22-2007 Established by: Jim Lin