FILTRONIC FMS2014-001-TB

FMS2014-001
Data Sheet 3.0
High Power GaAs SPDT Switch
Features:
♦
♦
♦
♦
♦
♦
♦
Functional Schematic
3x3x0.9mm Packaged pHEMT Switch
Excellent low control voltage performance
Excellent harmonic performance under
GSM/DCS/PCS/EDGE power levels
Very high Tx-Rx isolation: >28dB typ. at
1.8GHz
Very low Insertion loss: 0.5dB at 1.8GHz
Very low control current
RoHS compliant
ANT
V1
V2
RF1
RF2
Description and Applications:
The FMS2014-001 is a low loss, high power and linear single pole double throw Gallium Arsenide
antenna switch designed for use in mobile handset applications. The die is fabricated using the
Filtronic FL05 0.5μm switch process technology, which offers excellent performance optimised for
switch applications. The FMS2014-001 is designed for use in dual/tri and quad band GSM handset
antenna switch modules and RF front-end modules. It can also find use in other applications where
high power and linear RF switching is necessary.
Electrical Specifications:
Parameter
Test Conditions
Insertion Loss
0.5 – 1.0 GHz
1.0 – 2.0 GHz
Min
Typ
Max
Units
0.45
0.5
dB
0.5
0.55
dB
Return Loss
0.5 – 2.5 GHz
16
20
dB
Isolation
0.5 – 1.0 GHz
-30
-32
dB
1.0 – 2.0 GHz
-26
-30
dB
1 GHz, Pin = +35 dBm, 100% Duty Cycle
-60
-70
dBc
2 GHz, Pin = +33 dBm, 100% Duty Cycle
-65
-75
dBc
1 GHz, Pin = +35 dBm, 100% Duty Cycle
-60
-70
dBc
2 GHz, Pin = +33 dBm, 100% Duty Cycle
-65
-75
dBc
2nd Harmonic Level
3rd Harmonic Level
Switching speed : Trise, Tfall
Ton, Toff
Control Current
Note:
(TAMBIENT = 25°C,Vctrl = 0V/2.5V, ZIN = ZOUT = 50Ω)
μs
10% to 90% RF and 90% to 10% RF
<0.3
1.0
5
10
50% control to 90% RF and 50% control to 10% RF
+35dBm RF input @1GHz
External DC blocking capacitors are required on all RF ports (typ: 100pF)
1
Preliminary specifications subject to change without notice
Filtronic Compound Semiconductors Ltd
Contact Details (UK): Tel: +44 (0) 1325 301111 Fax: +44 (0) 1325 306177 Email: [email protected]
Contact Details (USA): Tel: +1 (408) 850 5790
Fax: +1 (408) 850 5766
Email: [email protected]
Website: www.filtronic.com
μs
μA
FMS2014-001
Data Sheet 3.0
Absolute Maximum Ratings:
Parameter
Symbol
Absolute Maximum
Max Input Power
Pin
+38dBm
Control Voltage
V ctrl
+5V
Operating Temp
T oper
-40°C to +100°C
Storage Temp
T stor
-55°C to +150°C
Note: Exceeding any one of these absolute maximum ratings may cause permanent damage to the
device.
Truth Table:
Switch
State
VC1
VC2
ANT– RF1
ANT– RF2
(A)
HIGH
LOW
Insertion Loss
Isolation
(B)
LOW
HIGH
Isolation
Insertion Loss
General Test Conditions:
LOW = 0V to 0.2V
Bias Voltages
HIGH +2.5V to +5V
Port Impedances
50Ω
Off arm termination
50Ω
2
Preliminary specifications subject to change without notice
Filtronic Compound Semiconductors Ltd
Contact Details (UK): Tel: +44 (0) 1325 301111 Fax: +44 (0) 1325 306177 Email: [email protected]
Contact Details (USA): Tel: +1 (408) 850 5790
Fax: +1 (408) 850 5766
Email: [email protected]
Website: www.filtronic.com
FMS2014-001
Data Sheet 3.0
Typical Measured Performance on Evaluation Board (De-Embedded):
(Measurement Conditions VCTRL = 2.5V (high) & 0V (low), TAMBIENT = 25°C unless otherwise stated)
FMS2014QFN INSERTION LOSS
0
-0.1
-0.2
-0.3
dB
-0.4
-0.5
-0.6
-0.7
-0.8
-0.9
-1
0.5
1
1.5
2
Frequency (GHz)
2.5
3
FMS 2014QFN ISOLATION
-20
-22.5
dB
-25
-27.5
-30
-32.5
-35
0.5
1
1.5
2
Frequency (GHz)
2.5
3
FMS2014QFN RETURN LOSS
0
-5
-10
dB
-15
-20
-25
-30
-35
-40
0.5
1
1.5
2
Frequency (GHz)
2.5
3
3
Preliminary specifications subject to change without notice
Filtronic Compound Semiconductors Ltd
Contact Details (UK): Tel: +44 (0) 1325 301111 Fax: +44 (0) 1325 306177 Email: [email protected]
Contact Details (USA): Tel: +1 (408) 850 5790
Fax: +1 (408) 850 5766
Email: [email protected]
Website: www.filtronic.com
FMS2014-001
Data Sheet 3.0
Pad Layout:
V1
Pin 1
12
ANT
11
V2
10
9
2
RF1
8
7
3
4
5
RF2
6
*View from the top of the package
Pin Number
Description
1
N/C
2
N/C
3
RF1
4
N/C
5
N/C
6
N/C
7
RF2
8
N/C
9
N/C
10
V2
11
ANT RF
12
V1
QFN 12 Lead 3*3 Package Outline:
4
Preliminary specifications subject to change without notice
Filtronic Compound Semiconductors Ltd
Contact Details (UK): Tel: +44 (0) 1325 301111 Fax: +44 (0) 1325 306177 Email: [email protected]
Contact Details (USA): Tel: +1 (408) 850 5790
Fax: +1 (408) 850 5766
Email: [email protected]
Website: www.filtronic.com
FMS2014QFN
Preliminary Data Sheet 3.0
Evaluation Board:
BOM
C7
Label
Component
C3,C4
Capacitor, 470pF, 0603
C1,C2,C7
Capacitor, 100pF, 0402
C5,C6
Capacitor, 47pF, 0402
C6
C5
C1
C2
C3
C4
Preferred evaluation board material is 0.25 mm thick
ROGERS RT4350. All RF tracks should be 50 ohm
BOARD
characteristic impedance.
Evaluation Board De-Embedding Data (Measured):
FMS2014QFN CAL BOARD INSERTION LOSS
0
-0.1
-0.2
-0.3
dB
-0.4
-0.5
-0.6
-0.7
-0.8
-0.9
-1
0.5
1
1.5
2
Frequency (GHz)
2.5
3
5
Preliminary specifications subject to change without notice
Filtronic Compound Semiconductors Ltd
Contact Details (UK): Tel: +44 (0) 1325 301111 Fax: +44 (0) 1325 306177 Email: [email protected]
Contact Details (USA): Tel: +1 (408) 850 5790
Fax: +1 (408) 850 5766
Email: [email protected]
Website: www.filtronic.com
FMS2014QFN
Preliminary Data Sheet 3.0
Tape & Reel Specification:
Tape Dimensions
Description
Symbol
Size (mm)
Perforation
Diameter
D0
1.5 ±0.1
Pitch
P0
4.0 ±0.1
Position
E1
1.75 ±0.1
Length
A0
3.3 ±0.1
Width
B0
3.3 ±0.1
Depth
K
1.1 ±0.1
Cavity to Perforation
P2
2.0 ±0.1
F
5.5 ±0.1
W
12 ±0.3
Cavity
Distance between centre lines
(length direction)
Cavity to Perforation
(width direction)
Carrier tape
Width
6
Preliminary specifications subject to change without notice
Filtronic Compound Semiconductors Ltd
Contact Details (UK): Tel: +44 (0) 1325 301111 Fax: +44 (0) 1325 306177 Email: [email protected]
Contact Details (USA): Tel: +1 (408) 850 5790
Fax: +1 (408) 850 5766
Email: [email protected]om
Website: www.filtronic.com
Preliminary Data Sheet 3.0
FMS2014QFN
Preferred Assembly Instructions:
Available on request.
Disclaimers:
This product is not designed for use in any space based or life sustaining/supporting equipment.
Handling Precautions:
To avoid damage to the devices care should be exercised during handling. Proper Electrostatic
Discharge (ESD) precautions should be observed at all stages of storage, handling, assembly, and
testing. These devices should be treated as Class 1A (250-500 V) as defined in JEDEC Standard No.
22-A114. Further information on ESD control measures can be found in MIL-STD-1686 and MILHDBK-263.
Application Notes & Design Data:
Application Notes and design data, including S-parameters, are available on request.
Disclaimers:
This product is not designed for use in any space based or life sustaining/supporting equipment.
Ordering Information:
Part Number
Description
Packaged Die
FMS2014-001-TR
Tape & Reel (minimum quantity: 1k pcs)
FMS2014-001-TB
Packaged Die supplied in a Tube
FMS2014-001-EB
Packaged Die mounted on Evaluation Board
7
Preliminary specifications subject to change without notice
Filtronic Compound Semiconductors Ltd
Contact Details (UK): Tel: +44 (0) 1325 301111 Fax: +44 (0) 1325 306177 Email: [email protected]
Contact Details (USA): Tel: +1 (408) 850 5790
Fax: +1 (408) 850 5766
Email: [email protected]
Website: www.filtronic.com