CERAMIC RESIN SEALED SMD CRYSTAL MODEL: FE FEATURES • • • • • OPTIONS Low Cost • Tolerances to < 20 PPM High Frequency Range • Stabilities to < 15 PPM Fundamental to 50 MHz (BT Cut)• Temperatures to -40ºC ~ +85ºC Resin Sealed • 1.4mm Height Max Tape and Reel (2,000 pcs. STD) • 2 Additional Footprints (FH, FL) • PART NUMBER Learn More - Internet Required Part Number Model Number Frequency Range (MHz) 219-Frequency-xxxxx FE 6.000 ~ 160.000 Internet required • STANDARD SPECIFICATIONS1 PARAMETERS Frequency Range Frequency Tolerance @ 25ºC Frequency Stability, ref @ 25ºC Over Operating Temp Range Temperature Range Operating (TOPR) Storage (TSTG) Shunt Capacitance (Co) Load Capacitance (CL) Learn more about: Part Marking Identification Tape and Reel Specification MAX (unless otherwise noted) 6.000 ~ 160.000 MHz ±50 PPM Drive Level Aging per year ±50PPM -10ºC ~ +60ºC -40ºC ~ +85ºC 7.0 pF 10 pF ~ Series (Customer Specified) 0.5 mW ±5 PPM 1 Other stabilities & operating temperature ranges available. Consult Fox Customer Service for specific requirements. All specifications subject to change without notice. Rev. 6/1/04 Frequency Range (MHz) 6.000 ~ 8.000 8.000+ ~ 16.000 16.000+ ~ 50.000 28.000 ~ 84.000 84.000+ ~ 160.000 Operating Mode Max ESR Ω Fundamental Fundamental Fundamental 3rd OT 5th OT 80 60 40 60 80 All dimensions are in millimeters. FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1(239)693-0099 FAX +1(239)693-1554 http://www.foxonline.com © 2004 FOX ELECTRONICS 17