3.3V HCMOS CERAMIC SMD OSCILLATOR WITH STANDBY MODEL: F4200 SERIES FEATURES • • • • OPTIONS 3.3V Operation • 5.0V (F3400) Version Available HCMOS Output Standby Function Tape and Reel (2,000 pcs. STD) • PART NUMBER SELECTION Learn More - Internet Required Part Number 129-Frequency-xxxxx 130-Frequency-xxxxx 131-Frequency-xxxxx 132-Frequency-xxxxx 133-Frequency-xxxxx 506-Frequency-xxxxx 134-Frequency-xxxxx Model Frequency Number Stability1 F4200 ±100PPM F4200R ±100PPM F4205 ±50PPM F4205R ±50PPM F4206 ±25PPM F4206R ±25PPM* F4208 ±20PPM* Operating Temperature (ºC) -10 ~ +70 -40 ~ +85 -10 ~ +70 -40 ~ +85 -10 ~ +70 -40 ~ +85 -10 ~ +70 Frequency Range (MHz) 1.544 ~ 50.000 1.544 ~ 50.000 1.544 ~ 50.000 1.544 ~ 50.000 1.544 ~ 50.000 1.544 ~ 50.000 1.544 ~ 50.000 Learn more about: Part Marking Identification Tape and Reel Specification Mechanical Specification Internet required • ELECTRICAL CHARACTERISTICS MAX PARAMETERS Frequency Range (FO) Storage Temperature Range (TSTG) Supply Voltage (VDD) Input Current (IDD) Output Symmetry (50% VDD) Rise Time (10% ~ 90% VDD) (TR) Fall Time (90% ~ 10% VDD) (TF) Output Voltage (VOL) (VOH) Output Current (IOL) (IOH) Output Load (HCMOS) Standby Current Start-up Time (TS) Output Disable Time 2 Output Enable Time 2 (unless otherwise noted) 1.544 ~ 50.000 MHz -55ºC ~ +125ºC 3.3V ± 10% 20mA 40% ~ 60% 6nS 6nS 10% VDD 90% VDD Min 2mA Min -2mA Min 15pF 10µA 10mS 150nS 10mS 1 Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load change, aging, shock, and vibration. *Excludes Shock/Vibration 2 An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open. All specifications subject to change without notice. Rev. 6/1/04 All dimensions are in millimeters. • ENABLE / DISABLE FUNCTION INH (Pin 1) OUTPUT (Pin 3) OPEN 2 ACTIVE '1' Level VIH ≥ 70% VDD ACTIVE '0' Level VIL ≤ 30% VDD High Z FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1(239)693-0099 FAX +1(239)693-1554 http://www.foxonline.com © 2004 FOX ELECTRONICS 51