FPM,FAM Data sheet Sensing element/Absolute Features Applications . Dual-In-line-Package(DIP)or SMD, Easy to mount on PCB . Barometric pressure measurable . Industrial instrumentation . Medical device . Barometer, Altimeter . Altitude compensation Part number for ordering FAM - 15P A S R Terminal leads direction(See Outline Diagram) No mark : Model FPM FAM Pressure type A : Absolute pressure R: Terminal leads configuration No mark : DIP(FPM) S : Surface mount package(FAM) Rated pressure(PSI) Pressure type Absolute pressure FPM FAM Dual-In-line-Package(DIP) Surface mount package Model Package configuration Measurable pressure range(kPa) 66.7 +66.7 FPM-15PA Part number for ordering FPM-15PAR FAM-15PASR Specifications Model/Rated pressure Recommended operating conditions Pressure type Rated pressure 15PA Absolute pressure 34.66 168.0 0.3535 1.713 0 168.0 Non-corrosive gas 1.5 Accuray Measurable pressure range Pressure media Excitation current (Constant) Absolute maximum rating Maximum load pressure Twice of rated pressure Maximum excitation current 3 Operating temperature 20 100 Storage temperature 40 120 Operating humidity 30 80 (No dew condensation) Electric performances/characteristics (Excitation current I=1.5mA constant, Ambient temperature Ta=25 ) Full scale span voltage 80 160 Offset voltage 50 130 (at 101.3kPa . abs) Bridge impedance 4000 6000 Mechanical response time 2 (For the reference) Temperature sensitivity of offset (TSO) 3 Temperature coefficient of sensitivity (TCS) 2.5 Linearity 0.3 Pressure hystersis 0.2 1 Unit kPa . abs kg/cm2 . abs kPa. abs mADC mADC RH mV mV msec FS/0 50 FS/0 50 FS FS FPM,FAM Data sheet Sensing element/Absolute Outline dimensions Unit (mm) FPM (Absolute pressure) 8 5.5 12 Pressure port 2.85 5 4 1 2 3 3 R 14 4 5 6 3 2 1 15.24(600mil) 1. 5 6 C 5 5 0. 0.5 60 1.2 2.54 2.54 Labelled faceplate Recommended footprint for PCB 6- 0.9(Diameter of through holes) 6- 1.8(Diameter of lands) 2.54 2.54 2.8 6.8 15.2 unit(mm) Unit (mm) 0.25 FPM-R (Absolute pressure) 5 4 1 2 3 8 Pressure port 2.85 4 5 6 3 2 1 5 5 0. C 15.24(600mil) 14 3 R 1. 5 6 5.5 max.15 12 Recommended footprint for PCB 2.54 2.54 6- 0.9(Diameter of through holes) 6- 1.8(Diameter of lands) 2.8 2.54 2.54 60 1.2 0.5 Labelled faceplate 6.8 15.2 2 unit(mm) FPM,FAM Data sheet Sensing element/Absolute Outline dimensions Unit (mm) FAM 2.54 2.54 2 3 7 1 Pressure port 6 5 4 0.8 7 Index X. MA 6 5 4 Labelled faceplate Recommended footprint for PCB 10.3 1.4 1.7 Land-pads 1 3 2 3 2.54 2.54 15 0.8 3.5 0.25 10 M AX. 0.15 1 3 9.4 unit (mm) FPM,FAM Data sheet Sensing element/Absolute Connection diagram Unit (mm) FPM (Absolute pressure) i 1.5mA 5 Output voltage R2 Constant current source R1 6 4 1 R3 R4 6 2 VR0 1 Zero balancing trimmer (VR0) is available. VR0 :200 Unit (mm) FAM i 1.5mA 2 Output voltage R2 Constant current source R1 1 3 6 R3 R4 5 1 VR0 6 Zero balancing trimmer (VR0) is available. VR0 :200 Note ; Please read instruction “Notes” before using the sensor. Fujikura reserves the right to change specifications without notice. If you have any questions regarding technical issues or specifications, please contact us. Sensor Engineering Department 5-1 Kiba 1-chome, Koto-ku, Tokyo 135-8512, Japan Phone +81-(0)3-5606-1072 Fax. +81-(0)3-5606-1538 4 E-mail : [email protected]