G9161 Global Mixed-mode Technology Inc. 400mA High PSRR, LDO Regulators Features General Description The G9161 series is a low supply current, high PSRR, and low dropout linear regulator that comes in a SOT-89, SOT-223, TO-252 and SOP-8 with Power PAD package. The supply current at no-load is 90µA. Operating voltage range is from 2.50V to 5.50V. The over-current protection limit is set at 550mA typical. An over- temperature protection circuit is built-in in the Device to prevent thermal overload. Low, 90µA No-Load Supply Current Guaranteed 400mA Output Current PSRR=65dB @ 120Hz; 55dB @ 1kHz Over-Temperature Protection and Short-Circuit Protection Output Voltage: 1.20V~5.00V (G9161-XXX) Stable with low cost ceramic capacitors The output voltage range is from 1.2V to 5.0V. Applications CD ROM or DVD ROM DVD Player Audio Codec Ordering Information ORDER NUMBER MARKING VOLTAGE TEMP. RANGE PACKAGE (Pb free) G9161-120T25U G9161-120T45U 9161AA 9161-120 1.2V 1.2V -40°C~ +85°C -40°C~ +85°C SOT-89 TO-252 G9161-120T65U 9161-120 1.2V G9161-120F1U 9161AA 1.2V For other output voltage, please contact us at [email protected] Note: T2: SOT-89, T4: TO-252, T6: SOT-223, F1: SOP-8 (FD) 5: Bonding Code U: Tape & Reel -40°C~ +85°C -40°C~ +85°C SOT-223 SOP-8 (FD) Pin Configuration Typical Application Circuit Top View G9161 1 IN 2 3 GND OUT SOT-89、 SOT-223 IN IN 1 8 NC/GND IN 2 7 NC/GND OUT 3 6 GND OUT 4 5 NC/GND OUT IN 4.7µF G9161 OUT 4.7µF GND SOP-8 (FD) 1 IN 3 2 GND OUT TO-252 Note: Recommend connecting the Thermal Pad to the GND for excellent power dissipation. TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 1.1 May 05, 2006 1 Global Mixed-mode Technology Inc. G9161 Selector Guide ORDER NUMBER OUTPUT VOLTAGE (V) MARKING G9161-120T25U G9161-130T25U G9161-140T25U G9161-150T25U G9161-160T25U G9161-170T25U G9161-180T25U G9161-190T25U G9161-200T25U G9161-210T25U G9161-220T25U G9161-230T25U G9161-240T25U G9161-250T25U G9161-260T25U G9161-270T25U G9161-280T25U G9161-285T25U G9161-290T25U G9161-300T25U G9161-310T25U G9161-315T25U G9161-320T25U G9161-330T25U G9161-340T25U G9161-350T25U G9161-360T25U G9161-370T25U G9161-380T25U G9161-390T25U G9161-400T25U G9161-410T25U G9161-420T25U G9161-430T25U G9161-440T25U G9161-450T25U G9161-460T25U G9161-470T25U G9161-475T25U G9161-480T25U G9161-490T25U G9161-500T25U 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00 2.10 2.20 2.30 2.40 2.50 2.60 2.70 2.80 2.85 2.90 3.00 3.10 3.15 3.20 3.30 3.40 3.50 3.60 3.70 3.80 3.90 4.00 4.10 4.20 4.30 4.40 4.50 4.60 4.70 4.75 4.80 4.90 5.00 9161AA 9161AB 9161AC 9161AD 9161AE 9161AF 9161AG 9161AH 9161AI 9161AJ 9161AK 9161AL 9161AM 9161AN 9161AO 9161AP 9161AQ 9161AR 9161AS 9161AT 9161AU 9161AV 9161AW 9161AX 9161AY 9161AZ 9161BA 9161BB 9161BC 9161BD 9161BE 9161BF 9161BG 9161BH 9161BI 9161BJ 9161BK 9161BL 9161BM 9161BN 9161BO 9161BP T2: SOT-89 TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 1.1 May 16, 2006 2 Global Mixed-mode Technology Inc. G9161 Selector Guide ORDER NUMBER OUTPUT VOLTAGE (V) MARKING G9161-120T45U G9161-130T45U G9161-140T45U G9161-150T45U G9161-160T45U G9161-170T45U G9161-180T45U G9161-190T45U G9161-200T45U G9161-210T45U G9161-220T45U G9161-230T45U G9161-240T45U G9161-250T45U G9161-260T45U G9161-270T45U G9161-280T45U G9161-285T45U G9161-290T45U G9161-300T45U G9161-310T45U G9161-315T45U G9161-320T45U G9161-330T45U G9161-340T45U G9161-350T45U G9161-360T45U G9161-370T45U G9161-380T45U G9161-390T45U G9161-400T45U G9161-410T45U G9161-420T45U G9161-430T45U G9161-440T45U G9161-450T45U G9161-460T45U G9161-470T45U G9161-475T45U G9161-480T45U G9161-490T45U G9161-500T45U 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00 2.10 2.20 2.30 2.40 2.50 2.60 2.70 2.80 2.85 2.90 3.00 3.10 3.15 3.20 3.30 3.40 3.50 3.60 3.70 3.80 3.90 4.00 4.10 4.20 4.30 4.40 4.50 4.60 4.70 4.75 4.80 4.90 5.00 9161-120 9161-130 9161-140 9161-150 9161-160 9161-170 9161-180 9161-190 9161-200 9161-210 9161-220 9161-230 9161-240 9161-250 9161-260 9161-270 9161-280 9161-285 9161-290 9161-300 9161-310 9161-315 9161-320 9161-330 9161-340 9161-350 9161-360 9161-370 9161-380 9161-390 9161-400 9161-410 9161-420 9161-430 9161-440 9161-450 9161-460 9161-470 9161-475 9161-480 9161-490 9161-500 T4: TO-252 TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 1.1 May 16, 2006 3 Global Mixed-mode Technology Inc. G9161 Selector Guide ORDER NUMBER G9161-120T65U G9161-130T65U G9161-140T65U G9161-150T65U G9161-160T65U G9161-170T65U G9161-180T65U G9161-190T65U G9161-200T65U G9161-210T65U G9161-220T65U G9161-230T65U G9161-240T65U G9161-250T65U G9161-260T65U G9161-270T65U G9161-280T65U G9161-285T65U G9161-290T65U G9161-300T65U G9161-310T65U G9161-315T65U G9161-320T65U G9161-330T65U G9161-340T65U G9161-350T65U G9161-360T65U G9161-370T65U G9161-380T65U G9161-390T65U G9161-400T65U G9161-410T65U G9161-420T65U G9161-430T65U G9161-440T65U G9161-450T65U G9161-460T65U G9161-470T65U G9161-475T65U G9161-480T65U G9161-490T65U G9161-500T65U T6: SOT-223 OUTPUT VOLTAGE (V) MARKING 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00 2.10 2.20 2.30 2.40 2.50 2.60 2.70 2.80 2.85 2.90 3.00 3.10 3.15 3.20 3.30 3.40 3.50 3.60 3.70 3.80 3.90 4.00 4.10 4.20 4.30 4.40 4.50 4.60 4.70 4.75 4.80 4.90 5.00 9161-120 9161-130 9161-140 9161-150 9161-160 9161-170 9161-180 9161-190 9161-200 9161-210 9161-220 9161-230 9161-240 9161-250 9161-260 9161-270 9161-280 9161-285 9161-290 9161-300 9161-310 9161-315 9161-320 9161-330 9161-340 9161-350 9161-360 9161-370 9161-380 9161-390 9161-400 9161-410 9161-420 9161-430 9161-440 9161-450 9161-460 9161-470 9161-475 9161-480 9161-490 9161-500 TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 1.1 May 16, 2006 4 Global Mixed-mode Technology Inc. G9161 Selector Guide ORDER NUMBER G9161-120F1U G9161-130 F1U G9161-140 F1U G9161-150 F1U G9161-160 F1U G9161-170 F1U G9161-180 F1U G9161-190 F1U G9161-200 F1U G9161-210 F1U G9161-220F1U G9161-230F1U G9161-240F1U G9161-250F1U G9161-260F1U G9161-270F1U G9161-280F1U G9161-285F1U G9161-290F1U G9161-300 F1U G9161-310 F1U G9161-315 F1U G9161-320 F1U G9161-330 F1U G9161-340 F1U G9161-350 F1U G9161-360 F1U G9161-370 F1U G9161-380 F1U G9161-390 F1U G9161-400 F1U G9161-410 F1U G9161-420 F1U G9161-430 F1U G9161-440 F1U G9161-450 F1U G9161-460 F1U G9161-470 F1U G9161-475 F1U G9161-480 F1U G9161-490 F1U G9161-500 F1U F1: SOP-8 (FD) OUTPUT VOLTAGE (V) MARKING 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00 2.10 2.20 2.30 2.40 2.50 2.60 2.70 2.80 2.85 2.90 3.00 3.10 3.15 3.20 3.30 3.40 3.50 3.60 3.70 3.80 3.90 4.00 4.10 4.20 4.30 4.40 4.50 4.60 4.70 4.75 4.80 4.90 5.00 9161AA 9161AB 9161AC 9161AD 9161AE 9161AF 9161AG 9161AH 9161AI 9161AJ 9161AK 9161AL 9161AM 9161AN 9161AO 9161AP 9161AQ 9161AR 9161AS 9161AT 9161AU 9161AV 9161AW 9161AX 9161AY 9161AZ 9161BA 9161BB 9161BC 9161BD 9161BE 9161BF 9161BG 9161BH 9161BI 9161BJ 9161BK 9161BL 9161BM 9161BN 9161BO 9161BP TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 1.1 May 16, 2006 5 G9161 Global Mixed-mode Technology Inc. Absolute Maximum Ratings Operating Conditions (Note 1) Input Voltage. . . . . . . . . . . . . . . . . . . . . . . . .2.5V ~ 5.5V Temperature Range. . . . . . . . . . . . . .-40°C ≤ TA ≤85°C Input Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7V Power Dissipation Internally Limited Maximum Junction Temperature. . . . . . . . . . . . .150°C Storage Temperature Range . . . .-65°C ≤ TJ ≤+150°C Reflow Temperature (soldering, 10sec) . . . . . .260°C Thermal Resistance Junction to Ambient, (θJA) (1) SOT-89. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153°C/W TO-252. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102°C/W SOT-223. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118°C/W SOP-8 (FD) . . . . . . . . . . . . . . . . . . . . . . . . . . 162°C/W Thermal Resistance Junction to Case, (θJc) SOT-89 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 48°C/W TO-252. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..8°C/W SOT-223. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20°C/W SOP-8 (FD) . . . . . . . . . . . . . . . . . . . . . . . . . . . 12°C/W Note (1): See Recommended Minimum Footprint. Electrical Characteristics (VIN =+3.6V, TA=TJ =+25°C, CIN=4.7µF, COUT=4.7µF, unless otherwise noted.) (Note 1) PARAMETER Input Voltage (Note 2) Output Voltage Accuracy SYMBOL CONDITION VIN VOUT MIN TYP MAX UNIT 2.5 --- 5.5 VOUT ≥2.50V, IOUT =1mA -2 --- 2 2.50V>VOUT ≥1.80V, IOUT=1mA -3 --- 3 1.80V>VOUT ≥1.20V, IOUT=1mA -4 --- 4 400 --- --- Maximum Output Current V % mA Current Limit (Note 4) ILIM 400 550 --- mA Short Circuit Current Isc --- 280 --- mA Ground Pin Current IQ --- 90 --- µA VOUT=1.20V --- 2 2.3 VOUT=1.80V --- 1.4 1.7 VOUT=2.50V --- 0.8 1 VOUT=3.30V Dropout Voltage (Note 5) Line Regulation VDROP IOUT =400mA --- 0.48 0.67 ΔVLNR SET=GND, VIN=V(STD)+0.1V,to 6.2V IOUT=10mA --- 0.06 0.12 V %/V Load Regulation ΔVLDR IOUT=10mA to 400mA --- --- Ripple Rejection PSRR F=120Hz, 0.49VP-P, IOUT=10mA --- 65 --- dB TSHDN --- 145 --- °C ΔTSHDN --- 25 --- °C 0.02 %/mA Thermal Protection Thermal Shutdown Temperature Thermal Shutdown Hysteresis Note 1: Limits is 100% production tested at TA= +25°C. Low duty pulse techniques are used during test to maintain junction temperature as close to ambient as possible. Note 2: Guaranteed by line regulation test. Note 3: Adjustable mode only. Note 4: Not tested. For design purposes, the current limit should be considered 400mA minimum to 650mA maximum. Note 5: The dropout voltage is defined as (VIN-VOUT) when VOUT is 100mV below the target value of VOUT. The performance of every G9161 part, see “Typical Performance Characteristics”. TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 1.1 May 16, 2006 6 G9161 Global Mixed-mode Technology Inc. Typical Performance Characteristics (VIN=3.6V, VOUT=1.2V, CIN=4.7µF, COUT=4.7µF, TA=25°C, unless otherwise noted.) Line Transient Response Load Transient Response Short Circuit Current Ripple Rejection 90 80 10mA PSRR (dB) 70 60 50 400mA 40 30 20 10 0 0.01 VIN=4V COUT=4.7µF VP-P=0.49V 0.1 1 10 Frequency (KHz) 100 Start-up Overcurrent Protection Characteristics TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 1.1 May 16, 2006 7 G9161 Global Mixed-mode Technology Inc. Typical Performance Characteristics (continued) SOT-89 Max. Power Dissipation vs. TAMB Max. Dissipation Power (W) SOT-89 Max. Power Dissipation vs. PCB Top Copper Area 2 2 Unit:in2 A=0.1 1.8 1.8 A=0.2 1.6 1.6 A=0.3 1.4 1.4 A=0.5 1.2 1.2 1 1 0.8 0.8 0.6 0.6 0.4 0.4 A=4.0 0.2 0.2 A=4.5 0 0 0 1 2 3 4 PCB Top Copper Area (in2) 5 A=0.4 A=1.0 A=1.5 A=2.0 A=2.5 A=3.0 A=3.5 A=5.0 25 35 45 55 65 75 85 SOT-223 Max. Power Dissipation vs. TAMB SOT-223 Max. Power Dissipation vs. PCB Top Copper Area 3 Unit:in2 3 2.5 Max. Dissipation Power (W) Max. Dissipation Power (W) A=0.2 2 1.5 1 0.5 A=0.3 2.5 A=0.4 A=0.5 2 A=1.0 A=1.5 1.5 A=2.0 A=2.5 1 A=3.0 A=3.5 0.5 A=4.0 A=4.5 A=5.0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 PCB Top Copper Area (in2) 4.5 25 5 45 55 TAMB 65 (°C) 75 85 TO-252 Max. Power Dissipation vs. TAMB TO-252 Max. Power Dissipation vs. PCB Top Copper Area 4 4 3.5 3.5 Max. Dissipation Power (W) Max. Dissipation Power (W) 35 3 2.5 2 1.5 Unit:in2 A=0.5 A=1.0 3 A=1.5 2.5 A=2.0 2 A=2.5 A=3.0 1.5 A=3.5 1 A=4.0 0.5 0.5 A=4.5 0 0 1 0.5 1 1.5 2 2.5 3 3.5 4 PCB Top Copper Area (in2) 4.5 A=5.0 25 5 35 45 55 65 75 85 TAMB (°C) TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 1.1 May 16, 2006 8 G9161 Global Mixed-mode Technology Inc. Typical Performance Characteristics (continued) SOP-8 Max. Power Dissipation vs. TAMB SOP-8 Max. Power Dissipation vs. PCB Top Copper Area 3.5 3.5 3 3 unit: in2 Max. Dissipation Power (W) Max. Dissipation Power (W) A=0.1 2.5 2 1.5 1 0.5 0 A=0.2 A=0.3 A=0.4 2.5 A=0.5 2 A=1.0 1.5 A=2.0 1 A=3.0 0.5 A=4.0 A=1.5 A=2.5 A=3.5 A=4.5 A=5.0 0 0 2 4 6 0 20 40 60 80 100 TAMB (°C) PCB Top Copper Area (in2) Output Voltage vs. IL Quiescent Current vs. Temperature 1.224 97 1.216 95 94 93 Output Voltage (V) Quiescent Current (µA) 96 VIN=4.5V/IQ 92 91 90 VIN=3.5V/IQ 89 VIN=7V 1.208 1.2 VIN=3.5V 1.192 VIN=5V 1.184 88 87 1.176 -25 -5 15 35 55 Temperature (°C) 75 0 Output Voltage vs. Temperature 400 VO=1.2V 1.208 2 Dropout Voltage (V) 1.206 Output (V) 200 300 Output Cirrent (mA) Dropout Volatge vs. IL 2.5 1.21 100 VIN=5V 1.204 1.202 1.2 1.198 VIN=3.5V 1.196 T=-25°C 1.5 T=85°C 1 T=25°C 0.5 1.194 0 1.192 -25 -5 15 35 55 0 75 Temperature (°C) 100 200 IL (mA) 300 400 TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 1.1 May 16, 2006 9 Global Mixed-mode Technology Inc. G9161 Recommended Minimum Footprint SOT-89 SOT-223 TO-252 SOP-8 (FD) Recommended Ground Layout for Power Dissipation SOP-8 (FD) TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 1.1 May 16, 2006 10 G9161 Global Mixed-mode Technology Inc. Pin Description PIN NAME TO-252 SOT-223 SOP-8 (FD) SOT-89 1 1 1 1,2 IN 2 2 2 6 GND 3 3 3 3,4 OUT 5,7,8 Thermal Pad FUNCTION Regulator Input. Supply voltage can range from +2.5V to +5.5V. Bypass with 1µF to GND Ground. This pin also functions as a heatsink. Solder to large pads or the circuit board ground plane to maximize thermal dissipation. Regulator Output. Sources up to 300mA. Bypass with a 1µF, ＜0.2Ω typical ESR capacitor to GND. NC/GND Connect to GND for heatsink. Recommend connecting the Thermal Pad to the GND for excellent power dissipation. Detailed Description Power-Supply Rejection and Operation from Sources Other than Batteries The G9161 is designed to deliver low dropout voltages and low quiescent currents in battery powered systems. Power-supply rejection is 65dB at low frequencies. As the frequency increases above 20kHz, the output capacitor is the major contributor to the rejection of power-supply noise. Over Current Protection The G9161 uses a current sense-resistor to monitor the output current. A portion of the PMOS output transistor’s current is mirrored to a resistor such that the voltage across this resistor is proportional to the output current. Once the output current exceeds limit threshold, G9161 would be protected with a limited output current. Further more, when the output is short to ground, the output current would be folded-back to a less limit. When operating from sources other than batteries, improve supply-noise rejection and transient response by increasing the values of the input and output capacitors, and using passive filtering techniques. Over Temperature Protection To prevent abnormal temperature from occurring, the G9161 has a built-in temperature monitoring circuit. When it detects the temperature is above 145°C, the output transistor is turned off. When the IC is cooled down to below 120°C, the output is turned on again. In this way, the G9161 will be protected against abnormal junction temperature during operation. Load Transient Considerations The G9161 load-transient response graphs show two components of the output response: a DC shift of the output voltage due to the different load currents, and the transient response. Typical overshoot for step changes in the load current from 10mA to 300mA is 8mV. Increasing the output capacitor's value and decreasing its ESR attenuates transient spikes. Applications Information Capacitor Selection and Regulator Stability Normally, use a 1µF capacitor on the input and a 1µF capacitor on the output of the G9161. Larger input capacitor values and lower ESR provide better supply-noise rejection and transient response. A highervalue input capacitor (10µF) may be necessary if large, fast transients are anticipated and the device is located several inches from the power source. Input-Output (Dropout) Voltage A regulator's minimum input-output voltage differential (or dropout voltage) determines the lowest usable supply voltage. In battery-powered systems, this will determine the useful end-of-life battery voltage. Because the G9161 use a P-channel MOSFET pass transistor, their dropout voltage is a function of RDS(ON) multiplied by the load current. TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 1.1 May 16, 2006 11 G9161 Global Mixed-mode Technology Inc. Package Information D D1 POLISH E HE A1 e C MATTE FINISH A b b1 b POLISH SOT-89 (T2) Package SYMBOL MIN DIMENSIONS IN MILLIMETER NOM MAX MIN DIMENSIONS IN INCH NOM MAX A 1.40 1.50 1.60 0.055 0.059 0.063 A1 b 0.80 0.36 1.04 0.42 ----0.48 0.031 0.014 0.041 0.016 ----0.018 b1 C 0.41 038 0.47 0.40 0.53 0.43 0.016 0.014 0.018 0.015 0.020 0.017 D D1 4.40 1.40 4.50 1.60 4.60 1.75 0.173 0.055 0.177 0.062 0.181 0.069 HE E ----2.40 ----2.50 4.25 2.60 ----0.094 ----0.098 0.167 0.102 e 2.90 3.00 3.10 0.114 0.118 0.122 TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 1.1 May 16, 2006 12 G9161 Global Mixed-mode Technology Inc. E A F E1 L1 H D L2 A1 L3 θ b e C e1 TO-252 (T4) Package SYMBOL MILLIMETERS INCHES MIN. MAX. MIN. MAX. A A1 2.19 0.89 2.38 1.27 0.086 0.035 0.094 0.050 b C 0.64 0.46 0.89 0.58 0.025 0.018 0.035 0.023 D E 5.97 6.35 6.22 6.73 0.235 0.250 0.245 0.265 E1 e e1 F L1 L2 5.21 5.46 0.205 3.96 0.46 0.89 0.64 5.18 0.58 2.03 1.02 0.156 0.018 0.035 0.025 0.204 0.023 0.080 0.040 L3 H 2.40 9.40 0° 2.80 10.40 4° 0.095 0.370 0° 0.110 0.410 4° θ 2.26BSC 0.215 0.09BSC TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 1.1 May 16, 2006 13 G9161 Global Mixed-mode Technology Inc. A D α B1 C 13°(4X) H E L L2 e e1 13°(4X) A1 B SOT-223 (T6) Package SYMBOL MILLIMETER INCH MIN MAX MIN MAX A 1.55 1.80 0.061 0.071 A1 0.02 0.12 0.0008 0.0047 B B1 0.60 2.90 0.80 3.10 0.024 0.114 0.031 0.122 C D E e e1 0.24 6.30 3.30 0.32 6.70 3.70 0.009 0.248 0.130 0.013 0.264 0.146 H L L2 α 6.70 2.30 BSC 4.60 BSC 0.090 BSC 0.181 BSC 7.30 0.264 0.90 MIN 0.06 BSC 0° 0.287 0.036 MIN 0.0024 BSC 10° 0° 10° TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 1.1 May 16, 2006 14 G9161 Global Mixed-mode Technology Inc. D1 E1 E H L D θ A2 A SEATING PLANE A1 e B SOP-8 (FD) Package Note: 1. JEDEC Outline: MS-012 AA/E.P. Version: N/A 2. Dimension “D” does not include mold flash, protrusions or gate burrs. Mold flash, protrusions and gate burrs shall not exceed .15mm (.006in) per side. 3. Dimensions “E” does not include inter-lead flash, or protrusions inter-lead flash and protrusions shall not exceed .25mm (.010in) per side. MIN. DIMENSION IN MM MAX. A A1 1.397 0.00 1.753 0.13 0.053 0.000 A2 B 0.330 0.508 0.013 0.020 4.801 3.810 5.004 3.988 0.189 0.150 0.197 0.157 5.791 0.508 6.198 0.711 0.228 0.020 0.244 0.028 D1 0° 3.048 8° 3.556. 0° 0.120 8° 0.140 E1 2.159 2.667 0.085 0.105 PACKAGE Q’TY/BY REEL SYMBOL D E e H L θ DIMENSION IN INCH MIN. MAX. 1.40 TYP 0.069 0.005 0.055 TYP 1.27 TYP 0.05 TYP Taping Specification Feed Direction SOT-89、223 Package Orientation Feed Direction TO-252 Package Orientation Feed Direction Typical SOP Package Orientation SOT-89 TO-252 1,000 ea 2,500 ea SOT-223 SOP-8 (FD) 2,500 ea 2,500 ea GMT Inc. does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and GMT Inc. reserves the right at any time without notice to change said circuitry and specifications. TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 1.1 May 16, 2006 15