OCXO Sine Output HCD210 Specifications Product Parameters Optional SMA/B/C/BNC/MCX RF connector 10.00 Frequency range: 5.0 ~ 100.0MHz 쮿 Ageing per day (at despatch): < ±1x10-8 < ±5x10-9 왏 쮿 Frequency stability: < ±5x10-7 per year < ±1x10-7 per 5% change in VDD < ±5x10-10 per 10% change in load 쮿 쮿 쮿 Short term stability: < ±5x10-12 over 1 sec (5.0MHz) < ±1x10-11 over 1 sec (10.0MHz) 쮿 쮿 Temperature stability: 9 15.00 PIN 50.00 15.90 A A Fixing holes M3 tapped. Penetration 5mm max. 70.00 A CONNECTION 1 Freq adjust (+ve) 2 Fine adjust 3 Freq adjust (-ve) 4 Isolated RF output 5 Isolated RF output 6 + Supply 7 DO NOT USE 8 - Supply 9 Case M N Operating temperature range: 0 to +50°C -20 to +60°C -20 to +70°C 왏 쮿 왏 A D F Storage temperature range: -40 to +90°C 쮿 Output waveform: Sine wave, 1.5V p-p ±0.5V into 50⏲ 쮿 쮿 쮿 Supply voltage (VDD): +12V (±0.5V) +15V (±0.5V) +18V (±0.5V) 쮿 왏 왏 Power consumption: 4.5W max at switch on 1.0W typ when stabilised at 25°C 쮿 쮿 Features Warm up: < ±5x10-8 after 10mins at +25°C 쮿 « « « « « Phase noise (@ 10.0MHz): < -110 dBc/Hz @ 10Hz < -130 dBc/Hz @ 100Hz < -145 dBc/Hz @ 1kHz < -150 dBc/Hz @ 10kHz < -150 dBc/Hz @ 50kHz 쮿 쮿 쮿 쮿 쮿 External connectors: D9 D9 + single SMA D9 + single SMB Other (single SMC/BNC/MCX) 쮿 왏 왏 왏 Harmonics: < -30dB wrt carrier 쮿 Shock: IEC 68-2-27 Test Ea 50G for 11ms 쮿 Vibration: IEC 68-2-06 Test Fc 10-55Hz, 1.5mm. 55-500Hz, 10G 쮿 15.90 5.90 5.90 Mechanical frequency adjustment on this face Scale 1:2 Frequencies up to 100MHz Internal multiplier above 50.0MHz Single oven & oscillator supply 12V supply standard, 15V or 18V optional Custom options available A B 왏 쮿 Frequency adjustment: ±2x10-6 (typ) over +0.5 to +6.0V (sufficient for 10 years ageing min) Stabilised +6.0V supply provided Mechanical ±5x10-7 A Option Codes < ±1x10-7 < ±5x10-8 40.00 1 HCD210 N P R D A B specify 쮿 Standard. 왏 Optional - Please specify required code(s) when ordering Ordering Information Product name + option codes (if any) + frequency eg: HCD210 10.0MHz Option code X (eg HCD210/X) denotes a custom specification. Tel: +44 1460 256 100 30 Jun 2004 Fax: +44 1460 256 101 E-mail: [email protected] Web: www.golledge.com