RL101G thru RL107G Glass Passivated Junction Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 1.0 Ampere Features Low forward voltage drop High current capability High reliability High surge current capability Φ 0.6mm leads Mechanical Data Case: Molded plastic A-405 Epoxy: UL 94V-O rate flame retardant Lead: Axial leads, solderable per MIL-STD-202, Method 208 guaranteed Polarity: Color band denotes cathode end High temperature soldering guaranteed: 250oC/10 seconds .375” (9.5mm) lead lengths at 5 lbs., (2.3kg) tension Weight: 0.008 ounce, 0.235 gram Maximum Ratings and Electrical Characteristics Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% Parameter Symbols R L 101G R L 102G R L 103G R L 104G R L 105G R L 106G R L 107G Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage V DC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length @TA=50oC I(AV) 1.0 Amp Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30.0 Amps Maximum instantaneous forward voltage @ 1.0A DC VF 1.1 Volts uA pF Maximum DC reverse current at rated DC blocking voltage @TA=25oC @TA=125oC IR 5.0 100 Typical junction capacitance (Note 1) CJ 10 Operating junction temperature range TJ -55 to +150 o C TSTG -55 to +150 o C Storage temperature range Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C. 17 RATINGS AND CHARACTERISTIC CURVES 18