GTM GL9563

Pb Free Plating Product
ISSUED DATE :2005/11/03
REVISED DATE :
GL9563
BVDSS
RDS(ON)
ID
P-CHANNEL ENHANCEMENT MODE POWER MOSFET
-40V
40m
-6A
Description
The GL9563 provide the designer with the best combination of fast switching, ruggedized device design, low
on-resistance and cost-effectiveness.
The SOT-223 package is universally preferred for all commercial-industrial surface mount applications and
suited for low voltage application such as DC/DC converters.
Features
*Simple Drive Requirement
*Lower On-resistance
*Fast Switching Characteristic
Package Dimensions
SOT-223
REF.
A
C
D
E
I
H
Millimeter
Min.
Max.
6.70
7.30
2.90
3.10
0.02
0.10
0°
10°
0.60
0.80
0.25
0.35
REF.
B
J
1
2
3
4
5
Millimeter
Min.
Max.
13°TYP.
2.30 REF.
6.30
6.70
6.30
6.70
3.30
3.70
3.30
3.70
1.40
1.80
Absolute Maximum Ratings
Parameter
Drain-Source Voltage
Gate-Source Voltage
Symbol
Ratings
Unit
VDS
-40
V
VGS
±25
V
Continuous Drain Current
3
ID @TA=25
-6
A
Continuous Drain Current
3
ID @TA=70
-4.8
A
-30
A
2.7
W
Pulsed Drain Current
1
IDM
Total Power Dissipation
PD @TA=25
Linear Derating Factor
0.02
Operating Junction and Storage Temperature Range
Tj, Tstg
-55 ~ +150
Symbol
Value
Rthj-a
50
W/
Thermal Data
Parameter
Thermal Resistance Junction-ambient
GL9563
3
Max.
Unit
/W
Page: 1/4
ISSUED DATE :2005/11/03
REVISED DATE :
Electrical Characteristics (Tj = 25
Parameter
unless otherwise specified)
Symbol
Min.
Typ.
Max.
Unit
Drain-Source Breakdown Voltage
BVDSS
-40
-
-
V
Breakdown Voltage Temperature Coefficient
BVDSS / Tj
-
-0.03
-
Gate Threshold Voltage
VGS(th)
-1.0
-
-3.0
V
VDS=VGS, ID=-250uA
gfs
-
10
-
S
VDS=-10V, ID=-6A
IGSS
-
-
±100
nA
VGS= ±25V
-
-
-1
uA
VDS=-40V, VGS=0
-
-
-25
uA
VDS=-32V, VGS=0
-
-
40
-
-
60
Forward Transconductance
Gate-Source Leakage Current
Drain-Source Leakage Current(Tj=25 )
Drain-Source Leakage Current(Tj=70 )
Static Drain-Source On-Resistance2
IDSS
RDS(ON)
V/
m
Test Conditions
VGS=0, ID=-250uA
Reference to 25 , ID=-1mA
VGS=-10V, ID=-6A
VGS=-4.5V, ID=-4A
Total Gate Charge2
Qg
-
19
30
Gate-Source Charge
Qgs
-
5
-
Gate-Drain (“Miller”) Change
Qgd
-
8
-
Td(on)
-
12
-
Tr
-
7
-
Td(off)
-
68
-
Tf
-
38
-
Input Capacitance
Ciss
-
1600
2560
Output Capacitance
Coss
-
240
-
Reverse Transfer Capacitance
Crss
-
190
-
Symbol
Min.
Typ.
Max.
Unit
VSD
-
-
-1.2
V
IS=-2A, VGS=0V
Reverse Recovery Time
Trr
-
37
-
ns
Reverse Recovery Charge
Qrr
-
54
-
nC
IS=-6A, VGS=0V
dI/dt=100A/ s
Turn-on Delay Time2
Rise Time
Turn-off Delay Time
Fall Time
nC
ID=-6A
VDS=-32V
VGS=-4.5V
ns
VDS=-20V
ID=-1A
VGS=-10V
RG=3.3
RD=20
pF
VGS=0V
VDS=-25V
f=1.0MHz
Source-Drain Diode
Parameter
2
Forward On Voltage
2
Test Conditions
Notes: 1. Pulse width limited by Max. junction temperature.
2. Pulse width 300us, duty cycle 2%.
3. Surface mounted on 1 in2 copper pad of FR4 board; 120 /W when mounted on Min. copper pad.
GL9563
Page: 2/4
ISSUED DATE :2005/11/03
REVISED DATE :
Characteristics Curve
Fig 1. Typical Output Characteristics
Fig 3. On-Resistance v.s. Gate Voltage
Fig 5. Forward Characteristics of
Reverse Diode
GL9563
Fig 2. Typical Output Characteristics
Fig 4. Normalized On-Resistance
v.s. Junction Temperature
Fig 6. Gate Threshold Voltage v.s.
Junction Temperature
Page: 3/4
ISSUED DATE :2005/11/03
REVISED DATE :
Fig 7. Gate Charge Characteristics
Fig 8. Typical Capacitance Characteristics
120
Fig 9. Maximum Safe Operating Area
Fig 11. Switching Time Waveform
/W
Fig 10. Effective Transient Thermal Impedance
Fig 12. Gate Charge Waveform
Important Notice:
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM.
GTM reserves the right to make changes to its products without notice.
GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems.
GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance.
Head Office And Factory:
Taiwan: No. 17-1 Tatung Rd. Fu Kou Hsin-Chu Industrial Park, Hsin-Chu, Taiwan, R. O. C.
TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785
China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China
TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165
GL9563
Page: 4/4