HAMAMATSU C9004_06

MODULE
Driver circuit for Si photodiode array
C9004
Driver circuit for 16-element photodiode array
Features
Applications
lHigh precision and high-speed measurement by
simultaneous 16-channel readout
lAssembled with pulse generator (8-step adjustable
oscillatory frequency)
CLK, START, A/D conversion Trig and EOS pulse output
lChoice of gain (conversion impedance): 1 × 106 or 1 × 107 (V/A)
lHamamatsu S4111-16 series, S5668 series photodiode
arrays are directly mountable on board.
lSingle power supply operation: +12 V
lPerformance evaluation of Hamamatsu S4111-16 series,
S5668 series photodiode arrays
lPosition measurement
lDisplacement measurement
■ Absolute maximum ratings
Parameter
Supply voltage
Input current
Operating temperature
Storage temperature
Symbol
Vcc Max.
Iin Max.
Topr
Tstg
Value
+18
+6.7 × 10-5
0 to +50
-20 to +80
Unit
V
A
°C
°C
■ Electrical and optical characteristics (Ta=25 °C)
Parameter
Symbol
Input current range
Iin
Conversion impedance *1
Tz
Output offset voltage
Output amplitude voltage
Output noise voltage
Rise time
Vos
Vo
enp-p
tr
Condition
Tz=1 × 106
Tz=1 × 107
Tz=1 × 106
(set up prior to shipping)
Tz=1 × 107 *2
Tz=1 × 106, RL=1 kΩ
Tz=1 × 107, RL=1 kΩ
Tz=1 × 106
(full bandwidth)
Tz=1 × 107
(full bandwidth)
Tz=1 × 106, RL=1 kΩ
Tz=1 × 107, RL=1 kΩ
Min.
1 × 106
Typ.
-
Max.
1 × 10-5
1 × 10-6
1 × 107
Unit
A
A
V/A
-
0.025
-
V
0
0
0.25
-
+10
+10
V
V
V
-
5
-
mVp-p
-
10
-
mVp-p
1.5625
5
5.6
5.6
TTL
200
100
200
640
µs
µs
pF
kHz
µs
mA
Capacitive load
CL
Oscillatory frequency (OUT) *3
CLK
Start pulse width (OUT) *3
Output format *4
Current consumption
Icc
*1: Conversion impedance can be changed with the switch on the circuit board.
*2: The variable resistor VR on the circuit board must be used for making offset adjustments.
*3: Adjustable in 8 steps by using the BCD rotary switch on the circuit board.
*4: CLK, START, Trig and EOS pulse output format.
250
1
Driver circuit for Si photodiode array
C9004
■ Block diagram
16-ELEMENT
PHOTODIODE
CURRENT-VOLTAGE
CONVERSION AMP
5 × 10
5
DC-DC CONVERTER
TIMING GENERATOR
· · · · · · · ·
· · · · · · · ·
S4111-16
S5668
OSCILLATOR
S/H
× 16 ch
+12 V
GND
EOS
Trig
START
CLK
JP
MUX
SW
GND
Vout
BUFFER
×2 or ×20
KACCC0181EB
■ Timing chart
360 µs MIN.
5 µs MIN.
CLK
START
(S/H)
(Reset)
5 µs MIN.
Trig.
EOS
Signal out
KACCC0182EA
■ Dimensional outline (unit: mm)
Photodiode array mount side
Back side
(27 ×) 0.8TH
(4 ×) R3
P2.54 × 8
7.62
4.5 MAX.
PHOTODIODE ARRAY
MOUNT POSITION
15.24
3.2 (THRU HOLE)
9.94
(4 ×)
89.0
95.0
8.0
BCD SWITCH
CN
6 LAND PATTERN FOR GND
64.0
1.6
12.5 MAX.
DC JACK
FOR AC ADAPTER
70.0
NOTE) Photodiode array sold separately
KACCA0117EB
■ Accessories
· Dedicated AC adapter
· Flat cable (20 cm) with I/O connector receptacle
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2006 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
2
Cat. No. KACC1081E02
Mar. 2006 DN