PHOTO IC Transmitter/Receiver photo IC for optical link L10063-01, S10064-01 For MOST automotive network, 50 Mbps band POF communications L10063-01 and S10064-01 are transmitter and receiver photo ICs developed for MOST (Media Oriented System Transport) networks used in vehicles to communicate multimedia information. The transmitter photo IC L10063-01 consists of a red LED and driver IC incorporated into a clear plastic package and can be set to an operating mode that reduces the optical output level by half. The receiver photo IC S10064-01 is a monolithic photo IC fabricated by the PiN-BiP process and features a wide dynamic range. It also has a low power consumption "sleeping mode" and an optical wakeup mode triggered by input of light. Both the transmitter and receiver photo IC input or output digital signals through a TTL interface. Features Applications lOnly for vehicle networks (MOST) L10063-01 lWide operating temperature range: -40 to +105 ˚C lDC to 50 Mbps data communications lTTL input lOptical output 50 % cut mode MOST compliant products Specifications of these products are subject to change without prior notice to keep up with changes in the MOST standard. S10064-01 lWide operating temperature range: -40 to +105 ˚C l4 M to 50 Mbps data communications lMonolithic structure immune from external noise lTTL output lWide dynamic range lSleeping mode with optical wakeup ■ A bsolu te m axim um ratings * 1 (Ta= -40 to +105 °C ) P a ram ete r S u pp ly vo ltag e O p e rating tem pe ra tu re S to ra ge tem p era tu re S o ld e rin g S ym b ol V cc To pr Tstg Tso l L 10 0 63 -01 , S 10 064 -01 -0 .5 to + 7.0 -4 0 to +1 0 5 -4 0 to +1 2 0 2 60 °C , 5 s, 3 tim es, a t lea st 2 .5 m m a w ay fro m lea d root U nit V °C °C - S10064-01 ■ E le ctrica l a nd o ptica l ch a rac teris tic s (Ta = -40 to +1 0 5 °C , V c c= 4 .75 to 5 .25 V * 1 ) P a ram ete r S ym b ol C on d itio n M in. Typ. M a x. U nit C urre n t c o n s u m p tion 2 30 mA Ic c o * (o pe ra tion m od e ) C urre n t c o n s u m p tion (sle ep in g m od e ) Ic cs D a rk s ta te 20 µA R ec e iver le ve l P o pt3 B i-ph as e s ign a l -2 5 -2 dBm H ig h leve l o utp ut voltage Vo h Io h = -15 0 µ m 2 .5 V c c + 0 .3 V L ow le vel o u tpu t vo lta ge Vo l Io l= 1 .6 m A 0 0 .4 V Vo u t R is e tim e tr 9 1 0 to 9 0 % * 2 , * 3 ns F a ll tim e tf 7 P u ls e w idth va ria tio n tp w v *2, *3, *4, *6 1 7.9 2 9.79 ns P u ls e w id th d is tortio n (a vera g e value ) ta p w d *2, *3, *4, *6 -2 .6 9 + 6.4 9 ns O p eration to sleeping m o d e transitio n receiv able lev el Psl *2, *5 -3 9 -2 5.5 dBm Slee pin g m o de to operation tran sitio n rec eiva bl e level Pop H ig h le vel vo ltage Vm h Im h = -2 0 µ A 4 .0 V M o de o utpu t L ow le vel vo lta ge Vm l Im l= 0.88 m A 0 .5 V *1: A by pa ss c a p ac itor (0.1 µ F ) is co nne c te d be tw ee n V cc an d G N D a t a p o sition w ith in 3 m m from the le ad , an d a 1 0 µ F c a p a c ito r is a ls o c o n n ec ted to th e p o w e r su p p ly lin e n ea rb y. Th e ce nter of the op tical fibe r is a lig ned w ith th e ce n te r o f the p acka g e le n s. Th e d is tan ce b etw ee n th e fib er en d a n d th e le ns top is 0 .1 m m . *2: M e as u re d w ith inp ut s ign a ls c on form in g to S P 3 M O S T s p e cific a tio n of p hy sic al laye r R e v 1 .1 A dd en dum B . *3: M e a s u re d w ith R L = 50 kΩ , C L = 15 p F (inclu din g p aras itic c a pa c ita nc e s u ch as p robe , c o n ne cto r and e valu a tion c irc uit b o ard p atte rn), a nd thres ho ld volta ge 1.5 V. *4: A n o ptica l in put w a ve fo rm is g ene ra te d w ith a H am am ats u s ta nd a rd tra nsm itte r. *5: A ve ra ge o p tic al o utp ut is m ea s ure d w ith a P O F (N A =0 .5 ). *6: M e as u re d w ith B iP ha s e P R B S a t 45 .2 M b p s (N R Z s ig na l co nve rs ion). N ote) • If m odu late d light a t 4 M b ps or less (in c lud ing D C lig h t an d n o lig ht inp u t) is in p ut to S 10 06 4 -01 , th e h ig h and lo w leve ls c a n n o t b e d is c e rn e d. 1 Transmitter/receiver photo IC for optical link L10063-01, S10064-01 ■ Output waveform example ■ Mode output waveform INPUT SIGNAL DATA NO INPUT SIGNAL OPTICAL INPUT tso tos Vmh MODE OUTPUT Vml Voh OUTPUT DATA Vol OUTPUT VOLTAGE Vertical axis: 1 V/div., Horizontal axis: 5 ns/div. (Ta=25 °C, Vcc=5.25 V, Pi= -26 dBm, RL=50 kΩ, CL=15 pF, 45.2 Mbps) KPICC0095EA L10063-01 ■ Electrical and optical characteristics (Ta= -40 to +105 °C, Vcc= 4.75 to 5.25 V *7) Parameter Symbol Condition Min. Typ. Max. Unit Current consumption Icc Vin= 2.0 V, Rcont=13.5 kΩ 40 mA Peak emission wavelength 630 650 670 nm λp Spectral half width (FWHM) 20 30 nm ∆λ Fiber coupled optical output 1 Po1 Rcont=13.5 kΩ *8, *9 -9 -2 dBm Fiber coupled optical output 2 Po2 Rcont=27 kΩ *8, *9 -12.5 -4.5 dBm Extinction ratio re 10 dB Rise time at pulse drive tr 20 to 80 % *8 6.0 ns Fall time at pulse drive tf 80 to 20 % *8 6.0 ns Pulse width variation tpwv 50 % *8, *10 19.99 24.29 ns Pulse width distortion (average value) tapwd 50 % *8, *10 -1.39 +1.39 ns *7: A bypass capacitor (0.1 µF) connected between Vcc and GND at a position within 3 mm from the lead, and a 10 µF capacitor is also connected to the power supply line nearby. The center of the optical fiber is aligned with the center of the package lens. The distance between the fiber end and the lens top is 0.1 mm. *8: Measured with input signals conforming to SP1 MOST specification of physical layer Rev 1.1 Addendum B. *9: Average value measured with a plastic fiber (φ1 mm, SI-POF, NA=0.5, 1 m) made by Mitsubishi Rayon. *10: Measured with BiPhase PRBS at 45.2 Mbps (NRZ signal conversion). ■ Dimensional outlines (unit: mm) S10064-01 8.98 ± 0.2 (INCLUDING BURR) 7.2 ± 0.2 (INCLUDING BURR) 2.54 2.54 2.54 2.94 2.45 a’ a’ 1.07 1.27 (4 ×) 0.5 ± 0.05 2.54 2.54 2.54 0.23 (2 ×) 5˚ 2.0 DEPTH 0.15 MAX. (4 ×) 0.25 ± 0.05 (SPECIFIED AT THE LEAD ROOT) 1.8 2.92 1.24 (SPECIFIED AT THE LEAD ROOT) 0.97 0.6 1.50 3.7 ± 0.05 2.03 (2 ×) d = 0.8 ± 0.05 (2 ×) 10˚ 5.9 ± 0.2 (INCLUDING BURR) 5.1 (4 ×) 0.5 ± 0.05 (18.0) 2.45 a a’ 1.07 1.27 5.1 EMITTING POINT 1.57 5.92 0.66 2.03 ACTIVE AREA (18.0) 2.94 5.9 ± 0.2 (INCLUDING BURR) 5.92 0.2 3.7 ± 0.05 (2 ×) d = 0.8 ± 0.05 2.72 7.2 ± 0.2 (INCLUDING BURR) 2.85 8.98 ± 0.2 (INCLUDING BURR) (2 ×) 10˚ L10063-01 0.05 0.05 +- 0.03 a-a’ CROSS SECTION Tolerance unless otherwise noted: ±0.1, ±2˚ R0.3 MAX. Values in parentheses indicate reference value. Lead surface finish: Pd plating Shaded area indicates burr. Pin No. L10063-01 S10064-01 VIN Vcc GND GND Vcc MODEOUT Cont Vout KPICA0067EA Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2007 Hamamatsu Photonics K.K. HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 2 Cat. No. KPIC1065E01 May 2007 DN