HDM 240GS16-2 3.6” 240 X 160 Dots Graphic Dimensional Drawing 0.01 0.31 0.31 0.01 A DETAIL Dimension tolerance: +/-0.3mm Features Backlight................................................................................EL Options..........................................positive STN or FSTN (B/W) Anti-glare Polarizer, Extended Temperature Bottom/Top Viewing Analog Touch Panel Built-in Controller...............................................................None Physical Data Module Size...........................................101W x 67H x 5.3T mm Viewing Area Size...........................................81W x 55.4H mm Dot Pitch.......................................................0.32W x 0.32H mm Dot Size........................................................0.31W x 0.31H mm Weight..................................................................................30g Power Supply Q1 : 2SC1815 OP-AMP : LP324 R1=R2=R4=R5=10KΩ R3=9R1=91KΩ (1/13 Bias) C1=0.1uF, C2~C6=3.3uF Absolute Maximum Ratings PARAMETER SUPPLY VOLTAGE SYMBOL MIN MAX 6.5 UNIT VDD-VSS -0.3 V POWER SUPPLY FOR LCD VEE-VSS 0 27.0 V INPUT VOLTAGE VIN 0 6.5 V OPERATING TEMPERATURE TOP -20 70 °C STORAGE TEMPERATURE TSTG -30 80 °C Electrical Characteristics (VDD=3.3±10% 25°C) TYP MAX UNIT OPERATING VOLTAGE PARAMETER VDD SYM - CONDITION 2.97 3.3 3.63 V POWER SUPPLY FOR LCD VEE-VSS - 18.9 19.2 19.5 V INPUT HIGH VOLTAGE VIH - .8VDD VDD V INPUT LOW VOLTAGE VIL - 0 .2VDD V POWER SUPPLY CURRENT IDD - - 0.09 0.5 mA IEE - - 1.8 3 mA DRIVE METHOD MIN 1/160 Duty Pin Connections PIN NO. SYMBOL 1 V5 FUNCTION Bias Voltage for non-select (Common Driver) 2 V2 3 VEE - Power supply voltage for LCD Bias Voltage for non-select (Common Driver) 4 VDD 3.3V Power supply for logic 5 FRAME H/L Frame signal (Data signal of the shift register of the common driver) 6 VGND - GND, Power supply voltage for LCD 7 LOAD H/L 1) Display data latch 2) Shift clock for common driver 0V Ground 8 VSS 9 DF 10 DISPOFF L 11 CP H/H→L 12 V4 switch signal to convert LCD drive waveform into AC Display off clock pluse for segment shift register Bias Voltage for non-select (Segment Driver) 13 V3 14 DB3 H/L 15 DB2 H/L 16 DB1 H/L 17 DB0 H/L 18 N/C - No connection 19 EL1 - Power supply for EL backlight 20 EL2 - Power supply for EL backlight Page 26 Bias Voltage for non-select (Segment Driver) Data bus