HDM6448TS-S 640 X 480 7.4” VGA Monochrome, with Touch Screen Dimensional Drawing CONNECTOR INFORMATION: LCD DISPLAY: 53261-1590 (MOLEX) MATING: 51021-1500 (MOLEX) or 1.25mm Pitch, 15 PIN FFC/FPC for solder 205.5 98.5 0.5 189.5±0.4 104.5 200.0±0.5 2-R1.5 151.0x113.4 Viewing Area 1 TOUCH SCREEN DISPLAY: 65801-004 (BERG) MATING: 69167-104 (BERG) 147.18x110.38 Active Area 153.0 Bezel Opening 2 4 A A’ 1 Dimension tolerance: +/-0.3mm 0.21 0.02 MOLDER 7.0 MAX 2.4 157.5 Touch Screen (Viewing Area) 76.0±3 Ø3.0±0.2 (Bezel Hole) 4.1±0.4 95.0 0.21 15 8.0 BEZEL 115.4 Bezel Opening 105.0±0.4 1 Ø6.5 (Molder Hole) 30.0±15 A-A’ SECTION NOTE: Available with either positive Vee (“P” version) or negative Vee (“N” version) Features Features Backlight.........................................................................CCFL Options................................................Black and White FSTN Built-in Controller.............................................................None Absolute Maximum Ratings Physical Data Module Size................................205.5W x 141.0H x 7.0T mm Viewing Area Size..................................151.0W x 113.4H mm Dot Pitch....................................................0.23W x 0.23H mm Dot Size.....................................................0.21W x 0.21H mm Weight..............................................................................310g SUPPLY VOLTAGE FOR LCD PARAMETER SYMBOL SUPPLY VOLTAGE VDD-VSS MIN -0.3 MAX V V VDD - VEE (N) 0 27.0 VEE- VSS (P) 0 27.0 INPUT VOLTAGE VIN -0.3 VDD+0.3 V OPERATING TEMPERATURE TOP 0 50 °C STORAGE TEMPERATURE TSTG -20 70 °C HUMIDITY (NO CONDENSATION) - 10 85 %RH Pin Connections VDD + L C M PIN NO. 5V VLCD VEE “N” version RL + 27V + 22V RH+RL = 10 ~ 20KΩ Electrical Characteristics (VDD=5.0±0.25V 25°C) PARAMETER LEVEL FUNCTION 1 FP H First Line Marker 2 LP H/L Data Latch 3 SCP H/L Shift clock 4 DISPOFF H/L H=On, L=Off 5 VDD 5V Power supply for logic 6 VSS 0V Ground 7 VEE - Operating voltage for LC 8 UD0 H/L Upper screen data input 9 UD1 H/L Upper screen data input 10 UD2 H/L Upper screen data input 11 UD3 H/L Upper screen data input 12 LD0 H/L Lower screen data input 13 LD1 H/L Lower screen data input CONDITION MIN TYP MAX UNIT VDD - 4.75 5.0 5.25 V VEE (N) VDD - VEE 22.3 22.8 23.3 V VEE (P) VEE- VSS 21.3 22.7 23.1 V IDD (N) VDD=5.0V - 12.0 - mA IEE (N) VEE=-17.0V - 5.0 - mA 14 LD2 H/L Lower screen data input IDD (P) VDD=5.0V 2.0 4.0 mA 15 LD3 H/L Lower screen data input IEE (P) VEE=+22.7V 6.8 13.0 mA INPUT HIGH VOLTAGE VIH - 4.5 - VDD V 1 VFL - INPUT LOW VOLTAGE VIL - 0.3 - 0.5 V 2&3 NC - No Connection CCFL OP. VOLTAGE VFL IFL=5mArms 200 350 600 Vrms 4 VFLG - Ground CCFL OP. CURRENT IFL VFL=360V 3.0 5.0 6.0 mA CCFL START VOLTAGE VFLS Ta=0°C 900 - - Vrms 1 Y+ - Top Direction CCFL FREQUENCY fFL - 20 - - kHz 2 Y- - Bottom Direction FRAME FREQUENCY fFP - 65 72 80 Hz 3 X- - Left Direction 4 X+ - Right Direction SUPPLY VOLTAGE POWER SUPPLY CURRENT DRIVE METHOD SYM SYMBOL DATA CONNECTOR VSS 1/240 DUTY UNIT 6.5 Power Supply RH 2.3±0.4 39.9±1.0 CCFL DISPLAY: M63M83-04 (MITSUMI) MATING: M60-04-30-114P (MITSUMI) 4 119.4 Touch Screen (Viewing Area) 2-Ø3.0±0.2 102.0±0.5 2.0 0.02 10.05 4.5 1 141.0 3 2.3±0.4 106.5 CCFL CONNECTOR Power supply for CCFL TOUCH SCREEN CONNECTOR Page 37