HMC346G8 v01.0304 ATTENUATORS - SMT 6 GaAs MMIC HERMETIC SMT VOLTAGEVARIABLE ATTENUATOR, DC - 8 GHz Typical Applications Features The HMC346G8 is ideal for: Wide Bandwidth: DC - 8 GHz • Basestation Infrastructure Low Phase Shift vs. Attenuation • Fiber Optics & Broadband Telecom 30 dB Attenuation Range • Microwave Radio & VSAT 8 Lead Hermetic SMT Package • Military Radios, Radar, & ECM • Test Instrumentation General Description Functional Diagram The HMC346G8 is an absorptive Voltage Variable Attenuator (VVA) in an 8 lead glass/metal (hermetic) surface-mount package operating from DC - 8 GHz. It features an on-chip reference attenuator for use with an external op-amp to provide simple single voltage attenuation control, 0 to -3V. The device is ideal in designs where an analog DC control signal must control RF signal levels over a 30 dB amplitude range. Applications include AGC circuits and temperature compensation of multiple gain stages in microwave radios and test instrumentation. Electrical Specifications, TA = +25° C, 50 ohm system Parameter Insertion Loss Attenuation Range DC - 8 GHz Return Loss DC - 8 GHz Switching Characteristics 6 - 84 Min DC - 6 GHz DC - 8 GHz tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) Input Power for 0.25 dB Compression (0.5 - 8 GHz) Min. Atten. Atten. >2 dB Input Third Order Intercept (0.5 - 8 GHz) (Two-tone Input Power = -8 dBm Each Tone) Min. Atten. Atten. >2 dB 7 Typical Max Units 2.0 2.0 3.0 3.5 dB dB 30 dB 10 dB 2 8 ns ns +8 -2 dBm dBm +25 +10 dBm dBm For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC346G8 v01.0304 GaAs MMIC HERMETIC SMT VOLTAGEVARIABLE ATTENUATOR, DC - 8 GHz Relative Attenuation, Control Voltage Optimized for 4 GHz Operation Insertion Loss vs. Temperature 0 6 0 -5 -2 -3 + 25C - 40C + 85C -4 -10 -15 -20 -25 -30 -35 -5 -40 0 1 2 3 4 5 FREQUENCY 6 7 8 0 1 2 3 4 5 FREQUENCY (GHz) 6 7 8 Relative Attenuation, Control Voltage Optimized for 8 GHz Operation Return Loss vs. Attenuation 0 0 ATTENUATION (dB) RETURN LOSS (dB) -5 -5 -10 -15 -10 -15 -20 -25 -30 -20 5 dB 10 dB 15 dB 20 dB 25 dB 30 dB -35 -40 -25 0 1 2 3 4 5 6 7 FREQUENCY (GHz) 8 9 0 10 Relative Attenuation vs. Control Voltage @ 4 GHz 1 2 3 4 5 FREQUENCY (GHz) 6 7 8 Relative Attenuation vs. Control Voltage @ 8 GHz 0 0 V1 + 25C V2 + 25C V1 - 40C V2 - 40C V1 + 85C V2 + 85C -0.5 -1 CONTROL VOLTAGE (Vdc) CONTROL VOLTAGE (Vdc) ATTENUATORS - SMT ATTENUATION (dB) INSERTION LOSS (dB) -1 -1.5 -2 -2.5 -3 V1 + 25C V2 + 25C V1 - 40C V2 - 40C V1 + 85C V2 + 85C -0.5 -1 -1.5 -2 -2.5 -3 0 5 10 15 20 RELATIVE ATTENUATION (dB) 25 30 0 5 10 15 20 25 30 RELATIVE ATTENUATION (dB) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 6 - 85 HMC346G8 v01.0304 GaAs MMIC HERMETIC SMT VOLTAGEVARIABLE ATTENUATOR, DC - 8 GHz Input Third Order Intercept vs. Attenuation* Relative Phase RELATIVE PHASE (DEG) THIRD ORDER INTERCEPT POINT (dBm) 5 dB 10 dB 15 dB 20 dB 25 dB 30 dB 50 40 30 20 10 0 0 1 2 3 4 5 FREQUENCY (GHz) 6 7 30 25 0 dB 3 dB 6 dB 10 dB 20 15 10 5 8 0 1 2 4 5 6 60 70 SECOND HARMONIC (dBc) 80 50 40 30 0 dB 3 dB 6 dB 10 dB 20 8 7 8 60 50 40 0 dB 3 dB 30 6 dB 10 dB 20 0 1 2 3 4 5 6 7 8 0 1 2 FREQUENCY (GHz) 3 4 5 6 FREQUENCY (GHz) 1 dB Compression vs. Attenuation 0.25 dB Compression vs. Attenuation 20 20 0 dB (REF) 5 dB 15 INPUT P1dB (dBm) 15 10 5 0 10 5 0 dB (REF) 5 dB 0 -5 -5 0 1 2 3 4 5 6 FREQUENCY (GHz) 7 8 0 1 2 3 4 5 6 FREQUENCY (GHz) *Two-tone input power = -8 dBm each tone. 6 - 86 7 Second Harmonic vs. Attenuation 70 10 INPUT.25dB COMPRESSION (dBm) 3 FREQUENCY (GHz) Input Second Order Intercept vs. Attenuation* SECOND ORDER INTERCEPT POINT (dBm) ATTENUATORS - SMT 6 60 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 8 HMC346G8 v01.0304 GaAs MMIC HERMETIC SMT VOLTAGEVARIABLE ATTENUATOR, DC - 8 GHz Absolute Maximum Ratings +18 dBm Control Voltage Range +1.0 to -5.0 Vdc Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing 6 ATTENUATORS - SMT RF Input Power NOTES: 1. PACKAGE MATERIAL: ALUMINA LOADED BOROSILICATE GLASS. 2. LEAD, BASE, COVER MATERIAL: KOVAR™ (#7052 CORNING). 3. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER ELECTROLYTIC NICKEL 50 MICROINCHES MIN. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. TOLERANCES: ±.005 [0.13] UNLESS OTHERWISE SPECIFIED. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 6 - 87 HMC346G8 v01.0304 GaAs MMIC HERMETIC SMT VOLTAGEVARIABLE ATTENUATOR, DC - 8 GHz Pin Descriptions ATTENUATORS - SMT 6 Pin Number Function Description 1, 8 RF1, RF2 This pin is DC coupled and matched to 50 Ohm. Blocking capacitors are required if RF line potential is not equal to 0V. 2, 7 GND This pin must be DC grounded. 3, 6 V2, V1 Control Input (Master). 4 I Control Input (Slave). 5 O This pin must have an external 500 Ohm resistor to ground. Interface Schematic Single-Line Control Driver Note: External op-amp control circuit maintains impedance match while attenuation is varied. Input control ranges from 0 Volts (min. attenuation) to -2.5 Volts (max. attenuation.) 6 - 88 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC346G8 v01.0304 GaAs MMIC HERMETIC SMT VOLTAGEVARIABLE ATTENUATOR, DC - 8 GHz Evaluation PCB ATTENUATORS - SMT 6 List of Materials for Evaluation PCB 104095 Item Description J1 - J2 PCB Mount SMA RF Connector J3 - J7 DC PIN U1 HMC346G8 PCB [2] 104093-2 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 [1] The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF ports should be 50 ohm impedance and the package ground leads and package bottom should be connected directly to the PCB RF ground plane, similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 6 - 89