HMC-C010 v00.0505 PHASE SHIFTERS - CONNECTORIZED MODULES 9 9 - 80 600° ANALOG PHASE SHIFTER MODULE, 6 - 15 GHz Features Wide Bandwidth: 6 - 15 GHz >600° Phase Shift Single Positive Voltage Control Hermetically Sealed Module Field Replaceable SMA Connectors -55 to +85 °C Operating Temperature Typical Applications General Description The HMC-C010 is ideal for: The HMC-C010 is an Analog Phase Shifter which is controlled via an analog control voltage from 0 to +5V. The HMC-C010 provides a continuously variable phase shift of 0 to 800 degrees at 6 GHz, and 0 to 450 degrees at 16 GHz, with consistent insertion loss versus phase shift. The phase shift is monotonic with respect to control voltage. The control port has a modulation bandwidth of 50 MHz. The low insertion loss and extremely robust packaging enable this part to be used in a wide range of applications including the phase adjustment of clocks in fiber optic systems and test equipment. The HMC-C010 is housed in a miniature hermetic module with replaceable SMA connectors. • Fiber Optics • Military • Test Equipment Functional Diagram Electrical Specifications, TA = +25° C, 50 Ohm System Parameter Frequency (GHz) Min. Typ. Phase Shift Range: 6 - 10 GHz 10 - 15 GHz 600 360 800 600 Insertion Loss 6 - 15 GHz 7 Max. Units degrees degrees 10 dB Return Loss (Input and Output) 6 - 15 GHz 7 dB Control Voltage Range 6 - 15 GHz 0-5 Volt Modulation Bandwidth 6 - 15 GHz 50 MHz Phase Voltage Sensitivity 6 - 15 GHz 120 deg /Volt Insertion Phase Temperature Sensitivity 6 - 15 GHz 0.5 deg /°C For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC-C010 v00.0505 600° ANALOG PHASE SHIFTER MODULE, 6 - 15 GHz INSERTION LOSS (dB) +25C +85C -55C -3 -4 -5 -6 -7 -8 -9 -10 900 800 6 GHz 11 Ghz 15 GHz 700 600 500 400 300 200 100 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 0 5 0.5 1 1.5 2 Vctl (Vdc) 0 800 -2 700 -4 600 500 +25C +85C -55C 300 200 3.5 4 4.5 5 15 16 -6 -8 -10 0V 1V 2V 3V 4V 5V -12 -14 -16 100 -18 -20 0 5 6 7 8 9 10 11 12 13 14 15 5 16 6 7 8 9 10 11 12 13 14 FREQUENCY (GHz) FREQUENCY (GHz) Input Return Loss vs. Frequency, Vctl = 0 to +5V Output Return Loss vs. Frequency, Vctl = 0 to +5V 0 0 -5 -5 RETURN LOSS (dB) RETURN LOSS (dB) 3 Insertion Loss vs. Frequency 900 INSERTION LOSS (dB) NORMALIZED PHASE SHIFT (degrees) Phase Shift vs. Frequency @ Vctl = 5V (Relative to Vctl = 0V) 400 2.5 Vctl (Vdc) -10 -15 -20 PHASE SHIFTERS - CONNECTORIZED MODULES NORMALIZED PHASE SHIFT (degrees) 0 -1 -2 9 Phase Shift vs. Control Voltage Insertion Loss vs. Control Voltage -10 -15 -20 5 6 7 8 9 10 11 12 FREQUENCY (GHz) 13 14 15 16 5 6 7 8 9 10 11 12 13 14 15 16 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 81 HMC-C010 v00.0505 9 600° ANALOG PHASE SHIFTER MODULE, 6 - 15 GHz Second Harmonics vs. Control Voltage, Pin = -10 dBm Input IP3 vs. Control Voltage 35 30 70 INPUT IP3 (dBm) 2nd HARMONICS (dBc) 80 60 50 40 30 20 6 GHz 11 GHz 15 Ghz 10 20 15 10 6 GHz 11 GHz 15 Ghz 0 0 1 2 3 4 0 5 1 2 Vctl (Vdc) 0 -1 -1 0V 2V 5V -3 -4 -5 -6 -7 -8 -2 0V 2V 5V -3 -4 -5 -6 -7 -9 -10 -10 -5 0 5 10 15 20 -10 -15 25 -10 -5 INPUT POWER (dBm) NORMALIZED PHASE SHIFT (degrees) 0 0V 2V 5V -3 -4 -5 -6 -7 -9 -10 -5 0 5 10 INPUT POWER (dBm) 5 10 15 20 25 Phase Shift vs. Pin @ 7 GHz -1 -2 0 INPUT POWER (dBm) Insertion Loss vs. Pin @ 15 GHz -10 -15 5 -8 -9 -11 -15 4 Insertion Loss vs. Pin @ 11 GHz 0 INSERTION LOSS (dB) INSERTION LOSS (dB) Insertion Loss vs. Pin @ 7 GHz -2 3 Vctl (Vdc) -8 9 - 82 25 5 0 INSERTION LOSS (dB) PHASE SHIFTERS - CONNECTORIZED MODULES 90 15 20 25 50 45 40 35 0V 2V 5V 30 25 20 15 10 5 0 -5 -10 -20 -15 -10 -5 0 INPUT POWER (dBm) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 5 HMC-C010 v00.0505 600° ANALOG PHASE SHIFTER MODULE, 6 - 15 GHz 15 0V 2V 5V 5 0 -5 -20 -15 -10 -5 0 INPUT POWER (dBm) 5 5 4 3 0V 2V 5V 2 1 0 -1 -2 -3 -4 -5 -20 -15 -10 -5 0 INPUT POWER (dBm) Absolute Maximum Ratings Control Voltage (Vctl) -1 Vdc to +8 Vdc Input Power (RFin) +25 dBm Channel Temperature (Tc) 150 °C Continuous Pdiss (T = 85 °C) (derate 21 mW/°C above 85 °C) 1.36 W Thermal Resistance (junction to ground paddle) 48 °C/W Storage Temperature -65 to +150 °C Operating Temperature -55 to +85 °C ESD Sensitivity (HBM) Class 1B For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 5 PHASE SHIFTERS - CONNECTORIZED MODULES 20 10 9 Phase Shift vs. Pin @ 15 GHz NORMALIZED PHASE SHIFT (degrees) NORMALIZED PHASE SHIFT (degrees) Phase Shift vs. Pin @ 11 GHz 9 - 83 HMC-C010 v00.0505 Outline Drawing PHASE SHIFTERS - CONNECTORIZED MODULES 9 600° ANALOG PHASE SHIFTER MODULE, 6 - 15 GHz NOTES: 1. PACKAGE, LEADS, COVER MATERIAL: KOVAR™ 2. BRACKET MATERIAL: ALUMINUM 3. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER ELECTROLYTIC NICKEL 75 MICROINCHES MIN. 4. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. TOLERANCES ±.005 [0.13] UNLESS OTHERWISE SPECIFIED. 6. FIELD REPLACEABLE SMA CONNECTORS. TENSOLITE 5602 - 5CCSF OR EQUIVALENT. 7. TO MOUNT MODULE TO SYSTEM PLATFORM REPLACE 0 -80 HARDWARE WITH DESIRED MOUNTING SCREWS. 9 - 84 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC-C010 v00.0505 600° ANALOG PHASE SHIFTER MODULE, 6 - 15 GHz Pin Number Function Description 1 RFIN & RF Ground RF input connector, SMA female, field replaceable. This pin is DC blocked and matched to 50 Ohms from 6 - 15 GHz. 2 RFOUT & RF Ground RF output connector, SMA female, field replaceable. This pin is DC blocked and matched to 50 Ohms from 6 - 15 GHz. 3 Vctl Phase shift control pin. Application of a voltage between 0 and 5 volts causes the transmission phase to change. The DC equivalent circuit is a series connected diode and resistor. GND Power supply ground. Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com PHASE SHIFTERS - CONNECTORIZED MODULES 9 Pin Descriptions 9 - 85