GBJ25005 thru GBJ2510 GLASS PASSIVATED REVERSE VOLTAGE FORWARD CURRENT BRIDGE RECTIFIERS - 50 to 1000Volts - 25 Amperes GBJ FEATURES ●Rating to 1000V PRV ? .134(3.4) ? .122(3.1) ●Ideal for printed circuit board ●Low forward voltage drop,high current capability .189(4.8) .173(4.4) .150(3.8) .134(3.4) 1.193(30.3) 1.169(29.7) ●Reliable low cost construction utilizing molded plastic ~ ~ _ .165(4.2) .142(3.6) .708(18.0) .669(17.0) .106(2.7) .096(2.3) + ? .134(3.4) ? .122(3.1) classification 94V-0 .441(11.2) .425(10.8) ●The plastic material has UL flammability .198 (5.1) .800(20.3) .776(19.7) technique results in inexpensive product .094(2.4) .078(2.0) .043(1.1) .035(0.9) .114(2.9) .098(2.5) .031(0.8) .023(0.6) .402(10.2) .303(7.7).303(7.7) SPACING .386(9.8) .287(7.3).287(7.3) Dimensions in inches and (milimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% SYMBOL GBJ 25005 GBJ 2501 GBJ 2502 GBJ 2504 GBJ 2506 GBJ 2508 GBJ 2510 UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 30 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V CHARACTERISTICS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (with heatsink Note 2) @ TC=100℃ (without heatsink) 25.0 I(AV) 4.2 A Peak Forward Surage Current 8.3ms Single Half Sine-Wave IFSM 350 A VF 1.1 V Super Imposed on Rated Load (JEDEC Method) Maximum Forward Voltage at 12.5A DC Maximum DC Reverse Current @ TJ=25℃ at Rated DC Blocking Voltage @ TJ=125℃ 10.0 IR 500 uA I2t Rating for Fusing (t<8.3ms) I2t 510 A2s Typical Junction Capacitance Per Element (Note1) CJ 85 pF RθJC 0.6 ℃/W TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Typical Thermal Resistance (Note2) Operating Temperature Range Storage Temperature Range NOTES: 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Device mounted on 300mm*300mm*1.6mm cu plate heatsink. ~ 323 ~ RATING AND CHARACTERTIC CURVES GBJ25005 thru GBJ2510 FIG.2-MAXMUN NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT , AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE 25 WITH HEATSINK 20 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 15 10 WITHOUT HEATSINK 5 0 0 20 40 60 100 80 120 140 350 300 250 T J=150℃ SINGLE -SINE- WAVE (JEDEC METHOD) 200 150 100 50 0 1 2 20 50 100 NUMBER OF CYCLES AT 60Hz CASE TEMPERATURE, °C FIG.4-TYPICAL FORWARD CHARACTERISTICS FIG.3-TYPICAL JUNCTION CAPACITANCE 100 INSTANTANEOUS FORWARD CURRENT, (A) 1000 100 10 T J=25℃,f=1MHZ 10 1.0 T J = 25°C PULSE WIDTH 300us 0.1 1.0 1.0 10.0 0.01 100 0 0.2 REVERSE VOLTAGE,(VOLTS) 0.4 1000 T J=125℃ 100 T J=100℃ 10 T J=50℃ 1.0 T J=25℃ 0.1 0 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT ,(uA) CAPACITANCE,(pF) 10 5 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) ~ 324 ~ 1.8