AZ826 SUBMINIATURE ULTRA-SENSITIVE DIP RELAY FEATURES • • • • • • • • • • • Low profile for compact board spacing DC coils to 24 VDC Bifurcated crossbar contacts Ultra-sensitivity, 84 mW pickup Life expectancy to 10 million operations High switching capacity, 24 W, 125 VA Fits standard 16 pin IC socket Epoxy sealed for automatic wave soldering and cleaning Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric UL, CUR file E43203 CONTACTS GENERAL DATA Arrangement DPDT (2 Form C) Ratings Resistive load: Max. switched power: 24 W or 125 VA Max. switched current: 1 A Max. switched voltage: 150 VDC or 220 VAC Rated Load UL 1.0 A at 24 VDC 1.0 A at 125 VAC Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 1.0 A 120 VAC Res. Operate Time (typical) 6 ms at nominal coil voltage Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) Material Silver, gold plated Dielectric Strength 1500 Vrms contact to coil (at sea level for 1 min.) 500 Vrms between open contacts 1500 Vrms contact set to contact set Resistance < 50 milliohms initially Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 70°C (158°F) standard -40°C (-40°F) to 80°C (176°F) sensitive -40°C (-40°F) to 85°C (185°F) ultra-sensitive -40°C (-40°F) to 105°C (221°F) COIL Power At Pickup Voltage (typical) Storage 180 mW standard 100 mW sensitive 84 mW ultra-sensitive Vibration 1.5 mm DA at 10–55 Hz Max. Continuous Dissipation 1.2 W at 20°C (68°F) Shock 50 g 11 ms 1/2 sine Temperature Rise 34°C (61°F) standard 23°C (41°F) sensitive 19°C (34°F) ultra-sensitive Enclosure P.B.T. polyester Terminals Tinned copper alloy Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Temperature Max. 105°C (221°F) NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Other coil resistances and sensitivities available upon request. 4. Specifications subject to change without notice. 10/29/02W AZ826 RELAY ORDERING DATA STANDARD COIL SPECIFICATIONS Nominal Coil VDC Max. Continuous VDC 3 5 6 9 12 24 5.5 9.2 11.0 16.4 21.9 43.8 Nominal Coil VDC Max. Continuous VDC Coil Resistance ± 10% Must Operate VDC 25 70 100 225 400 1600 2.1 3.5 4.2 6.3 8.4 16.8 ORDER NUMBER AZ826-2C-3DME AZ826–2C–5DME AZ826–2C–6DME AZ826–2C–9DME AZ826–2C–12DME AZ826–2C–24DME SENSITIVE COIL SPECIFICATIONS Coil Resistance ± 10% Must Operate VDC ORDER NUMBER 3 7.3 45 2.1 AZ826-2C-3DSE 5 12.2 125 3.5 AZ826–2C–5DSE 6 14.7 180 4.2 AZ826–2C–6DSE 9 22.0 405 6.3 AZ826–2C–9DSE 12 29.0 720 8.4 AZ826–2C–12DSE 24 52.3 2880 16.8 AZ826–2C–24DSE ULTRA-SENSITIVE COIL SPECIFICATIONS Nominal Coil VDC Max. Continuous VDC 3 Coil Resistance ± 10% Must Operate VDC ORDER NUMBER 8.5 60 2.3 4.5 12.7 135 3.4 AZ826–2C–3DSSE AZ826–2C–4.5DSSE 5 14.2 167 3.8 AZ826–2C–5DSSE 6 17.0 240 4.5 AZ826–2C–6DSSE 9 25.4 540 6.8 AZ826–2C–9DSSE 12 33.9 960 9.0 AZ826–2C–12DSSE 24 67.9 3840 18.0 AZ826–2C–24DSSE MECHANICAL DATA .795 Max. (20.2 Max.) .390 Max. (9.9 Max.) .472 Max. (12.0 Max.) .010 (0.25) .028 (0.72) PC BOARD LAYOUT WIRING DIAGRAM 1 4 6 .016 (.04) .138 (3.5) 8 .300 (7.62 ) 16 13 11 9 Viewed toward terminals .300 (7.62) .200 .200 (5.08) (5.08) .0.39 DIA (0.8) 8 HOLES Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 10/29/02W