Datasheet HSA-X-2-40 2 GHz High-Speed Amplifier Features Bandwidth 10 kHz ... 2 GHz Rise Time 180 ps Gain 40 dB Input VSWR 1 : 1.1 Integrated Bias Circuit Applications Preamplifier for ultra-fast Detectors (Microchannel-Plates, Photomultipliers, Avalanche-Photodiodes and PIN-Photodiodes) Oscilloscope and Transient-Recorder Preamplifier Time-Resolved Pulse and Transient Measurements Block Diagram INPUT OUTPUT BIAS DC-Path 50 Ohm Ultra Wideband Amplifier Test Conditions Vs = + 15 V, Ta = 25°C, System Impedance = 50 Ω Gain Gain Gain Accuracy Gain Flatness (overall) 40 dB ± 1 dB ± 0.3 dB Frequency Response Lower Cut-Off Frequency Upper Cut-Off Frequency 10 kHz 2 GHz Time Response Rise / Fall Time (10% - 90%) 180 ps Input DC Input Impedance RF Input Impedance 50 Ω Noise Figure Equivalent Input Voltage Noise Input VSWR Maximum Input VSWR 50 Ω 50 Ω 5.1 dB 670 pV/√Hz 1 : 1.1 1 : 1.3 Output Impedance Output Power P1dB Output Peak-Peak Voltage 50 Ω + 10.5 dBm (@ f < 1 GHz) 1.9 Vpp (@ f < 500 MHz, for linear Amplification) Specifications Output (@ f < 1 GHz) (@ f < 1 GHz) (@ f < 1 GHz) (@ f < 3 GHz) SOPHISTICATED TOOLS FOR SIGNAL RECOVERY DB-E-0602-10 / R 64 / SG / Date: 01.09.03 / 2 Pages Datasheet HSA-X-2-40 2 GHz High-Speed Amplifier Power Supply Supply Voltage Supply Current + 15 V + 125 mA Case Weight Material 100 gr. (0.23 lbs) AlMg4.5Mn, nickel-plated Temperature Range Storage Temperature - 40 ... + 100 °C Operating Ambient Temperature 0 ... + 60 °C Operating Case Temperature 40 °C Absolute Maximum Ratings Power Supply Voltage DC and LF Input Voltage RF Input Power + 20 V ±4V + 13 dBm Connectors Input SMA Output SMA Power Supply LEMO Series 1S, 3-pin fixed Socket Pin 1: + 15 V Pin 2: n.c. Pin 3: GND PIN 2 PIN 1 +Vs PIN 3 GND Dimensions OUT 43 mm IN POWER 22 mm 54 mm M4 UNC 8-32 DZ01-0601-10 FEMTO Messtechnik GmbH Paul-Lincke-Ufer 34 D-10999 Berlin Germany Tel.: +49 (0)30 – 4 46 93 86 Fax: +49 (0)30 – 4 46 93 88 e-mail: [email protected] http://www.femto.de Specifications are subject to change without notice. Information furnished herin is believed to be accurate and reliable. However, no responsibility is assumed by FEMTO Messtechnik GmbH for its use, nor for any infringement of patents or other rights granted by implication or otherwise under any patent rights of FEMTO Messtechnik GmbH. Product names mentioned may also be trademarks used here for identification purposes only. by FEMTO Messtechnik GmbH Printed in Germany SOPHISTICATED TOOLS FOR SIGNAL RECOVERY Page 2