ETC LM1085

3A L.D.O. VOLTAGE REGULATOR (Adjustable & Fixed)
FEATURES
●
●
●
●
●
●
●
●
TO-220 PKG
Low Dropout Voltage 500mV at 3A Output Current
Fast Transient Response
0.015% Line Regulation
0.1% Load Regulation
Internal Thermal and Current Limiting
Adjustable or Fixed Output Voltage(1.5, 2.5, 2.85, 3.0, 3.3, 5.0V)
Surface Mount Package SOT-223 & TO-263 (D2 Package)
100% Thermal Limit Burn-in
APPLICATIONS
●
●
●
●
●
●
●
●
●
LM1085
TO-263 PKG
Battery Charger
Adjustable Power Supplies
Constant Current Regulators
Portable Instrumentation
High Efficiency Linear Power Supplies
High Efficiency "Green" Computer Systems
SMPS Post-Regulator
Power PC Supplies
Powering VGA & Sound Card
1. Adj/Gnd 2. Output 3. Input
ORDERING INFORMATION
Device & Marking
LM1085T-X.X
LM1085R-X.X
DESCRIPTION
Package
TO-220
TO263 (D2)
(XX=Vout=1.5V, 2.5V, 2.85V, 3.0V, 3.3V, 5.0V
Adjustable= AD)
The LM1085 is a low dropout three terminal regulator with 3A output current capability.
The output voltage is adjustable with the use of a resistor divider. Dropout is guaranteed at a maximum
of 500 mV at maximum output current.
It's low dropout voltage and fast transient response make it ideal for low voltage microprocessor
applications. Internal current and thermal limiting provides protection against any overload condition
that would create excessive junction temperature.
TEST & TYPICAL APPLICATION CIRCUIT
2
3
VIN
5V
VOUT
3.33V
LM1085
+
1
ADJ
VREF
C1
10㎌
RF1
124Ω
1%
VREF=VOUT-VADJ=1.25V(Typ.)
VOUT=VREFx(1+RF2/RF1)+IADJxRF2
IADJ=55㎂(Typ.)
C2
10㎌
RF2
205Ω
1%
(1) C1 Needed if device is far away
from filter capacitors.
(2) C2 Required for stability
Adjustable Voltage Regulator
Mar. 2006 - Rev 06
84
HTC
LM1085
3A L.D.O. VOLTAGE REGULATOR (Adjustable & Fixed)
ABSOULTE MAXIMUM RATINS
SYMBOL
VALUE
Vin
7
V
Operating Junction Temperature Range
Topr
0~125
℃
Storage Temperature Range
Tstg
-65~150
℃
Tjc
3
C/W
CHARACTERISTIC
Supply Voltage
Thermal Resistance Junction to Case TO-263
UNIT
Thermal Resistance Junction to Ambient TO-263
Tja
60
C/W
Lead Temperature (Soldering) 10 sec.
Tsol
300
℃
Maximum Output Current
Imax
3
A
ELECTRICAL CHARACTERISTICS I
OUT =100㎃,
PARAMETER
TA=25℃, unless otherwise specified
TEST CONDITIONS
MIN
TYP
MAX
UNIT
1.485
1.5
1.515
V
0<IOUT<3A, 3.5V<V IN<10V
2.475
2.5
2.525
V
0<IOUT<3A, 4.35V<V IN<10V
2.821
2.85
2.878
V
0<IOUT<3A, 4.5V<V IN<10V
2.97
3
3.03
V
0<IOUT<3A, 4.75V<V IN<10V
3.267
3.3
3.333
V
0≤IOUT≤3A, 5.5V≤VIN<10V
4.95
5
5.05
V
1.5V Version
Output Voltage
0<IOUT<3A, 2.75V<V IN<10V
2.5V Version
Output Voltage
2.85V Version
Output Voltage
3.0V Version
Output Voltage
3.3V Version
Output Voltage
5.0V Version
Output Voltage
All Voltage Options
Reference Voltage (V REF)
VIN≤7V,P≤PMAX
1.238
1.25
1.263
1.5V≤(VIN-VOUT)≤5.75V, 10㎃≤IOUT≤3A
1.225
1.25
1.27
Min. Load Current(Note 3)
1.5V≤(VIN-VOUT)≤5.75V
Line Regulation (ΔV REF(VIN))
2.75V≤VIN≤7V, IOUT=10㎃, TJ=25℃
V
5
10
mA
0.005
0.2
%
Load Regulation (ΔV REF(VOUT))
10㎃≤IOUT≤3A,(VIN-VOUT)=3V,TJ=25℃
0.05
0.3
%
Dropout Voltage
ΔVREF=1% , Iout=3A
1.1
1.2
V
Current Limit
Vin-Vout=3V
IOUT(MAX)
Long Term Stability
Thermal Regulation
(ΔVOUT(Pwr))
Output Noise, RMS
Thermal Resistance
1.4V≤(VIN-VOUT) Adjustable Only
3.2
4.0
A
TA=125℃, 1000Hrs
0.3
1
%
TA=25℃, 30㎳ pulse
0.01
0.02
%/W
10Hz to 10Khz TA=25℃
%/Vo
0.003
Junction to Tab
3
Junction to Ambient
60
Mar. 2006 - Rev 06
85
℃/W
HTC