MICROSEMI GG72220

GG72220
®
TM
ABSORPTIVE SPDT SWITCH MODULES with TTL Driver
RoHS Compliant
DESCRIPTION
KEY FEATURES
 Multi Octave Frequency
Ranges
 Hermetically Sealed
 Microstrip/Stripline Compatible
 Consistent VSWR
This series of modules meets RoHS requirements per EU Directive
2002/95/EC. The standard terminal finish is gold unless otherwise
specified. Consult the factory if you have special requirements.
 Internal TTL Driver
 RoHS Compliant
www.MICROSEMI.com
Microsemi – Lowell’s switch modules provide an economical way of
achieving a switch function from UHF through Ku band. These switch
modules provide broadband, high performance characteristics in a
small package. Our catalog parts are basic examples of our
capability. We will be glad to explore your specific requirements with
the goal of providing custom parts for your needs.
IMPORTANT: For the most current data, consult MICROSEMI’s website: www.MICROSEMI.com
These devices are ESD sensitive and must be handled use using ESD precautions.
APPLICATIONS/BENEFITS
ABSOLUTE MAXIMUM RATINGS AT 25º C
(UNLESS OTHERWISE SPECIFIED)
Rating
 Drop in Module
Symbol
Value
Unit
Storage Temperature
TSTG
-55 to +125
ºC
Operating Temperature
TOP
-55 to +95
ºC
RF CW Power Handling
PCW
0.5
W
 Broadband (0.5 – 18 GHz)
GG72220
Copyright  2006
Rev.: 2009-02-02
Microsemi
Microwave Products
75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748
Page 1
GG72220
ABSORPTIVE SPDT SWITCH MODULES with TTL Driver
®
TM
RoHS Compliant
GUARANTEED ELECTRICAL PARAMETERS @ 25C (unless otherwise specified)
Model Number
Insertion Loss1 (dB)
(Max)
Isolation(dB)
(Min)
VSWR
(Max)
TRISE
(Max)
TFALL
(Max)
GG72220-01
0.5 - 4.0
1.7
60
1.7:1
1.0
1.0
GG72220-02
2.0 - 8.0
2.1
55
1.7:1
1.0
1.0
GG72220-03
4.0 - 12.4
2.4
50
1.8:1
1.0
1.0
GG72220-04
8.0 - 18.0
2.9
40
1.9:1
1.0
1.0
GG72220-05
2.0 - 18.0
2.9
40
2.0:1
1.0
1.0
Notes:
1. RF Power Handling; .5W CW.
2. Switching Speed: 1.0µS (max).
3. Required D.C. Bias: +5v @ +75mA (max) and -8 to -15v @ -50mA (max)
4. Switching Speed is measured from the 50% point of the TTL pulse to the 90%-10% of the detected RF pulse with a 100 kHz maximum
switching rate.
5. Temperature Rating: Operating, -55 to +95°C; Storage, -55 to =125°C.
6. Only the switched arms, J1 & J2 are matched in the isolated state. The common arm is matched only when one path is in the loss state.
ENVRONMENTAL CONDITIONS
ENVIRONMENTAL
TEST
These units are designed to withstand the following
environmental conditions without damage.
OUTLINE 210015
MIL-PRF METHOD CONDITION
Internal Visual
883
2017
--
Stabilization Bake
883
1008
B
Thermal Cycle
883
1010
B
Constant
883
2001
1 (Y1 Axis)
Seal – Fine Leak
883
1014
A1
Seal – Gross Leak
883
1014
C1
External Visual
883
2009
--
NOTES
Microsemi
Microwave Products
75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748
ELEC / MECH
1. All pins are 0.012 ±0.001" dia, 0.100" (min) long.
May be supplied with tabs, 0.025 ±0.01 x 0.006
±0.002, upon request.
2. Tolerance on 3 place decimal, ±0.003" unless
otherwise specified.
3. Case and leads gold plated per MIL-G-45204,
Type 3, Grade A 50 µinch (min).
Copyright  2006
Rev.: 2009-02-02
www.MICROSEMI.com
Frequency
Range
SWITCHING
2
SPEED (uS)
Page 2