BCcomponents DATA SHEET MKP 336 1 Interference suppression film capacitors Product specification Supersedes data of April 1999 File under BCcomponents, BC05 2000 Feb 08 BCcomponents Product specification Interference suppression film capacitors MKP 336 1 MKP RADIAL POTTED TYPE PITCH 10/15/22.5/27.5 mm 296x12(full_width) P =10 mm P = 15 mm P = 22.5 and 27.5 mm CBA207 Fig.1 Simplified outlines. FEATURES QUICK REFERENCE DATA • 10 to 27.5 mm lead pitch • Supplied loose in box and taped on reel DESCRIPTION VALUE Capacitance range (E12 series) 1 nF to 1 µF Capacitance tolerance ±20%; ±10%; ±5% Rated (AC) voltage, 50 to 60 Hz 275 V Rated (DC) voltage 630 V Climatic category 55/100/21/B Rated temperature 100 °C APPLICATIONS Maximum application temperature 100 °C • For X1 electromagnetic interference suppression Reference specifications IEC 60384-14 2nd edition and EN 132400 • Specially designed to meet the NEW REQUIREMENTS of the new “IEC 60384-14 2nd edition and EN 132400”, requiring a 4 kV peak pulse voltage test UL1414 and CSA-C22.2 No. 1 specifications. Safety approvals: • Consists of a low-inductive wound cell of metallized polypropylene film, potted in a flame-retardant case. DETAIL SPECIFICATION For more detailed data and test requirements see “Type detail specification HQN-384-14/108”. 250 V UL1414; CSA-C22.2 No 1; note 2 275 V UL1283; SEV; VDE; FI; N; D; S; IMQ; ÖVE; note 2 CCEE; note 1 Materials qualified in accordance with UL94V-O Safety class X1 Notes 1. Pending. 2. Approved. 2000 Feb 08 2 BCcomponents Product specification Interference suppression film capacitors MKP 336 1 SAFETY APPROVALS SAFETY APPROVALS (X1) VOLTAGE VALUE FILE NUMBERS UL1414 250 V (AC) 1 nF to 1 µF E 112471 UL1283 275 V (AC) 1 nF to 1 µF E 109565 CSA-C22.2 No.1 250 V (AC) 1 nF to 1 µF LR 94054 SEV (EN132400) 275 V (AC) 1 nF to 1 µF 99,6 60107,01 VDE (EN132400) 275 V (AC) 1 nF to 1 µF 83619 FI (EN132400) 275 V (AC) 1 nF to 1 µF 178882 N NEMKO (EN132400) 275 V (AC) 1 nF to 1 µF P99102660 D DEMKO (EN132400) 275 V (AC) 1 nF to 1 µF 99-06011 SEMKO (EN132400) 275 V (AC) 1 nF to 1 µF 9447024 IMQ (EN132400) 275 V (AC) 1 nF to 1 µF V 3731 ÖVE (EN132400) 275 V (AC) 1 nF to 1 µF E 260-001 V D E .. OVE 2000 Feb 08 3 BCcomponents Product specification Interference suppression film capacitors MKP 336 1 COMPOSITION OF CATALOGUE NUMBER TYPE AND PITCHES 10.0 mm MULTIPLIER (nF) 336 1 15.0 mm 0.1 2 X1 22.5 mm CAPACITANCE 1 3 (numerically) 10 4 100 5 27.5 mm Example: 104 = 10 x 10 = 100 nF 2222 TYPE PACKAGING(1) 336 1 X1 336 1X XX X LEAD CONFIGURATION lead length 3.5 mm loose in box C-TOL ±20% lead length 25.0 mm PREFERRED TYPES 2222 336 10... 2222 336 16... ON REQUEST 336 1 X1 loose in box taped on reel lead length 3.5 mm ±10% lead length 25.0 mm H = 18.5 mm; note 2 2222 336 11... 2222 336 17... ±20% 2222 336 13... ±10% 2222 336 14... Notes 1) For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available. 2) H = in-tape height; for detailed specifications refer to this handbook, chapter “Packaging information”. 2000 Feb 08 4 BCcomponents Product specification Interference suppression film capacitors MKP 336 1 MKP 336 1 GENERAL DATA PITCH 10/15 mm b l 296x12(full_width) h lt Ødt P CBA196 Fig.3 Outline. Specific reference data for the 275 V AC (X1) capacitors VALUE DESCRIPTION at 10 kHz at 100 kHz ≤10 × 10−4 ≤50 × 10−4 Tangent of loss angle: C ≤ 100 nF Rated voltage pulse slope (dU/dt)R at 385 V (DC) P = 10 mm 200 V/µs P = 15 mm 500 V/µs R between leads, for C ≤ 0.33 µF at 100 V; 1 minute >15000 MΩ R between leads and case; 100 V; 1 minute >30000 MΩ Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 3400 V; 1 minute Withstanding (AC) voltage between leads and case 2050 V; 1 minute 2000 Feb 08 5 BCcomponents Product specification Interference suppression film capacitors MKP 336 1 URac = 275 V (X1); URdc = 630 V CATALOGUE NUMBER C (µF) DIMENSIONS b×h×l (mm) LOOSE IN BOX MASS (g) lt = 3.5 +1/−0.5mm(1) lt = 25.0 ±2.0 mm C-tol = ±20% catalogue number(2) last 5 digits(2) 2222 336 10102 .. 16102 2222 336 10152 .. 16152 0.0022 2222 336 10222 .. 16222 0.0033 2222 336 10332 .. 16332 2222 336 10472 .. 16472 2222 336 10682 .. 16682 2222 336 10103 .. 16103 2222 336 19001 .. 19007 2222 336 10153 .. 16153 2222 336 10223 .. 16223 Pitch = 10.0 ±0.4 mm; dt = 0.60 ±0.06 mm 0.001 0.0015 0.0047 4.0 × 10.0 × 12.5 0.6 5.0 × 11.0 × 12.5 0.9 6.0 × 12.0 × 12.5 1.0 0.0068 0.01 Pitch = 15.0 ±0.4 mm; dt = 0.80 ±0.08 mm 0.01 0.015 5.0 × 11.0 × 17.5 1.2 0.022 0.033 6.0 × 12.0 × 17.5 1.4 2222 336 10333 .. 16333 0.047 7.0 × 13.5 × 17.5 1.9 2222 336 10473 .. 16473 0.068 8.5 × 15.0 × 17.5 2.6 2222 336 10683 .. 16683 10.0 × 16.5 × 17.5 3.1 2222 336 10104 .. 16104 0.1 Notes 1. lt = 3.5 ±0.3 mm for pitch = 15 mm. 2. The shading indicates preferred types. 2000 Feb 08 6 BCcomponents Product specification Interference suppression film capacitors MKP 336 1 MKP 336 1 GENERAL DATA PITCH 22.5/27.5 mm b l 296x12(full_width) h lt Ødt P CBA196 Fig.4 Outline. Specific reference data for the 275 V AC (X1) capacitors VALUE DESCRIPTION at 10 kHz at 100 kHz 100 nF < C ≤ 470 nF ≤20 × 10−4 ≤100 × 10−4 C > 470 nF ≤70 × 10−4 − Tangent of loss angle: Rated voltage pulse slope (dU/dt)R at 385 V (DC) P = 22.5 mm P = 27.5 mm R between leads, for C ≤ 0.33 µF at 100 V; 1 minute 300 V/µs 200 V/µs >15000 MΩ RC between leads, for C > 0.33 µF at 100 V; 1 minute >5000 s >30000 MΩ R between leads and case; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 3400 V; 1 minute Withstanding (AC) voltage between leads and case 2050 V; 1 minute 2000 Feb 08 7 BCcomponents Product specification Interference suppression film capacitors MKP 336 1 URac = 275 V (X1); URdc = 630 V CATALOGUE NUMBER C (µF) DIMENSIONS b×h×l (mm) LOOSE IN BOX MASS (g) lt = 3.5 ±0.3 mm lt = 25.0 ±2.0 mm C-tol = ±20% catalogue number(1) last 5 digits(1) Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm 0.1 7.0 × 16.5 × 26.0 3.2 2222 336 19003 .. 19008 0.15 8.5 × 18.0 × 26.0 4.4 2222 336 10154 .. 16154 0.22 10.0 × 19.5 × 26.0 5.5 2222 336 10224 .. 16224 Pitch = 27.5 ±0.4 mm; dt = 0.80 ±0.08 mm 0.22 11.0 × 21.0 × 31.0 7.8 2222 336 19005 .. 19009 0.33 13.0 × 23.0 × 31.0 10.4 2222 336 10334 .. 16334 0.47 15.0 × 25.0 × 31.0 12.8 2222 336 10474 .. 16474 0.68 18.0 × 28.0 × 31.0 17.2 2222 336 10684 .. 16684 1 21.0 × 31.0 × 31.0 20.4 2222 336 10105 .. 16105 Note 1. The shading indicates preferred types. 2000 Feb 08 8 BCcomponents Product specification Interference suppression film capacitors MKP 336 1 SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION CONSTRUCTION AND SHOCK Description In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: • Low-inductive wound cell of metallized polypropylene (PP) film, potted with epoxy resin in a flame-retardant polypropylene case • For pitches ≤15 mm capacitors shall be mechanically fixed by the leads. • Radial leads, solder-coated: – Copper clad steel wire for original pitch = 7.5, 10 and 15 mm (b ≤ 6 mm) • For larger pitches the capacitors shall be mounted in the same way and the body clamped. – Copper wire for original pitch = 15 (b ≥ 7 mm), 22.5 and 27.5 mm SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD • Small stand-off pips allow removal of solder flux etc. during cleaning of the printed-circuit board. The maximum length and width of film capacitors is shown in Fig.6: • Eccentricity as in Fig.6. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. 144x12(halfpage) MKP metallized polypropylene film • Product height with seating plane as given by “IEC 60717” as reference: hmax ≤ h + 0.3 mm. 144x12(halfpage) bmax = b + 0.3 mm eccentricity metal spray layer lmax = l + 0.3 mm connecting wire CBA116 CBA198 Fig.5 Construction. Fig.6 Lay-out. Mounting Storage temperature NORMAL USE • Storage temperature: Tstg = −25 to +40 °C with RH maximum 80% without condensation. The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to this handbook, chapter “Packaging information”. RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient temperature of 23 ±1 °C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 ±2%. For reference testing, a conditioning period shall be applied over 96 ±4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. 2000 Feb 08 9 BCcomponents Product specification Interference suppression film capacitors MKP 336 1 CHARACTERISTICS Capacitance CBA505 296x12(full_width) 4 ∆C/C (%) 2 typical 0 max. -2 -4 min. -6 -50 0 50 100 Tamb (°C) Fig.7 Capacitance change at 1 kHz as a function of temperature. Tangent of loss angle CBA877 296x12(full_width) 10 3 dissipation factor (x 10-4) 10 2 220 F 1µ C= µF 1 C≤ F< n F< 47 n ≤ 47 F<C C ≤ 10 nF 10 2 10 3 10 4 Fig.8 Tangent of loss angle as a function of frequency: typical curves. 2000 Feb 08 220 nF nF 10 n 10 1 10 0 10 1 C≤ 10 f (Hz) 10 5 BCcomponents Product specification Interference suppression film capacitors MKP 336 1 Impedance CBA208 296x12(full_width) 10 3 1 nF Impedance (Ω) 4.7 10 2 nF 10 n F 47 n 10 100 1 470 100 F nF nF 0 nF 10 0 10-1 10-2 10 4 10 5 10 6 10 7 f (Hz) 10 8 Fig.9 Impedance as a function of frequency: typical curves. Resonant frequency CBA878 2 296x12(full_width) 10 f (MHz) 10 1 10 0 X1 10-1 1nF 10 nF 100 nF 1000 nF C (nF) Fig.10 Resonant frequency as a function of capacitance: typical curves. 2000 Feb 08 11 BCcomponents Product specification Interference suppression film capacitors MKP 336 1 Maximum RMS voltage and AC current (sinewave) as a function of frequency for Tamb ≤ 100 °C CBA210 296x12(full_width) 10 3 AC voltage (V) 10 2 10 1 10 1 10 2 10 3 10 4 10 5 f (Hz) Fig.11 AC voltage (RMS value) as a function of frequency at Tamb ≤ 100 °C. CBA936 296x12(full_width) 10 3 1000 nF AC current (mA) 10 470 nF 2 100 nF 47 nF 10 1 10 nF 4.7 nF 10 0 10 -1 10 1 1 nF 10 2 10 3 10 4 f (Hz) Fig.12 AC current (RMS value) as a function of frequency at Tamb ≤ 100 °C. 2000 Feb 08 12 10 5 BCcomponents Product specification Interference suppression film capacitors MKP 336 1 Insulation resistance CBA204 296x12(full_width) 10 6 RC (s) 10 5 10 4 0 20 40 60 80 Tamb(°C) 100 Fig.13 RC product as a function of ambient free air temperature: typical curve. APPLICATION NOTES • For X1 electromagnetic interference suppression in across the line applications (50/60 Hz) with a maximum mains voltage of 275 V (AC). • These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse program must be used, such as: 2222 375 .....; 2222 383 ..... or 2222 479 ..... • The maximum ambient temperature must not exceed 100 °C. • Rated voltage pulse slope: – If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 385 V (DC) and divided by the applied voltage. 2000 Feb 08 13 BCcomponents Product specification Interference suppression film capacitors MKP 336 1 MARKING Product marking The capacitors are marked by laser print; on the top for pitch ≥ 22.5 mm (see Fig.16), on the top and one side for pitch = 15 mm (see Fig.15) or on one side for pitch = 10 mm (see Fig.14) with the following information: FRONT FACE 144x12(halfpage) 1. Rated capacitance code in accordance with “IEC 60062” PB501 N D V D E ÖVE 10n M 336 1 BC 275V~X1 250V~ 2. Tolerance on rated capacitance; M = ±20%; K = ±10%; J = ±5% 3. Rated (AC) voltage (275 V) CBB055 4. Sub-class (e.g. X1) Fig.14 Example of marking for a capacitor with pitch = 10 mm. 5. Manufacturer’s type designation (e.g. 336 1) 6. Code for dielectric material (MKP) for pitch ≥15 mm 7. Manufacturer 8. Year and week of manufacture (e.g. 0001) for pitch ≥15 mm 9. Safety approvals: products will be marked with approvals depending on the available marking space per product. Although all approvals remain valid as indicated in the reference data. HEAD FACE 144x12(halfpage) FRONT FACE 100n M 275V~X1 336 1 MKP BC 0001 250V~ PB501 OVE V D E EN132400 CBB056 Fig.15 Example of marking for a capacitor with pitch = 15 mm. HEAD FACE 144x12(halfpage) 220n M 275V~X2 OVE 336 1 MKP PB501 BC 0001 EN132400 250V~ V D E CBB057 Fig.16 Example of marking for a capacitor with pitch = 22.5 or 27.5 mm. 2000 Feb 08 14 BCcomponents Product specification Interference suppression film capacitors MKP 336 1 Package marking The package containing the capacitors is marked as shown Fig.17. Barcode label marking LINE MARKING EXPLANATION 1 Manufacturer’s name 2 Country of origin 3 Sub-family 4 Type description and sub class 5 Capacitance value, tolerance, voltage and climatic category (“IEC 60068-1”) 6 Safety approvals 7 Preference origin code: A Country of origin in code: 170 (Belgium) Responsible production centre: HQ Work order: WO Wage number of final inspection (only for capacitors with pitch = 10 mm) 8 Product type description 9 Quantity and production period, year and week code 10 Product code (12NC) Fig.17 Barcode label. 2000 Feb 08 15 BCcomponents Product specification Interference suppression film capacitors MKP 336 1 QUICK REFERENCE TEST REQUIREMENTS (see note 1) TEST PROCEDURE (quick reference) REQUIREMENTS Robustness of leads Tensile strength: “IEC 60068-2-21” load 10 N; 10 s Bending: “IEC 60068-2-21” load 5 N; 4 × 90 ° Resistance to soldering heat: “IEC 60068-2-20” solder bath: 260 °C; 10 s Component solvent resistance no visible damage legible marking ∆C/C ≤ 5% ∆tan δ ≤ 100 × 10−4 (C ≤ 100 nF); note 2 ∆tan δ ≤ 200 × 10−4 (100 nF < C ≤ 470 nF); note 2 −4 isopropyl alcohol; 23 °C; 5 minutes ∆tan δ ≤ 70 × 10 (C > 470 nF); note 2 Robustness of component Rapid change of temperature: “IEC 60068-2-14” 5 cycles 1 cycle = 30 minutes at −55 °C and 30 minutes at 100 °C Vibration: “IEC 60068-2-6” 10 to 55 Hz; amplitude 0.75 mm; 6 hours Shock: “IEC 60068-2-27” half sinewave; 490 m/s2; 11 ms ∆C/C ≤ 5% ∆tan δ ≤ 100 × 10−4 (C ≤ 100 nF); note 2 ∆tan δ ≤ 200 × 10−4 (100 nF < C ≤ 470 nF); note 2 ∆tan δ ≤ 70 × 10−4 (C > 470 nF); note 2 Climatic sequence Dry heat: “IEC 60068-2-2” 16 hours; 100 °C Damp heat, cyclic, test Db, first cycle: “IEC 60068-2-30” Cold: “IEC 60068-2-1” ∆C/C ≤ 5% ∆tan δ ≤ 100 × 10−4 (C ≤ 100 nF); note 2 ∆tan δ ≤ 200 × 10−4 (100 nF < C ≤ 470 nF); note 2 ∆tan δ ≤ 70 × 10−4 (C > 470 nF); note 2 2 hours; −55 °C Damp heat, cyclic, test Db, remaining cycles: “IEC 60068-2-30” Voltage proof: “IEC 60384-14” Rins ≥ 50% of specified value Vp = 1200 V (DC); 1 minute Other applicable tests Damp heat, steady state: “IEC 60068-2-3” 21 days; 40 °C; 90 to 95% RH no load Vp = 1200 V (DC); 1 minute ∆C/C ≤ 5% Endurance (AC): “IEC 60384-14” 3 × 4.0 kV pulse voltage ∆C/C ≤ 10% 2000 Feb 08 ∆tan δ ≤ 70 × 10−4 Rins ≥ 50% of specified value 1000 hours; 1.25 × URac at ∆tan δ ≤ 100 × 10−4 (C ≤ 100 nF); note 2 100 °C; once per hour; 0.1 s; ∆tan δ ≤ 200 × 10−4 (100 nF < C ≤ 470 nF); note 2 1000 V (RMS) via resistor of 47 Ω; ∆tan δ ≤ 70 × 10−4 (C > 470 nF); note 2 Vp = 1200 V (DC); 1 minute Rins ≥ 50% of specified value 16 BCcomponents Product specification Interference suppression film capacitors MKP 336 1 PROCEDURE (quick reference) TEST REQUIREMENTS ∆C/C ≤ 10% Charge and discharge: “IEC 60384-14” 10000 cycles; 5 ms; 1.5 × dV/dt Passive flammability: “IEC 60384-14” class B Active flammability: “IEC 60384-14” 20 × 4 kV discharge no burning Heat storage: “IEC 60384-14” 1000 hours; 100 °C ∆C/C ≤ 5% ∆tan δ ≤ 100 × 10−4 (C ≤ 100 nF); note 2 ∆tan δ ≤ 200 × 10−4 (100 nF < C ≤ 470 nF); note 2 ∆tan δ ≤ 70 × 10−4 (C > 470 nF); note 2 Rins ≥ 50% of specified value no burning ∆tan δ ≤ 100 × 10−4 (C ≤ 100 nF); note 2 ∆tan δ ≤ 200 × 10−4 (100 nF < C ≤ 470 nF); note 2 ∆tan δ ≤ 70 × 10−4 (C > 470 nF); note 2 Resistance to soldering heat preheating: 100 °C; with preheating: solder bath: 260 °C; 10 s “IEC 60384-14” Active flammability test ∆C/C ≤ 5% ∆tan δ ≤ 100 × 10−4 (C ≤ 100 nF); note 2 ∆tan δ ≤ 200 × 10−4 (100 nF < C ≤ 470 nF); note 2 ∆tan δ ≤ 70 × 10−4 (C > 470 nF); note 2 Voltage proof up to 2 × peak impulse voltage of 4.13 or until breakdown (100 V/sec, current limited 2mA) no burning Failed capacitors connected to a 250 V (AC) power supply during 5 minutes Notes 1. For detailed information: see “Type detail specification HQN-384-14/108”. 2. Measuring frequency 100 kHz for C ≤ 470 nF and 10 kHz for C > 470 nF. 2000 Feb 08 17

- Similar pages
- ETC 2.22234E+11
- ETC MKP3382
- ETC 222233840103
- ETC 222233860222