UK 4-TG General data Basic terminal block with screw connection, for component and fuse connectors, cross section: 0.2 - 4 mm², AWG: 28 - 12, width: 6.2 mm, color: gray Order number Type 2812018 UK 4-TG Barcode number Unit pack Customs tariff 4017918076733 50 Pcs. 85369010000 Technical data General Number of levels Number of connections Color Insulating material Inflammability class acc. to UL 94 1 2 gray PA V2 Dimensions Width Length Height NS 35:7,5 Height NS 35:15 Height NS 32 Phoenix Contact GmbH & Co. KG www.phoenixcontact.com 6.2 mm 42.5 mm 47 mm 54.5 mm 52 mm Page 1/7 Jul 15, 2003 UK 4-TG Technical data Maximum load current Rated surge voltage Contamination class Surge voltage category Insulating material group Connection in acc. with standard 16 A (with 4 mm² conductor cross section) 6 kV 3 III I IEC/ DIN VDE Connection data Min. conductor cross section, rigid Conductor cross section, rigid max. Conductor cross section flexible min. Max. conductor cross section, flexible Min. conductor cross section AWG/kcmil Conductor cross section AWG/kcmil max Min. conductor cross section, flexible, with ferrule with plastic sleeve Conductor cross section flexible, with ferrule without plastic sleeve max. Conductor cross section flexible, with ferrule with plastic sleeve min. Max. conductor cross section, flexible, with ferrule with plastic sleeve 2 conductors with same cross section, solid min. 2 conductors with same cross section, solid max. 2 conductors of the same cross section, flexible, min. 2 conductors with same cross section, flexible max. 2 conductors of the same cross section, flexible, ferrules without plastic sleeve, min. 2 conductors with identical cross section, flexible, ferrules with plastic sleeve, max. 2 conductors of the same cross section, flexible, TWIN ferrules with plastic sleeve, min. 2 conductors with identical cross section, flexible TWIN ferrules with plastic sleeve, max. Stripping length Screw thread Tightening torque Phoenix Contact GmbH & Co. KG www.phoenixcontact.com 0.2 mm² 4 mm² 0.2 mm² 4 mm² 24 12 0.25 mm² 2.5 mm² 0.25 mm² 2.5 mm² 0.2 mm² 1.5 mm² 0.2 mm² 1.5 mm² 0.25 mm² 1.5 mm² 0.5 mm² 1.5 mm² 9 mm M3 0.6 Nm Page 2/7 Jul 15, 2003 UK 4-TG Certificates UL Comments Nominal voltage UN Nominal current IN AWG/kcmil Comments Nominal voltage UN Nominal current IN AWG/kcmil Comments Nominal voltage UN Nominal current IN AWG/kcmil with ST-T plug 600 V 20 A 28-12 with ST-BE plug 600 V 5A 28-12 with ST-Si-UK 4 plug 300 V 6.3 A 28-12 CSA Nominal voltage UN Nominal current IN AWG/kcmil Phoenix Contact GmbH & Co. KG www.phoenixcontact.com 600 V 15 A 28-12 Page 3/7 Jul 15, 2003 UK 4-TG Drawings Approval logo Phoenix Contact GmbH & Co. KG www.phoenixcontact.com Page 4/7 Jul 15, 2003 UK 4-TG Accessories Item Designation Description 3003224 ATP-UK 3022218 CLIPFIX 35 3003020 1201442 D-UK 4/10 E/UK 1201002 NS 32 GELOCHT METER 1201015 NS 32 UNGELOCHT METER 1201028 NS 32-AL UNGELOCHT METER NS 32-CU/ 35 QMM UNGEL. METER NS 32-CU/120 QMM UNGEL. METER NS 35/ 7,5 GELOCHT METER Separating plate, for visual and electrical separation of terminal groups, width: 1.5 mm, color: Gray Snap-on end bracket, for 35 mm NS 35/7.5 or NS 35/15 mounting rail, can be fitted with Zack strip ZB 8 and ZB 8/27, terminal strip marker KLM 2 and KLM, width: 9.5 mm, color: gray Cover, width: 1.8 mm, color: gray End clamp, for supporting the electronic base, if mounted vertically, 2 end clamps are required in each case G-profile DIN rail, material: Steel, perforated, height 15 mm, width 32 mm, length 2 m G-profile DIN rail, material: Steel, unperforated, height 15 mm, width 32 mm, length 2 m G rail 32 mm (NS 32) Assembly 1201358 1201280 0801733 0801681 0801762 1201730 1201714 1201798 1201756 1201895 NS 35/15 UNGELOCHT METER NS 35/15-2,3 UNGELOCHT METER NS 35/15-AL UNGELOCHT METER NS 35/15-CU UNGELOCHT METER G-profile DIN rail, material: Copper, unperforated, height 15 mm, width 32 mm, length 2 m G-profile DIN rail, deep-drawn, material: Copper, unperforated, height 15 mm, width 32 mm, length 2 m DIN rail, material: Steel, perforated, height 7.5 mm, width 35 mm, length: 2 m DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m DIN rail, material: Steel, perforated, height 15 mm, width 35 mm, length: 2 m DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m DIN rail, deep-drawn, high profile, unperforated, 1.5 mm thick, material: Aluminum, height 15 mm, width 35 mm, length 2 m DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m EB 2- 6 EB 3- 6 EB 10- 6 Insertion bridge, 2-pos., fully insulated Insertion bridge, 3-pos., fully insulated Insertion bridge, 10-pos., divisible, fully insulated SBS 6:UNBEDRUCKT ZB 6:SO/CMS Marker cards for modular terminal blocks, color: white Zack strip, 10-section, divisible, special printing, marking according to customer requirements NS 35/ 7,5 UNGELOCHT METER NS 35/ 7,5-CU UNGELOCHT METER NS 35/15 GELOCHT METER Bridges 0201155 0201142 0201139 Marking 1007222 1050499 Phoenix Contact GmbH & Co. KG www.phoenixcontact.com Page 5/7 Jul 15, 2003 UK 4-TG Tools 1205053 SZS 0,6X3,5 Phoenix Contact GmbH & Co. KG www.phoenixcontact.com Screwdriver, bladed, matches all screw terminal blocks up to 4.0 mm² connection cross section, blade: 0.6 x 3.5 mm, without VDE approval Page 6/7 Jul 15, 2003 UK 4-TG Address Phoenix Contact GmbH & Co. KG Flachsmarktstr. 8 32825 Blomberg Germany Tel + 49 - (0) 52 35 - 3-00 Fax + 49 - (0) 52 35 - 3-4 12 00 www.phoenixcontact.com © Phoenix Contact Technical modifications reserved Phoenix Contact GmbH & Co. KG www.phoenixcontact.com Page 7/7 Jul 15, 2003